1998 Dodge Intrepid Transmission Parts

Below you will find various in-demand Dodge Transmission Parts, components and accessories for your 1998 Intrepid. Advance Auto Parts has popular Intrepid parts like Transmission Bearings, Transmission Seals, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Intrepid model years including 1995, 1996, 1997, 1999, 2000, 2001, 2002, 2003, 2004 and more. Select a category of 1998 Dodge Intrepid Transmission Parts below and start saving instantly.

Popular 1998 Dodge Intrepid Transmission Parts Categories

OE Transmission Coolers

Transmission Solenoids

Transmission Oil Cooler Lines

Pinion Bearings

Transmission Mounts

Transmission Master Repair Kits

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Gear Position Sensors

Automatic Transmission Oil Pump Seals

Automatic Transmission Speed Sensor Connectors

Input Shaft Bearings

Automatic Transmission Fluid Filler Tube Seals

Remanufactured Automatic Transmissions

Manual Transmission Bearing

Automatic Transmission Accumulator Piston

Essential Transmission Parts for 1998 Dodge Intrepids

from

$32.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$1776.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$366.99

AT MASTER REPAIR KIT

from

$73.99

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$301.99

An automatic transmission is a hydraulic multi-speed device that does not require any input from the vehicle operator other than selecting vehicle direction. Hydraulic pressure is controlled by a series of electronic shift solenoids that are commanded by the transmission control module. Planetary gear sets and hydraulically controlled shift plates and brake bands apply power to the main shaft in the transmission and out to the vehicles drive wheels.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$19.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 93-97; DODGE 93-97; EAGLE 93-97;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1993-1997
Weight approx: 5 Lbs
PART GROUP: 2795, 2795, 2810

from

$28.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 98-04; DODGE 98-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2004
Weight approx: 3 Lbs

from

$33.99

The transmission gear position sensor reports the location of the gear selector to the transmission or powertrain control module. The sensor input is used for back-up light illumination, transmission function as well as engine operating characteristics based on the position chosen.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$103.99

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

High grade materials that are equal to or better than OE provide durability and long service life
All ABS sensors are tested for proper fit, form, and function
Wire diameter and sheathing same or larger than OE to ensure product quality
Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
Includes all necessary brackets and hardware

from

$29.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$7.99

Product Features:

Brand may vary by location

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$3.99

AT SOLENOID SEAL

from

$34.99

Product Features:

OE MATCH: Manufactured to operational performance standards to meet or exceed OE fit, for and function to ensure proper monitoring of the transmission’s input shaft speed. Sensor output signal matches OE specifications.
THE DIFFERENCE: High strength thermoplastic is resistant to temperature, moisture and chemicals. Pre-installed O-ring precisely matches OE material and diameter for ease of installation and superior sealing.

from

$28.99

This automatic transmission speed sensor matches the fit and function of the original equipment sensor to restore critical speed-dependent vehicle functions. This part has been engineered and rigorously tested to ensure reliable performance.

Product Features:

Direct replacement – this automatic transmission speed sensor matches the fit and function of the original equipment sensor
Durable construction – this sensor is engineered to precise standards to ensure accurate signal output
Easy installation – this sensor is installed using the original hardware and plugs into the vehicle’s existing wiring
Quality tested – this part has undergone try-on validation and rigorous quality testing to ensure a quality fit and long service life

from

$56.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$16.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$9.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$12.99

AT TORQUE CONVT SEAL

from

$4.99

Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Upgrade your 1998 Dodge Intrepid with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1998 Dodge Intrepid, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Transmission Parts are key to keeping your Intrepid functioning at its best. At Advance Auto Parts, we offer a wide selection of 41 Transmission Parts for the 1998 Dodge Intrepid, designed to meet your needs without breaking the bank. From Transmission Bearing replacements to Transmission Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1998 Dodge Intrepid at great prices. Our Transmission Parts inventory for this model ranges from just $3.99 to $1,776.99, with an average price of $104.71. Our 41 Transmission Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 1998 Dodge Intrepid without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1998 Dodge Intrepid, we stock popular OEM and aftermarket Transmission Parts from top names like National, Dorman, Imperial, and more. National Transmission Parts start at just $14.99 and boast an impressive 4.3 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $28.99, and at an average 4.2 stars rating. With 342 customer reviews and counting, our 1998 Dodge Intrepid Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1998 Dodge Intrepid is always ready to roll. We’re committed to providing you with everything you need to keep your Intrepid in top shape, all in one place. Start shopping confidently below for your 1998 Dodge Intrepid!

Best-Selling Transmission Bearings for 1998 Dodge Intrepids

Enhance the driving experience in your Dodge with 6 quality Transmission Bearing components, starting at $7.99.

show more show less

from

$14.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$23.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Product Features:

Brand may vary by location

from

$34.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top Picks for 1998 Dodge Intrepid Automatic Transmission Parts

Upgrade Dodge Intrepids with top-quality Automatic Transmission Parts parts, including 6 OEM and aftermarket selections for your 1998 model.

show more show less

from

$3.99

AT SOLENOID SEAL

from

$1776.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$159.99

Remanufactured to meet or exceed OE quality, with inherent OE flaws corrected to improve longevity and performance.

Product Features:

All blocks are pretested
All blocks are serialized

from

$1776.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$301.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Precision-wound coated copper windings increase product durability and life cycle.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure product reliability, every time.

from

$4.99

Manufactured From High Quality Material
Engineered To The Specifications
Meets The Quality Standards
Designed For Performance And Durability
Easy To Install

In-Demand Transmission Cooler and Parts for 1998 Dodge Intrepids

Select from 13 premium Transmission Cooler and Parts parts for your 1998 Dodge Intrepid, with prices ranging from $25.99 to $104.99.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Product Features:

Imperial Maxi-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$61.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 6″
Sub-compact to compact cars
GVWR up to 18,000 lbs.
Compatible with OEM cooler systems
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$40.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 12-1/2″
Sub-compact to compact cars
GVWR up to 12,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$83.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$67.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$104.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$103.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

Most Sold 1998 Dodge Intrepid Transmission Mounts

Explore our best-selling Dodge parts for the 1998 Intrepid among 1 OEM and aftermarket options starting from $28.99.

show more show less

from

$28.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CHRY 98-04; DODGE 98-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1998-2004
Weight approx: 3 Lbs

Top-Rated Transmission Parts Brands For Your 1998 Dodge Intrepid

Shop for the best-rated brands offering Transmission Parts and other products for your 1998 Dodge Intrepids. Below you’ll find some of our best rated Transmission Parts from National, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 1998 Intrepid start at just $14.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1998 Dodge Intrepid Transmission Parts

When it comes to maintaining or upgrading your 1998 Dodge Intrepid, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1998 Dodge Intrepid. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $18.42. Plus, with over 13 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $14.99

(3)

Bearing Race

“Used on my diesel truck”

from $16.29

(3)

Multi-Purpose Seal

“Great quality parts at good prices.”

from $23.99

(7)

Tapered Roller Bearing Cone

“Good price”

Popular Dorman 1998 Dodge Intrepid Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 1998 Dodge Intrepid owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1998 Intrepid, Advance Auto Parts carries a full inventory of 1 Dorman Transmission Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Dorman Transmission Parts range up to $28.99, plus, with more than 17 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $28.99

(17)

Transmission Input Speed Sensor

“Totally groovy and happening in far out ways!”

FAQs for 1998 Dodge Intrepid Transmission Parts

Which Transmission Parts are best-sellers for 1998 Dodge Intrepids?

Out of 41 Transmission Parts that fit 1998 Dodge Intrepids, the following parts are the top sellers:

Tapered Roller Bearing Cone (5052513) – $23.99
Automatic Transmission Output Shaft Speed Sensor (12223198) – $38.99
Bearing Race (5052505) – $14.99

What’s the price range for 1998 Dodge Intrepid Transmission Parts?

Transmission Part prices for the 1998 Dodge Intrepid start at $3.99 and go up to $1,776.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1998 Dodge Intrepid?

The average price for Transmission Parts for the 1998 Dodge Intrepid is $104.71. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Dodge Intrepid model years?

Yes, we currently carry Transmission Parts for 10 model years of Dodge Intrepids between 1993 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 2003, 2002, 2001, 2000, 1999, 1997, 1996, and 1995.

What are the cheapest Transmission Parts for my 1998 Dodge Intrepid?

The cheapest 1998 Dodge Intrepid Transmission Parts we carry in stock are:

AT SOLENOID SEAL (11239035) – $3.99
42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (50074153) – $4.99
Tapered Roller Bearing (10659441) – $7.99
Oil Seal (5441773) – $9.99
AT TORQUE CONVT SEAL (11237521) – $12.99

What are the top-rated Transmission Parts that fit the 1998 Dodge Intrepid?

Out of 342 reviews by customers, our 1998 Dodge Intrepid Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1998 Dodge Intrepid and their top-rated products:

Transmission Cooler and Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
Transmission Seals
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99
Transmission Electrical Parts
- Maxi-Kool® XL Transmission Oil Cooler (12031443) – $73.99
- High Performance Transmission Oil Cooler (15230020) – $85.99
- Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (20230023) – $61.99

What types of Transmission Parts do you sell for my 1998 Dodge Intrepid?

As of 11/2/25, these are some of the most in-demand types of Transmission Parts for a 1998 Dodge Intrepid:

Can I get help with 1998 Dodge Intrepid Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Transmission Parts and more.

What is your return policy for Dodge Intrepid Transmission Parts?

Advance Auto Parts keeps returns simple. For new Dodge Intrepid Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1998 Dodge Intrepid Transmission Parts

Carquest Premium – Automatic Transmission Speed Sensor Connector (Part No.FAA1135)

Shift Pro by ETE – A606 Automatic Transmission Assembly (Part No.T151003)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

ATP – AT MASTER REPAIR KIT (Part No.TM-62)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-875)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4942)

FAG US – Cone (Part No.KLM603049)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2810)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2908)

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.SAC3781)

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1499)

Carquest Premium – Multi-Use Connector (Part No.PTA1218)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

Driveworks – Taper Bearing Set (Part No.S-A-36)

National – Bearing Race (Part No.M802011)

ATP – AT SOLENOID SEAL (Part No.JO-15)

NTK – Automatic Transmission Input Shaft Speed Sensor (Part No.AU0139)

Dorman – Transmission Input Speed Sensor (Part No.917-601)

Carquest Premium – Multi-Use Connector (Part No.PTA2923)

National – Multi-Purpose Seal (Part No.331228H)

Driveworks – Oil Seal (Part No.S-331228H)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

National – Tapered Roller Bearing Cone (Part No.M802048)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

National – Bearing Race (Part No.M802011)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)

FAG US – Bearing – TRB (Tapered Roller Bearing) (Part No.KT36)

FAG US – Cone (Part No.KLM603049)

National – Multi-Purpose Seal (Part No.331228H)

Driveworks – Oil Seal (Part No.S-331228H)

ATP – AT TORQUE CONVT SEAL (Part No.TO-4)

ATP – AT SOLENOID SEAL (Part No.JO-15)

Shift Pro by ETE – A606 Automatic Transmission Assembly (Part No.T151003)

Pro-King – Remanufactured Transmission Solenoid Block (Part No.RTS104)

Shift Pro by ETE – A606 Automatic Transmission Assembly (Part No.T151002)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBE4942)

Crown Auto Jeep Replacmnt – 42Rle/ 54Rfe/ 45Rfe/ 545Rfe/ 65Rfe/ 66Rfe Transmission (Part No.4446544)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool® XL Transmission Oil Cooler (Part No.243007)

Imperial – Plate and Fin Style Transmission Cooler, Light Duty, 3/4" x 5-7/8" x 11" (Part No.243006)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242009)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-875)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-908)

Dorman – Transmission Oil Cooler Line: Exact Fit, Metal/Rubber (Part No.624-907)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2908)