2000 Chevrolet Blazer Lift Support
Your 2000 Chevrolet Blazer might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Lift Support product you desperately need.
We currently carry 10 Lift Support products to choose from for your 2000 Chevrolet Blazer, and our inventory prices range from as little as $21.76 up to $28.99.
On top of low prices, Advance Auto Parts offers 5 different trusted brands of Lift Support products for the 2000 Chevrolet Blazer. We only sell parts from trusted brands like StrongArm so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 25 reviews on our Lift Support products for the 2000 Chevrolet Blazer from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Lift Support stock in-person!
Lift Support for Your 2000 Chevrolet Blazer
Search through our amazing selection of Lift Support products for your 2000 Chevrolet Blazer to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
StrongArm - Hatch Lift Support (Part No. C4287)
DescriptionOpening your vehicle's rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Read 3 review(s)Review snapshot ® by PowerReviews
-
GMC jimmy 2001 lift supports
GMC jimmy 2001 lift supports
Submitted 2021-02-19
By James
From Undisclosed
Perfect parts and 5 Minutes to put them in. Absolutely great.
Bottom Line NULL
-
I would definitely buy again!
I would definitely buy again!
Submitted 2021-02-13
By J
From Undisclosed
I watched a YouTube video on how to install the back glass lift support on my Blazer, but I really didn't need to watch it. Installation was pretty simple/easy! Make sure that you have another person with you to keep the gate glass lifted (while you take each lift support out of the groove-the glass may fall down and hit you with no support) I was done in less than 8 minutes. (unpackaging, removing the clip and old lift supports and install of the new lift supports)
Bottom Line NULL
-
i would reccomend this to a friend.
i would reccomend this to a friend.
Submitted 2020-09-17
By DALE
From Undisclosed
easy to install, work great
Bottom Line NULL
from $24.99
View Product -
StrongArm - Back Glass Lift Support (Part No. D4316)
DescriptionOpening your vehicle's rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Read 3 review(s)Review snapshot ® by PowerReviews
-
Did not fit
Did not fit
Submitted 2011-10-28
By Sully
From Savannah, GA
This item will not fit 2001 Chevy Blazer LS - two door.
Bottom Line NULL
-
Fits the 4 Door Model
Fits the 4 Door Model
Submitted 2011-01-16
By Mike
From Louisville, KY
This part fits the 4 door perfectly, however I had a heck of a time with Advance locating the right part. (Bill in the other review, must own a 2 door ) This website gives 53 results for 1998 Blazer. After 3 trips to Advance, I finally got the right part. Advance needs to improve this website to differentiate between submodels and number of doors. This would save people like myself and Bill, a lot of trouble. As to this part, only two complaints, 1. The manufacturer should include a top mounting pin and lock washer in the even that the original equipment is corroded or bad. 2. The Manufacturer should also include thin rubber washers OR incorporate rubber bushings into the part (like the OEM part had) to cut down on rattles. where it connects with the mounting pin. They work great as far as support, but I had to add thin rubber washers to eliminate rattles while driving.
Bottom Line recommended
-
does not fit
does not fit
Submitted 2010-02-02
By Bill
From Ocala, FL
Too short. Catalog is wrong. I returned it and store manager verified that the catalog is wrong.
Bottom Line not recommended
from $23.99
View Product -
StrongArm - Back Glass Lift Support (Part No. C4799)
DescriptionOpening your vehicle's rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
Read 2 review(s)Review snapshot ® by PowerReviews
-
Misleading Product
Misleading Product
Submitted 2012-06-10
By Giz
From Hopewell, Va
Product listed as right part for my 98 blazer but it did not fit , I will not order online to be shipped anymore.
Bottom Line not recommended
-
Doesn't Fit
Doesn't Fit
Submitted 2011-01-15
By MIKE
From LOUISVILLE, KY
This doesn't fit a 4 Door Blazer...they are too long. I believe THIS PART PROBABLY fits a 2 dr Blazer, as the rear glass on a 2Dr appears longer and has a steeper slope than its 4dr counterpart. [...]
Bottom Line not recommended
from $27.99
View Product -
Atlas Lift - Lift Support (Part No. LS10112)
DescriptionAtlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent "bouncing" or "Jumping" at the end of the stroke. Lift Supports' performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install - Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality - IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
from $26.99
View Product -
Atlas Lift - Lift Support (Part No. LS10931)
DescriptionAtlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent "bouncing" or "Jumping" at the end of the stroke. Lift Supports' performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install - Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality - IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
from $28.99
View Product -
Autopart International Inc - Hatch Window Strut (Part No. O20722209106API)
from $28.53
View Product -
Atlas Lift - Lift Support (Part No. LS10101)
DescriptionAtlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent "bouncing" or "Jumping" at the end of the stroke. Lift Supports' performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!
Product Features:- Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
- Easy Install - Less than 15 Minutes! based on average install time across all parts
- No Special Tools Required
- Certified Quality - IATF 16949 Certified- exceeds quality control standards and testing performance
- OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
- OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
- World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
- Trilingual Install Instructions provided inside each package
from $27.99
View Product -
International Suspension Group - International Suspension Group Hatch Window Strut (Part No. O2072315929ISG)
DescriptionISG gas charged lift supports are manufactured to OE performance and quality specifications, restores the original opening and closing speeds of your hood, hatch or trunk, are easy to install, no special tools required.
Product Features:- Exact replacement, engineered for your application.
- Rust-resistant piston rod extends product life.
- Easy lifting, reduced closing effort.
- Consistent lifting force through 50,000 cycles.
from $25.32
View Product -
StrongArm - Tailgate Lift Support (Part No. F4531)
DescriptionOpening your vehicle's rear hatch or checking under the hood should not be a serious safety hazard for you, your family or the technician working on your vehicle. Just like tire wear, your hood lift supports lose strength over time. Temperature changes, frequent usage, and driving environments all affect the lift power. StrongArm lift supports are designed for the everyday driver to be installed in minutes with no special tools required.
Product Features:- Heavy Gauge Steel Body
- Self-Cleaning Piston Assembly
- Rubber O-Ring Piston Seal
- Non-Stick Back-Up Ring
- Hardened Nitride Plated Steel Shaft
- Engineered In USA To OE Quality Standards For Performance And Durability
- IATF 16949, ISO 9001 Certified; Passes Extensive Quality Checks And Testing
- Easy To Install In Just Minutes. No Special Tools Required.
- Exact Fit Original Equipment Design Guarantees Correct Fit And Function
- Consistent Performance In All Weather Conditions
- Engineered And Built To Meet Or Exceed Original Equipment Quality Standards For Long Lasting Performance
- Replacing Your Worn Lift Supports Eliminates A Potentially Unsafe Condition In Your Vehicle
from $21.99
View Product -
Stabilus - Trunk Strut (Part No. O2064182167STB)
from $21.76
View Product
FAQs for 2000 Chevrolet Blazer Lift Support Products
What are the most popular Lift Support for the 2000 Chevrolet Blazer?
With 5 brands you can trust, our most popular Lift Support products for the 2000 Chevrolet Blazer parts are: