1997 Honda CR-V Lower Control Arm & Ball Joint

Your 1997 Honda CR-V might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Lower Control Arm & Ball Joint product you desperately need.

We currently carry 6 Lower Control Arm & Ball Joint products to choose from for your 1997 Honda CR-V, and our inventory prices range from as little as $54.99 up to $98.99.

On top of low prices, Advance Auto Parts offers 3 different trusted brands of Lower Control Arm & Ball Joint products for the 1997 Honda CR-V. We only sell parts from trusted brands like Driveworks so that you can find quality parts you can count on.

Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 17 reviews on our Lower Control Arm & Ball Joint products for the 1997 Honda CR-V from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Lower Control Arm & Ball Joint stock in-person!

Show More Show Less

Lower Control Arm & Ball Joint for Your 1997 Honda CR-V

Search through our amazing selection of Lower Control Arm & Ball Joint products for your 1997 Honda CR-V to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

MOOG - Control Arm and Ball Joint Assembly (Part No. RK80883)
Description
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

5.0

Read 3 review(s)

Review snapshot ® by PowerReviews

5.0

5.0

5

5

2020-01-05

5

5

i would buy this again if needed

i would buy this again if needed

Submitted 2020-01-05

By Mr. Bill

From PA

Moog products are the way to go

Bottom Line recommended

Moog products are the way to go

By Mr. Bill from PA

BOTTOM LINE recommended

5

5

2018-04-21

5

5

Woukd buy again!

Woukd buy again!

Submitted 2018-04-21

By Cesar

From undisclosed

Very sturdy and good quality!

Bottom Line NULL

Very sturdy and good quality!

By Cesar from undisclosed

BOTTOM LINE NULL

5

5

2018-03-30

5

5

Thanks advance auto parts

Thanks advance auto parts

Submitted 2018-03-30

By luis

From undisclosed

Perfect service and parts

Bottom Line NULL

Perfect service and parts

By luis from undisclosed

BOTTOM LINE NULL
from $72.99
View Product
MOOG - Control Arm and Ball Joint Assembly (Part No. RK80884)
Description
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:
EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

5.0

Read 2 review(s)

Review snapshot ® by PowerReviews

5.0

5.0

5

5

2018-04-21

5

5

Would buy again

Would buy again

Submitted 2018-04-21

By Cesar

From undisclosed

Very sturdy and good quality!

Bottom Line NULL

Very sturdy and good quality!

By Cesar from undisclosed

BOTTOM LINE NULL

5

5

2018-03-30

5

5

Good job

Good job

Submitted 2018-03-30

By luis

From undisclosed

Thanks

Bottom Line NULL

Thanks

By luis from undisclosed

BOTTOM LINE NULL
from $98.99
View Product
Driveworks - Control Arm Front Upper Right (Part No. 520-648)
Description
Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.

Product Features:
Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

4.0

Read 3 review(s)

Review snapshot ® by PowerReviews

4.0

4.0

5

5

2020-10-28

5

5

I would buy this part again

I would buy this part again

Submitted 2020-10-28

By Daniel

From Undisclosed

This arm is a nice and easy install and compared to the cost and labor of replacing the bushings (My Bushings were bad) the whole arm was less than the cost of the two bushings. But wait that's not all... it comes with the upper ball joint. So this is the economy grade and it gets you back on the road and restores the safety and integrity of the suspension. If you want the very best, and you are going to keep the car a while then spend more on the Moog brand. You should get an alignment after replacing this part. Especially if you have good tires. Make sure you know which is the left and which is the right if you are replacing both.

Bottom Line NULL

This arm is a nice and easy install and compared to the cost and labor of replacing the bushings (My Bushings were bad) the whole arm was less than the cost of the two bushings. But wait that's not all... it comes with the upper ball joint. So this is the economy grade and it gets you back on the road and restores the safety and integrity of the suspension. If you want the very best, and you are going to keep the car a while then spend more on the Moog brand. You should get an alignment after replacing this part. Especially if you have good tires. Make sure you know which is the left and which is the right if you are replacing both.

By Daniel from Undisclosed

BOTTOM LINE NULL

1

1

2018-01-16

1

1

Make noises after a few months

Make noises after a few months

Submitted 2018-01-16

By Rafa

From Hollywood Florida

After a year is making noises

Bottom Line not recommended

After a year is making noises

By Rafa from Hollywood Florida

BOTTOM LINE not recommended

5

5

2017-05-25

5

5

I would buy again.

I would buy again.

Submitted 2017-05-25

By Roberto

From undisclosed

Good parts thank you.

Bottom Line NULL

Good parts thank you.

By Roberto from undisclosed

BOTTOM LINE NULL
from $54.99
View Product
Driveworks - Control Arm Front Upper Left (Part No. 520-647)
Description
Rigorously tested by a team of product and quality engineers, our Control Arm & Ball Joint Assembly is designed for passenger safety. Our industry-leading evaluation process ensures a smooth ride.

Product Features:
Ball joints and bushings included for a complete installation, saving time and labor (where applicable)
Direct replacement for a trouble-free installation
Steel, iron or aluminum construction ensures durability
Powder-coated or painted for long-lasting rust and corrosion resistance

3.5

Read 3 review(s)

Review snapshot ® by PowerReviews

3.5

3.5

4

4

2021-04-19

4

4

Descent quality

Descent quality

Submitted 2021-04-19

By Daniel

From Undisclosed

Descent quality, better quality than Detroit Diesel parts.

Bottom Line NULL

Descent quality, better quality than Detroit Diesel parts.

By Daniel from Undisclosed

BOTTOM LINE NULL

5

5

2020-10-28

5

5

Good part, nice fit, great price.

Good part, nice fit, great price.

Submitted 2020-10-28

By Daniel

From Undisclosed

This arm is a nice and easy install and compared to the cost and labor of replacing the bushings (My Bushings were bad) the whole arm was less than the cost of the two bushings. But wait that's not all... it comes with the upper ball joint. So this is the economy grade and it gets you back on the road and restores the safety and integrity of the suspension. If you want the very best, and you are going to keep the car a while then spend more on the Moog brand. You should get an alignment after replacing this part. Especially if you have good tires. Make sure you know which is the left and which is the right if you are replacing both.

Bottom Line NULL

This arm is a nice and easy install and compared to the cost and labor of replacing the bushings (My Bushings were bad) the whole arm was less than the cost of the two bushings. But wait that's not all... it comes with the upper ball joint. So this is the economy grade and it gets you back on the road and restores the safety and integrity of the suspension. If you want the very best, and you are going to keep the car a while then spend more on the Moog brand. You should get an alignment after replacing this part. Especially if you have good tires. Make sure you know which is the left and which is the right if you are replacing both.

By Daniel from Undisclosed

BOTTOM LINE NULL

4

4

2016-11-16

4

4

Bolted right in and fit perfectly.

Bolted right in and fit perfectly.

Submitted 2016-11-16

By Mike

From Illinois

I installed a right side arm 61,000 miles ago and it is failing. Good thing it's got the lifetime warranty

Bottom Line recommended

I installed a right side arm 61,000 miles ago and it is failing. Good thing it's got the lifetime warranty

By Mike from Illinois

BOTTOM LINE recommended
from $54.99
View Product
Dorman - Suspension Control Arm (Part No. 520-647)
Description
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed - additional coatings offer long-lasting rust and corrosion resistance
from $65.99
View Product
Dorman - Suspension Control Arm (Part No. 520-648)
Description
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed - additional coatings offer long-lasting rust and corrosion resistance
from $55.99
View Product