1999 Ford F-150
1999 Ford F-150 Heater Hose

TELL US WHAT YOU DRIVE TO SEE PARTS THAT FIT YOUR VEHICLE

1999 Ford F-150 Heater Hose

1999 Ford F-150 Heater Hose

Your 1999 Ford F-150 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Heater Hose product you desperately need.

We currently carry 17 Heater Hose products to choose from for your 1999 Ford F-150, and our inventory prices range from as little as $0.98 up to $223.99.

On top of low prices, Advance Auto Parts offers 4 different trusted brands of Heater Hose products for the 1999 Ford F-150. We only sell parts from trusted brands like CARQUEST by Dayco so that you can find quality parts you can count on.

Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 86 reviews on our Heater Hose products for the 1999 Ford F-150 from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Heater Hose stock in-person!

Heater Hose for Your 1999 Ford F-150

Search through our amazing selection of Heater Hose products for your 1999 Ford F-150 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87793)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

    Product Features:
    • Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    5.0
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    5.0
    5.0
    • 5
      5
      2020-07-31
      5
      5

      Hopefully I don't need another one .

      Hopefully I don't need another one .

      Submitted 2020-07-31

      By Jennifer

      From Undisclosed

      Perfect

      Bottom Line NULL

      Perfect

      By Jennifer from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2020-04-27
      5
      5

      Great part.

      Great part.

      Submitted 2020-04-27

      By William

      From Undisclosed

      Great part.

      Bottom Line NULL

      Great part.

      By William from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2019-03-03
      5
      5

      would buy again

      would buy again

      Submitted 2019-03-03

      By Donald

      From Undisclosed

      Fits perfect

      Bottom Line NULL

      Fits perfect

      By Donald from Undisclosed

      BOTTOM LINE NULL

    from $22.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87756)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

    Product Features:
    • Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    4.0
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.0
    4.0
    • 5
      5
      2020-04-27
      5
      5

      Great part.

      Great part.

      Submitted 2020-04-27

      By William

      From Undisclosed

      Great part.

      Bottom Line NULL

      Great part.

      By William from Undisclosed

      BOTTOM LINE NULL

    • 2
      2
      2019-12-23
      2
      2

      Yes

      Yes

      Submitted 2019-12-23

      By Gary

      From Undisclosed

      Same as factory

      Bottom Line NULL

      Same as factory

      By Gary from Undisclosed

      BOTTOM LINE NULL

    • 2
      2
      2019-03-06
      2
      2

      Longer hose would help

      Longer hose would help

      Submitted 2019-03-06

      By shawn

      From Undisclosed

      Hose is to short

      Bottom Line NULL

      Hose is to short

      By shawn from Undisclosed

      BOTTOM LINE NULL

    from $25.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-221)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    4.0
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.0
    4.0
    • 5
      5
      2020-10-22
      5
      5

      Yes

      Yes

      Submitted 2020-10-22

      By William

      From Undisclosed

      Good quality. I thought i was going to have to order it but it was in stock! I was able to get my work van back up and in service by the next day. Side note* if you have the 5.4 in a van, you do not have to pull the intake plenum to change this. Simply pull it out the back vis the dog box area and then slide the new one in. Literally was a 30 minute job!

      Bottom Line NULL

      Good quality. I thought i was going to have to order it but it was in stock! I was able to get my work van back up and in service by the next day. Side note* if you have the 5.4 in a van, you do not have to pull the intake plenum to change this. Simply pull it out the back vis the dog box area and then slide the new one in. Literally was a 30 minute job!

      By William from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2019-05-30
      5
      5

      Yes ,but hope I don't have too !

      Yes ,but hope I don't have too !

      Submitted 2019-05-30

      By Billy

      From Undisclosed

      It fit great and no leaks! Bracket and bolt holes lined up perfect.

      Bottom Line NULL

      It fit great and no leaks! Bracket and bolt holes lined up perfect.

      By Billy from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2019-01-17
      5
      5

      Yes

      Yes

      Submitted 2019-01-17

      By arnettte

      From Undisclosed

      Good Products

      Bottom Line NULL

      Good Products

      By arnettte from Undisclosed

      BOTTOM LINE NULL

    from $39.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87755)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

    Product Features:
    • Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    3.5
    Read 2 review(s)

    Review snapshot ® by PowerReviews

    3.5
    3.5
    • 2
      2
      2019-12-23
      2
      2

      Yes

      Yes

      Submitted 2019-12-23

      By Gary

      From Undisclosed

      Same as factory

      Bottom Line NULL

      Same as factory

      By Gary from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2012-11-19
      5
      5

      Made in USA quality

      Made in USA quality

      Submitted 2012-11-19

      By TA

      From Bridgewater,NJ

      Great value that is MADE IN USA. Fitment and function was perect.

      Bottom Line recommended

      Great value that is MADE IN USA. Fitment and function was perect.

      By TA from Bridgewater,NJ

      BOTTOM LINE recommended

    from $29.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-229)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    3.5
    Read 2 review(s)

    Review snapshot ® by PowerReviews

    3.5
    3.5
    • 2
      2
      2019-12-23
      2
      2

      Yes

      Yes

      Submitted 2019-12-23

      By Gary

      From Undisclosed

      Same as factory looks good

      Bottom Line NULL

      Same as factory looks good

      By Gary from Undisclosed

      BOTTOM LINE NULL

    • 5
      5
      2017-09-10
      5
      5

      What I epected nothing less.

      What I epected nothing less.

      Submitted 2017-09-10

      By Philip

      From undisclosed

      Hard to find item and my local Advance Auto Part store had it.

      Bottom Line NULL

      Hard to find item and my local Advance Auto Part store had it.

      By Philip from undisclosed

      BOTTOM LINE NULL

    from $34.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-517)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    2.0
    Read 2 review(s)

    Review snapshot ® by PowerReviews

    2.0
    2.0
    • 3
      3
      2019-07-31
      3
      3

      Didn't quote work.

      Didn't quote work.

      Submitted 2019-07-31

      By Christina

      From Undisclosed

      This part looked almost exactly like the original part. One of the bends in this metal tubing just wasn't quite right though and there was minimal clearance for error since this ran over the engine but below the intake manifold. This part would never have fit on my '04 F-250 with 5.4L engine without some redneck engineering and a hacksaw, which is ultimately what got me running again.

      Bottom Line NULL

      This part looked almost exactly like the original part. One of the bends in this metal tubing just wasn't quite right though and there was minimal clearance for error since this ran over the engine but below the intake manifold. This part would never have fit on my '04 F-250 with 5.4L engine without some redneck engineering and a hacksaw, which is ultimately what got me running again.

      By Christina from Undisclosed

      BOTTOM LINE NULL

    • 1
      1
      2017-12-18
      1
      1

      No

      No

      Submitted 2017-12-18

      By james

      From undisclosed

      Correct application Part won't fit . made in china part poorly made

      Bottom Line NULL

      Correct application Part won't fit . made in china part poorly made

      By james from undisclosed

      BOTTOM LINE NULL

    from $42.99

    View Product
  • Heater Hose Assembly Return

    Dorman - OE Solutions - Heater Hose Assembly Return (Part No. 626-219)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    1.0
    Read 1 review(s)

    Review snapshot ® by PowerReviews

    1.0
    1.0
    • 1
      1
      2018-04-16
      1
      1

      defective new hose

      defective new hose

      Submitted 2018-04-16

      By Jose

      From undisclosed

      brand new and I came defective , had to pay extra $300 to installed and reinstalled again

      Bottom Line NULL

      brand new and I came defective , had to pay extra $300 to installed and reinstalled again

      By Jose from undisclosed

      BOTTOM LINE NULL

    from $28.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87753)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

    Product Features:
    • Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    0.0

    from $57.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87754)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a quick connect end assembled onto the hose for fast, convenient installation. With this Dayco product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

    Product Features:
    • Made with a tough EPDM rubber compound this hose is made to resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    0.0

    from $28.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-212)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    0.0

    from $223.99

    View Product
  • Motorcraft Heater Hose

    Motorcraft - Motorcraft Heater Hose (Part No. R3030681112MTR)

    Description
    The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft hoses offer long-lasting quality - Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

    Product Features:
    • Ethylene-propylene diolefin monomer (EPDM) rubber reinforced with single rayon-braid tube
    • Provides resistance to the damaging effects of coolants, antifreeze and additives
    • Stands up to high pressures
    • Resists deterioration from heat, aging, ozone and underhood chemicals
    • Recommended by Ford Motor Company
    0.0

    from $112.09

    View Product
  • Heater Hose Assembly Outlet

    Dorman - OE Solutions - Heater Hose Assembly Outlet (Part No. 626-218)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    0.0

    from $55.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-222)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    0.0

    from $34.99

    View Product
  • Engine Heater Hose Assembly

    Dorman - OE Solutions - Engine Heater Hose Assembly (Part No. 626-558)

    Description
    This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

    Product Features:
    • Ideal replacement - this HVAC heater hose assembly directly replaces the original water outlet on specified vehicle years, makes and models
    • Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
    • Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
    • Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
    0.0

    from $33.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87865)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

    Product Features:
    • Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    0.0

    from $22.99

    View Product
  • Molded Heater Hose

    CARQUEST by Dayco - Molded Heater Hose (Part No. 87864)

    Description
    Dayco Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a quick connect end, Dayco's Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

    Product Features:
    • Made with a tough EPDM rubber compound this hose will resist the detrimental effects of heat, ozone and impacts from road debris
    • This hose meets SAE J20R4, Class D1 and SAE J1684 Type EC specifications
    • Highly resistant to electro-chemical degradation and premature stress cracking of the tube
    • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
    0.0

    from $15.99

    View Product
  • Premium 3/8 X 50 Ft Heater Hose by Gates (sold by each)

    Gates - Premium 3/8 X 50 Ft Heater Hose by Gates (sold by each) (Part No. 28409)

    Description
    Premium hose constructed for long service life.

    Product Features:
    • Good resistance to high temperatures for extended periods of time
    • Similar to SAE 20R3 Class D-5
    • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
    • CAUTION: Do not use for fuel or oil transfer applications.
    0.0

    from $0.98

    View Product

What are the top-rated 1999 Ford F-150 Heater Hose products?

Top-rated Heater Hose products for your 1999 Ford F-150 based on customer reviews/ratings are:
Dorman - OE Solutions Engine Heater Hose Assembly
4
Good Products
Dorman - OE Solutions Engine Heater Hose Assembly
3.5
Hard to find item and my local Advance Auto Part store had it.
Dorman - OE Solutions Engine Heater Hose Assembly
2
This part looked almost exactly like the original part. One of the bends in this metal tubing just wasn't quite right though and there was minimal cl