2001 Buick Regal Brake Master Cylinder

Brake Master Cylinder for Your 2001 Buick Regal

Search through our amazing selection of Brake Master Cylinder products for your 2001 Buick Regal to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  Wearever - Master Cylinder - Domestic (Part No. 10-2714)

  Description

  A1 CARDONE Remanufactured Master Cylinders provide reliable performance at the best price. All units are tested before leaving the factory to ensure like-new performance, providing a quality product you and your vehicle can rely on. Bleeding kits are provided for your convenience, allowing you to spend less time in the garage, and more time on the road. Couple this with CARDONE's Master Cylinder Bench Bleeder Tool, which cuts typical bleeding procedures in half.
  
  Product Features:

  • 100% computer testing ensures guaranteed, consistent performance
  • 100% new OE-quality seals and cups are installed to prevent leakage and ensure like-new performance and reliability. All rubber meets S.A.E. specifications.
  • Bleeding tubes are supplied with applicable applications to make the bleeding process faster and easier
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, which could cause premature failure
  • Cast iron master cylinders come with premium protective coating to minimize rust, extending on-car and on-shelf life
  • Piston assemblies are 100% height-gauged to meet or exceed O.E.M. performance
  • Plastic reservoirs are 100% vacuum-tested to ensure proper function

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 2

    2

    2018-05-25

    2

    2

    Master

    Master

    Submitted 2018-05-25

    By Anthony

    From undisclosed

    Went out right away but did it's job

    Bottom Line

    Went out right away but did it's job

    By Anthony from undisclosed

    BOTTOM LINE

  • 4

    4

    2018-02-03

    4

    4

    I would buy it again.

    I would buy it again.

    Submitted 2018-02-03

    By Kevin

    From undisclosed

    Part worked, did the bench bleed, had a small leak between master cylinder and brake booster when I bolted everything up. Started bleeding the brakes and the leak stopped. Must have had to be worked back and north to seal. No problems a week after installation.

    Bottom Line

    Part worked, did the bench bleed, had a small leak between master cylinder and brake booster when I bolted everything up. Started bleeding the brakes and the leak stopped. Must have had to be worked back and north to seal. No problems a week after installation.

    By Kevin from undisclosed

    BOTTOM LINE

  • 5

    5

    2017-10-22

    5

    5

    Would buy again

    Would buy again

    Submitted 2017-10-22

    By Meir

    From undisclosed

    fit and functioned perfectly.

    Bottom Line

    fit and functioned perfectly.

    By Meir from undisclosed

    BOTTOM LINE

  from $48.99

  View Product
• 

  Carquest Wearever - Master Cylinder - New (Part No. MCA390401)

  Description

  Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
  
  Product Features:

  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are "hard anodized"
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2018-05-25

    5

    5

    Would buy again

    Would buy again

    Submitted 2018-05-25

    By David

    From undisclosed

    Fit perfect. Easy to bleed.

    Bottom Line

    Fit perfect. Easy to bleed.

    By David from undisclosed

    BOTTOM LINE

  • 1

    1

    2018-05-14

    1

    1

    I will try a 2nd one.

    I will try a 2nd one.

    Submitted 2018-05-14

    By Jonah

    From undisclosed

    The new master cylinder failed after 60 miles of driving. I will be returning it.

    Bottom Line

    The new master cylinder failed after 60 miles of driving. I will be returning it.

    By Jonah from undisclosed

    BOTTOM LINE

  • 5

    5

    2018-04-23

    5

    5

    I hope I don't have to buy this item over and over

    I hope I don't have to buy this item over and over

    Submitted 2018-04-23

    By Daniel

    From undisclosed

    So far so good

    Bottom Line

    So far so good

    By Daniel from undisclosed

    BOTTOM LINE

  from $87.99

  View Product
• 

  ACDelco - Professional DuraStop Brake Master Cylinder (Part No. N3000577957ACD)

  Description

  ACDelco Professional DuraStop Brake Master Cylinders are manufactured to OE Specifications using both aluminum and iron castings. ACDelco master cylinders contain both Ethylene Propylene (EPDM) and Styrene Butadiene (SBR) rubber components to provide superior resistance to heat, corrosion, and leakage. ACDelco Professional DuraStop Brake Master Cylinders are ready to bench bleed and install right out of the box - no assembly required.
  
  Product Features:

  • Meets the brake performance requirements of SAE J1153 and J1154
  • Pressure tested to ensure safe and confident braking
  • Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear

  from $137.00

  View Product
• 

  WBR - Brake Master Cylinder (Part No. N3000594447WBR)

  Description

  WBR premium hydraulic brake cylinders are manufactured on state-of-the-art CNC machines, matching the exact OEM design with materials that meet the strict TS 16949 OEM certification. WBR brake master cylinders, wheel cylinders, clutch master and slave units use lightweight aluminum or cast iron to match the original design. The EPDM rubber used in WBR cylinders is a long-life formulation, 100% compatible with all types of brake fluid.
  
  Product Features:

  • Manufactured on state-of-the-art CNC machines
  • OEM design and materials
  • TS 16949 OEM certification
  • 100% compatible with all types of brake fluid

  from $93.54

  View Product