1996 Ford F-250 Pickup Performance and Racing Products

Name: Torque Converter, Tork Master 3000
Brand: B & M
SKU: 50442
Price: 675.99 USD

Below you will find various in-demand Ford Performance and Racing Products, components and accessories for your 1996 F-250 Pickup. Advance Auto Parts has popular F-250 Pickup parts like Performance Oil Filters, Performance Exhaust Products, Performance Air Filters and more. You’ll also find aftermarket and OEM Performance and Racing Products for other F-250 Pickup model years including 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1997 and more. Select a category of 1996 Ford F-250 Pickup Performance and Racing Products below and start saving instantly.

Popular 1996 Ford F-250 Pickup Performance and Racing Products Categories

Performance Oil Filters

Performance Intake Manifolds

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Engine Cold Air Intakes

Performance Shifters

Performance Distributors

Performance Valve Covers

Performance Body Mounts

Performance Steering Stabilizers

Performance Water Outlets

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Ignition Modules

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Cover Gasket Sets

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Engine Oil Pan Gaskets

Performance Ring and Pinions

Performance Ignition Parts

Performance Sway Bar Link Kits

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Engine Main Bearing Gasket Sets

Performance Axle Pivot Bushings

Performance Engine Push Rod Guideplates

Performance Engine Push Rods

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Performance Nitrous Systems

Essential Performance and Racing Products for 1996 Ford F-250 Pickups

from

$675.99

A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Due to torque converter co

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$45.99

Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:

42000 Volts
Effective To 6500 RPM
Quicker Starting
Improved Throttle Response
Higher RPM Power
Can Finished In Yellow

from

$59.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$59.99

MSD Ignition control are easy to install, but we also offer several plug-in harnesses. These are especially handy for quick installation on late model vehicles! The harnesses plug directly into your factory coil and harness then four color coded wires plug into the corresponding wires of the MSD. Two wires go from the MSD to the battery and you’re done with no cutting or splicing!

Product Features:

Splice free installation
Plugs directly into factory coil

from

$136.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$359.99

Product Features:

Best for the Ultimate in Street High-Performance
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades

from

$499.99

Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:

Certified Billet Material
Borg and Beck Clutch Pattern
Long-Style Clutch Pattern
Ring Gear Securely Mounted To Prevent Spinning

from

$205.99

Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

Product Features:

Assures Longer Lasting Cab to Bed Alignment
Replace to Restore Ride Height
Gain Durability
Stronger Than Original Rubber Mounts

from

$31.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$34.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

from

$367.99

K&N air intake systems are engineered for increased performance, outstanding durability, and sleek aesthetics – and are available in an assortment of finishes and powder coatings. K&N’s state-of-the-art High-Flow Air Filter helps to shield your engine from contaminants, while a meticulously engineered aerodynamic tube design contributes to a guaranteed increase in horsepower and torque. K&N air intake systems are designed to improve acceleration, towing, and throttle response while providing world class protection for your engine. Our intakes are dyno-tested and provide up to 50% more airflow compared to OEM intake systems. K&N intakes are easy to install and maintain with air filter cleaning required only every 100,000 miles.

Product Features:

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$625.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$367.99

GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
IMPROVED ENGINE SOUND: Hear the power under the hood.
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
HIGH QUALITY: Made in America.

from

$49.99

Ultra-Seal intake manifold gaskets are manufactured from cellulose/nitrile composition gasket material. Provides excellent sealing and durability. Incorporates Silicone beading around each intake and water outlet port to provide additional sealing strength on both sides of each gasket. No gasket sealer required. For OE replacement, high performance street, drag race and oval track use. Includes manifold end seals.

Product Features:

Manufactured from cellulose/nitrile composition gasket material
Provides excellent sealing and durability
Silicone beading on both sides of each gasket
Complete with manifold end seals
For OE replacement, high performance street, drag race and oval track use
Creates Tight Leak proof Seal

from

$477.99

MSD Pro-Billet Distributors are the finest performance and racing distributors available. Every feature has been engineered to endure the rigors of high performance and racing engines. Whether cruising the streets or racing stock cars, dragsters, boats or trucks, MSD has a distributor for it. MSD uses state-of-the-art, Computer Numerical Controlled (CNC) mills and lathes to machine each housing. After a long series of precise cuts and movements, the billet is formed into a flawless distributor housing that is accurate to within 0.001″. The flex-free housings are lightweight, have no porosity or weak areas and look great on polished, show quality engines.

Product Features:

CNC machined billet aluminum housing and DuPont Rynite base
Supplied w/Cap-A-Dapt and rotor (accepts MSD socket style caps)
Must Be Used w/An MSD Ignition Control
Mech. advance assem. can be locked out for crank trigger systems
Nylon pads ensure smooth operation of the advance weights
Advance weight pins are staked and tig welded to the plate
Advance plate and weights are fine blanked from chrome moly steel
QPQ coated for friction reduction

from

$350.99

These Magnum Roller Rocker Arms for Ford V8 289-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8″ stud diameter and 1.6 ratio, they are designed for serious performance enthusiasts. All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift. With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don’t accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

Product Features:

Ultimate street rocker designed for serious performance enthusiasts
Constructed from 8620 chromemoly steel, a superior material that will not flex and assures maximum lift
Roller tip reduces friction while stiff design and superior ratio accuracy yields more effective valve lift
15 to 30 horsepower increase over stock rocker arms
Use in any applications with less than 350 lbs. open spring pressure

from

$527.99

The Classic BAndM Megashifter features a Ratcheting action, ensuring positive shifts. Chrome Knob, Neutral safety switch And NHRA/IHRA Approved reverse lockout. Fits Most 3 And 4 speeds.

Product Features:

Universal Floor Mount
Base Can Be Trimmed-Custom Fit
Cable Operated
Quick Installation
Accurate Shifting

from

$65.99

MSD Ignition is a company built on Customer Satisfaction and Service. That is why all of MSD products go through regimented test procedures before they are ever packaged and shipped. MSD stands behind its products for one full year after purchase

Product Features:

Rotor phasing can be adjusted.
Ideal When Atomic TBI Is Controlling The Timing

from

$68.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$48.99

This Mr. Gasket Rear Main Seal is made from silicone to allow the seal to handle extreme engine oil temperature. It also provides for an upgrade for that leaky rope style seal and is a direct replacement for a rubber main seal. It’s also injection molded for a precise fit.

Product Features:

Repairs That Leaky Rear Main Sail
Silicone Rubber to Withstand Extreme Engine Oil Temperatures
Upgrade for Rope Seal Equipped Cars or Direct Replacement for Rubber Main Seal
Injection Molded for Precise Fit

from

$67.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Meets or exceeds all original equipment specifications
Validated for fit, form, and function
Application specific design to ensure a perfect fit and correct operation for Unsurpassed quality you can trust
Engineered and manufactured specifically for the repair environment
Every part for the repair procedure is Includes in the kit unless otherwise noted

from

$28.99

Product Features:

Firm in the Center Yet Soft on the Outside
Allows Flex and Pivot When Needed

from

$22.79

Product Features:

FORD 9″ SOLID SPACER KIT

from

$112.99

This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford TFI Remote Mounted modules. 1991-95

Product Features:

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$399.99

The X4 Performance Programmer connects high-performance tunes to your vehicle for an immediate boost in horsepower and torque. Awaken your engine to its maximum real potential with preloaded, dyno-proven tune files through the easy-to-use functionality. Instantly increase horsepower and torque and customizeModify a variety of parameters at the touch of a button, all while monitoring gauges on a customizable display.

Product Features:

Read vehicle performance data on a full-color LCD display for easy viewing, day or night.
Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
Reads and clears DTC (Diagnostic Trouble Codes) with ease.
Load up to 10 custom tune files created by any SCT Custom Tuning Dealer.
Full color LCD display
High-speed data logging/monitoring
Dual analog inputs
Most popular vehicles supported
Installs quickly and easily
Easy restoration back to stock
User adjustable vehicle parameters
USB Interface cable included
Product might not be available in all states due to local laws.

from

$32.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$92.99

Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$199.99

Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Upgrade your 1996 Ford F-250 Pickup with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1996 Ford F-250 Pickup, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your F-250 Pickup functioning at its best. At Advance Auto Parts, we offer a wide selection of 153 Performance and Racing Products for the 1996 Ford F-250 Pickup, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Exhaust Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1996 Ford F-250 Pickup at great prices. Our Performance and Racing Products inventory for this model ranges from just $7.99 to $1,132.99, with an average price of $170.09. Our 153 Performance and Racing Products in stock come from 24 trusted brands, so you’re sure to find the right part for your 1996 Ford F-250 Pickup without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1996 Ford F-250 Pickup, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, FEL-PRO Performance, B & M, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. FEL-PRO Performance and B & M also bring quality to the table, with Performance and Racing Products available starting at $35.99, and at an average 4.2 stars rating. With 392 customer reviews and counting, our 1996 Ford F-250 Pickup Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1996 Ford F-250 Pickup is always ready to roll. We’re committed to providing you with everything you need to keep your F-250 Pickup in top shape, all in one place. Start shopping confidently below for your 1996 Ford F-250 Pickup!

Best-Selling Performance Oil Filters for 1996 Ford F-250 Pickups

Enhance the driving experience in your Ford with 2 quality Performance Oil Filter components, starting at $17.99.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

from

$21.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Most Popular 1996 Ford F-250 Pickup Performance Exhaust Products

Customize your Ford with 14 Performance Exhaust Products products like Performance Exhaust Mufflers and Performance Exhaust Manifold Gaskets, all priced under $243.99.

show more show less

from

$33.99

Multi-Layered Steel (MLS) exhaust gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.

Product Features:

Designed for extreme cylinder pressures by high horsepower-high compression turbocharged, supercharged and nitrous oxide injected engines
Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention
Stress formed inner and outer layer embossments act like springs that rebound under flange clamp load, creating force to seal extreme pressures
Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials
Total gasket thickness .075 inch

from

$134.99

Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a powerful rich tone and is the most aggressive, deepest sounding, highest performing four inch case street muffler we’ve ever built! Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$89.99

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Dyno proven to flow up to 700 SCFM
Dyno proven to flow up to 700 SCFM

from

$156.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$166.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:

Durable fully welded 409 stainless steel
Deep aggressive exhaust note
Noticeable interior resonance
Excellent performance on high horsepower vehicles
No internal packing to blowout

from

$164.99

This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over standard 40 series. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

from

$45.99

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$59.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
For use with SVO square port cylinder heads
Easy Removal For Disassembly

from

$39.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$243.99

The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$199.99

The Super 50 series muffler is a larger version of Flowmaster’s 50 series Delta Flow muffler. Originally designed for trucks and SUV’s, it is also well suited to muscle car and high performance applications. In addition, the larger case size significantly reduces interior resonance and provides a deep, rich tone along with mileage and power gains. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$149.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$45.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

from

$25.99

Hooker’s precision-matched Super Competition header gaskets provide a sure fit and unmatched exhaust sealing. This OEM quality gasket is constructed of a thick ,.060 inch, high temperature, non-asbestos fiber laminate with a perforated steel core, which provides a superior grip and adhesion. This construction also contributes to exact fit compliance between the cylinder head and header flange, offering excellent sealing properties during extreme temperature and operating conditions.

Product Features:

Tear Resistant
Precisely Cut To Match Header

Top Picks for 1996 Ford F-250 Pickup Performance Air Filters

Upgrade Ford F-250 Pickups with top-quality Performance Air Filters parts, including 1 OEM and aftermarket selections for your 1996 model.

show more show less

from

$68.99

K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle. K&N air filters are backed by our famous 10-Year/Million Mile Limited Warranty, and they provide an environmentally friendly way to reduce landfill waste by avoiding disposable filters. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability

In-Demand Performance Engines for 1996 Ford F-250 Pickups

Select from 53 premium Performance Engines parts for your 1996 Ford F-250 Pickup, with prices ranging from $7.99 to $1,132.99.

show more show less

from

$35.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$50.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Rigid core, molded silicone rubber gaskets provide for ease of installation, and are great for on-again/off-again situations (like setting valve lash).
Features high-tech silicone material for long life, a solid steel core for strength and durability, and stainless steel compression limiters to prevent
Not intended for use in emission controlled vehicles.

from

$30.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$249.99

The COMP Cams High Energy Die-Cast Aluminum Roller Rocker Arms are new rocker arms from the valve train leader that have been designed for street and moderate race use. They feature a die-cast body created from aluminum with a needle bearing fulcrum and roller tip. The die-cast, larger than stock body offers the strength properties and light weight of aluminum while the specially engineered fulcrum and roller tip decrease friction and lower oil temperatures, thus improving response and horsepower.

Product Features:

Cost effective aluminum construction provides superior strength to weight ratio
Needle bearing fulcrum and roller tip reduce friction and lower oil temperatures for improved response and horsepower
Durable design increases valve lift while withstanding the rigors of moderate race use
Die-formed aluminum body is larger than stock, and may require modifications to stock valve covers for clearance.

from

$34.99

Mr. Gasket Performance Valve Cover Gaskets are high-density cork/rubber blend gaskets that use evenly sized cork particles distributed evenly throughout the rubber binder. The result is a compressible valve cover gasket without leak paths. These gaskets create a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Provides excellent flange sealing and durability. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-density cork/rubber blend gasket material
Provides excellent sealing and durability
For OE replacement, high performance street, drag race and oval track use

from

$34.99

Precision die-cast, these water necks are first polished to a high luster, then chrome plated. Comes with gasket and mounting bolts.

Product Features:

Complete with gasket and mounting bolts
Chrome plated

from

$53.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
SUPERIOR SEAL – Precise embossed Printo seal sealing beads at all vital areas to eliminate leak paths
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$33.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
With steel core to provide ultimate excellent blowout resistance.
Not intended for use in emission controlled vehicles.

from

$380.99

Product Features:

High Rise/Dual Plane Design For Maximum Torque
Fully CNC Machined For A Perfect Fit
Square Bore Carburetor Flange
Exhaust Crossover For Improved Street Drivability
Permanent Mold Casting Process
Lighter/Smoother/Better Looking
More Consistent Castings

from

$49.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
Not intended for use in emission controlled vehicles.

from

$338.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$1132.99

Product Features:

For Idle to 5500 RPM Street-Driven Performance
Produced 34 ft/lbs. More Torque than Stock
Removable Plenum Cover for Runner Access
Base Manifold is CNC Matched to Upper Manifold
50 State Street Legal for 1988 to 96 5.8L Engines
Upper Manifold ; Cover Powder-Coated Titanium Gray
Accepts All Stock Hardware
Match w/Other Power Packages for More Performance

from

$823.99

Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$621.99

ENGINE ROCKER ARM

from

$582.99

ENGINE ROCKER ARM

High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Ford 240-300 6 Cylinder

from

$558.99

High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Ford 240-300 6 Cylinder

from

$529.99

ENGINE ROCKER ARM

from

$481.99

ENGINE ROCKER ARM

High Energy 212/212 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

from

$451.99

High Energy 212/212 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

High Energy 218/218 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

from

$438.99

High Energy 218/218 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

High Energy 206/206 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

from

$428.99

High Energy 206/206 Hydraulic Flat Cam for Ford 240-300 6 Cylinder

from

$387.99

Product Features:

Designed for Optimum Torque and Acceleration
Maximum Performance From Idle through Mid-Range
Matched to Edelbrock Performer Intakes
Includes Hydraulic Lifters and Assembly Lube
Major Improvement in Throttle Response and Torque
Use For Daily Drivers/Trucks/Vans/RVs/4x4s
Take The Guesswork Out Of Camshaft Selection

from

$301.99

ENGINE ROCKER ARM

from

$277.99

ENGINE ROCKER ARM

Most Sold 1996 Ford F-250 Pickup Performance Ignition Products

Explore our best-selling Ford parts for the 1996 F-250 Pickup among 11 OEM and aftermarket options starting from $33.99.

show more show less

from

$92.99

Service Part
No Moving Parts To Wear Out
Self Contained Unit
Can Drive OEM
Can Drive High Performance Ignition Coils

from

$78.99

Top off your GM ignition system with these great new replacement coils. The GM coils have MSD performance in factory style housings. MSD designed these coils by combining our blaster coil experience with e-core coil efficiency. Each coil has a unique turns ratio plus there is lower primary resistance than the stock coil. This all amounts to a bolt-in replacement coil that produces more output voltage. The coils will work with stock ignition systems as well as MSD equipped cars and trucks. Installation tip: If you plan to install an MSD ignition with your GM dual connector coil, use PN 8876 harness for a direct plug-in installation.

Product Features:

Direct performance replacement for Ford TFI coil
85:1 turns ratio
Lower Primary Resistance Produces High Voltage Output
Works w/Stock Ignition As Well As MSD Ignitions
CARB E.O. Approved

from

$104.99

This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.

Product Features:

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$112.99

This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1984 thru 1993.

Product Features:

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$112.99

Fits Most Stock And Modified Distributors
Dwell Control Circuit
Resists False Triggering

from

$59.99

Splice free installation
Plugs directly into factory coil

from

$123.99

Ditch that plain-Jane stock appearance once and for all. AVS Hood Scoops add 200HP in looks alone. Its heat-resistant, UV-protected, thermoplastic material is built to last a lifetime delivering unmistakable eye appeal wherever you go. Available in smooth black nish with paintable surface so you can match your factory paint if you like. Choose from several styles and sizes in 1- and 2-piece options. Cleanly mounts with 3M automotive-grade adhesive tape concealed. . Proudly made in the USA with global materials.

Product Features:

Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
Made In The USA With Global Materials.

from

$33.99

Product Features:

Service Part
Makes Connections Quick And Easy

from

$649.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Absolutely The Most Accurate Way To Trigger The Ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$599.99

Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered.
Powerful magnets are embedded in a billet aluminum trigger wheel.
Incl. brackets/mounting hardware to fit a variety of engines

from

$199.99

Glass Filled Polyester Case
Longer Spark Duration
Increased Performance
No Energy Loss Due To Arcing
Includes Brass Contact Terminal

Top-Rated Performance and Racing Products Brands For Your 1996 Ford F-250 Pickup

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1996 Ford F-250 Pickups. Below you’ll find some of our best rated Performance and Racing Products from K&N, FEL-PRO Performance, and B & M, and more. Performance and Racing Products from these brands that fit a 1996 F-250 Pickup start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 1996 Ford F-250 Pickup Performance and Racing Products

When it comes to maintaining or upgrading your 1996 Ford F-250 Pickup, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1996 Ford F-250 Pickup. With over 3 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $36.32. Plus, with over 117 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(99)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Great product. Great service.”

from $21.99

(6)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“Great filter for the price”

from $68.99

(12)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

“like being able to reuse over & over”

Popular FEL-PRO Performance 1996 Ford F-250 Pickup Performance and Racing Products

FEL-PRO Performance auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1996 Ford F-250 Pickup owner should feel confident when installing genuine FEL-PRO Performance parts in their vehicle. To ensure the best fit and performance for your 1996 F-250 Pickup, Advance Auto Parts carries a full inventory of 2 FEL-PRO Performance Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these FEL-PRO Performance Performance and Racing Products range from $35.99 to $50.99, plus, with more than 5 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $50.99

(1)

Engine Valve Cover Gasket Set

“good”

from $35.99

(4)

Lower Intake Manifold Gasket Set: 11 Piece Set

“Great overall intake gasket!!”

FAQs for 1996 Ford F-250 Pickup Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1996 Ford F-250 Pickups?

Out of 153 Performance and Racing Products that fit 1996 Ford F-250 Pickups, the following parts are the top sellers:

Lower Intake Manifold Gasket Set: 11 Piece Set (5991277) – $35.99
Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (18290065) – $89.99
Ignition Coil (17350180) – $78.99

What’s the price range for 1996 Ford F-250 Pickup Performance and Racing Products?

Performance and Racing Product prices for the 1996 Ford F-250 Pickup start at $7.99 and go up to $1,132.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1996 Ford F-250 Pickup?

The average price for Performance and Racing Products for the 1996 Ford F-250 Pickup is $170.09. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Ford F-250 Pickup model years?

Yes, we currently carry Performance and Racing Products for 40 model years of Ford F-250 Pickups between 1953 and 1997. Performance and Racing Products are bought most frequently for the following model years: 1997, 1995, 1994, 1993, 1992, 1991, 1990, 1989, and 1988.

What are the cheapest Performance and Racing Products for my 1996 Ford F-250 Pickup?

The cheapest 1996 Ford F-250 Pickup Performance and Racing Products we carry in stock are:

Flat 1 Piece Guide Plate for Ford 289-351W with 5/16" Pushrod and 7/16" Stud (50288902) – $7.99
Flat 1 Piece Guide Plate for Ford 289-351W with 3/8" Pushrod and 7/16" Stud (50288866) – $8.99
High Energy 10.136" Long, 5/16" Diameter Pushrod (50289703) – $8.99
D4260 Flame-Thrower Distributor Rotor HEI/EST Black (10111551) – $11.99
Pro Magnum Hydraulic Flat Lifter for Ford V8 and 231/240-300 6 Cylinder. (50286751) – $14.99

What are the top-rated Performance and Racing Products that fit the 1996 Ford F-250 Pickup?

Out of 392 reviews by customers, our 1996 Ford F-250 Pickup Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1996 Ford F-250 Pickup and their top-rated products:

Performance Steering Products
- Hyper-Flex Polyurethane Cab & Body Mount Set for Improved Ride and Alignment (22908101) – $112.99
Performance Air Filters
- Hyper-Flex Polyurethane Cab & Body Mount Set for Improved Ride and Alignment (22908101) – $112.99
Performance Oil Filters
- Hyper-Flex Polyurethane Cab & Body Mount Set for Improved Ride and Alignment (22908101) – $112.99

What types of Performance and Racing Products do you sell for my 1996 Ford F-250 Pickup?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1996 Ford F-250 Pickup:

Can I get help with 1996 Ford F-250 Pickup Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

What is your return policy for Ford F-250 Pickup Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Ford F-250 Pickup Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1996 Ford F-250 Pickup Performance and Racing Products

B & M – Torque Converter, Tork Master 3000 (Part No.50442)

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1013)

MSD Ignition – Harness; MSD 6 to Ford TFI (Part No.8874)

Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842546)

Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)

Hays – Flywheels (Part No.12-535)

Energy Suspension – Body Cab Mount Set (Part No.4.4114G)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5103R)

Mr. Gasket – Water Neck (Part No.2664)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Million Mile Air Filter (Part No.57-2543)

Competition Cams – Xtreme Energy Computer Controlled 232/240 Hydraulic Roller Cam (Part No.35-522-8)

K&N – Cold Air Intake: Adds Up To 5 Horsepower, With Million Mile Air Filter (Part No.57-2503)

Mr. Gasket – Ultra Seal: Intake Gasket (Part No.5838)

MSD Ignition – Distributor; Ford V8; 302 (Part No.8582)

Competition Cams – Magnum Roller 1.6 Ratio Rocker Arm Set (Part No.1431-16)

B & M – Automatic Shifter – Megashifter – Universal (Part No.80690)

MSD Ignition – Rotor Assembly; Chevy V8 Cap-A-Dapt (Part No.8421)

Energy Suspension – Leaf Spring Bushing Set (Part No.4.2114R)

Mr. Gasket – Rear Main Seal Gasket (Part No.1963)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1683)

Energy Suspension – Axle Pivot Bushing Set (Part No.4.3121R)

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4105)

Accel – Ford Tfi Mdltr Rmte Mnt W/Grse (Part No.35371)

SCT Performance – Preloaded Performance Programmer for Increased Horsepower & Torque (Part No.7015)

Energy Suspension – Sway Bar Bushing Set (Part No.4.5119R)

Mallory – Unilite Ignition Module (Part No.605)

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-6001)

Mr. Gasket – Mls Exhaust Gasket (Part No.4825G)

Flowmaster Inc. – Super 44 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942446)

Dynomax – Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (Part No.17674)

Dynomax – Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17228)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.852546)

Flowmaster Inc. – Delta 40 Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842541)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1467)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5959)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1416)

Flowmaster Inc. – 70 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, 22in long, Non-Reversible, Mild Sound (Part No.52571)

Flowmaster Inc. – 50 Series Muffler, 2.25in Offset Inlet 2.25in Center Outlet, Non-Reversible, Moderate Sound (Part No.52456)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.952546)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1468)

Hooker Headers – Super Competition Header Gasket (Part No.10882HKR)

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.33-2023)

FEL-PRO Performance – Lower Intake Manifold Gasket Set: 11 Piece Set (Part No.1250)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1684)

Edelbrock – Intake Manifold Gasket for 1963-1996 Small-Block Fords (Part No.7220)

Competition Cams – ROCKER ARMS, DIE CAST ALUM SMALL BLOCK FORD 1.6 1 ST (Part No.17043-16)

Mr. Gasket – Valve Cover Gasket Set (Part No.276)

Mr. Gasket – Water Neck (Part No.2664)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1018)

FEL-PRO Performance – Performance Oil Pan Gasket Set (Part No.1820)

Weiand – Stealth; Intake Manifold (Part No.8023)

FEL-PRO Performance – Performance Main Seal Set (Part No.2948)

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Edelbrock – Performer Truck 5.8L Intake Manifold Small-Block Ford (Part No.3881)

B & M – Holeshot 2400 (Part No.40412)

Competition Cams – ENGINE ROCKER ARM (Part No.19049-16)

Competition Cams – ENGINE ROCKER ARM (Part No.19048-16)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit Ford 240-300 6 Cylinder (Part No.CL66-236-4)

Competition Cams – ENGINE ROCKER ARM (Part No.1630-16)

Competition Cams – ENGINE ROCKER ARM (Part No.19044-16)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam for Ford 240-300 6 Cylinder (Part No.66-237-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam for Ford 240-300 6 Cylinder (Part No.66-248-4)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam for Ford 240-300 6 Cylinder (Part No.66-236-4)

Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.2167)

Competition Cams – ENGINE ROCKER ARM (Part No.17045-16)

Competition Cams – ENGINE ROCKER ARM (Part No.17044-16)

Mallory – Unilite Ignition Module (Part No.605)

MSD Ignition – Ignition Coil (Part No.8227)

Accel – Ford Tfi Modulator 1983-96 (Part No.35368)

Accel – Ford Tfi Mdltr 84-93 W/Grease (Part No.35369)

Accel – Ford Tfi Mdltr Rmte Mnt W/Grse (Part No.35371)

MSD Ignition – Harness; MSD 6 to Ford TFI (Part No.8874)

Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)

Mallory – Distributor Wiring Harness (Part No.29349)

MSD Ignition – Crank Trigger Kit; Small Block Ford (Part No.8640)

MSD Ignition – Crank Trigger Kit; Big Block Ford (Part No.8644)