1994 Plymouth Grand Voyager Oxygen Sensor

Oxygen Sensor for Your 1994 Plymouth Grand Voyager

Search through our amazing selection of Oxygen Sensor products for your 1994 Plymouth Grand Voyager to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  NTK - Switching Oxygen Sensor: 4 Wire, 23.25" Long, Heated, Direct Fit (Part No. 23023)

  Description

  NTK is the world's largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle's on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
  
  Product Features:

  • OEM QUALITY: NTK is the world's largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
  • PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
  • OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
  • EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
  • EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
  • ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
  • NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2020-10-07

    5

    5

    Perfect for 92 Jeep YJ 2.4L

    Perfect for 92 Jeep YJ 2.4L

    Submitted 2020-10-07

    By Tazz

    From Magnolia, TX

    30 minute install and after starting the engine with the new NTK O2 sensor I immediately noticed there is a much smoother idle and even sounded a little quieter. Performance while driving improved and I expect to get better MPG's too. Comes complete with square connector for the OEM Jeep YJ harness. Threads are pre-coated with anti-seize compound.

    Bottom Line recommended

    30 minute install and after starting the engine with the new NTK O2 sensor I immediately noticed there is a much smoother idle and even sounded a little quieter. Performance while driving improved and I expect to get better MPG's too. Comes complete with square connector for the OEM Jeep YJ harness. Threads are pre-coated with anti-seize compound.

    By Tazz from Magnolia, TX

    BOTTOM LINE recommended

  • 1

    1

    2020-02-19

    1

    1

    Does not work correctly for 1995 jeep

    Does not work correctly for 1995 jeep

    Submitted 2020-02-19

    By KC9000

    From Modesto, ca

    Smog with this o2 sensor failed, switched to the Denso and it passed. The Smog expert I had to involve in my recent smog said the Denso has more air holes in the sensor cover making it read better, the NTK one has one line of holes around the sensor making it not get a good reading, or being lazy o2 sensors.

    Bottom Line not recommended

    Smog with this o2 sensor failed, switched to the Denso and it passed. The Smog expert I had to involve in my recent smog said the Denso has more air holes in the sensor cover making it read better, the NTK one has one line of holes around the sensor making it not get a good reading, or being lazy o2 sensors.

    By KC9000 from Modesto, ca

    BOTTOM LINE not recommended

  • 5

    5

    2018-06-26

    5

    5

    Would buy again

    Would buy again

    Submitted 2018-06-26

    By Faron

    From undisclosed

    Item as described

    Bottom Line NULL

    Item as described

    By Faron from undisclosed

    BOTTOM LINE NULL

  from $57.99

  View Product
• 

  Bosch - Oxygen Sensor: 4 Wire, 24.02" Long, Heated, Universal (Part No. 15729)

  Description

  Bosch is the world's leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.  Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product. 
  
  Product Features:

  • Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
  • Includes Smart Link Connector, no soldering required
  • No special tools required for installation
  • Seared protection tube due to 100% functional quality test
  • Performance meets or exceeds OE specifications

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 1

    1

    2020-08-20

    1

    1

    Not user friendly

    Not user friendly

    Submitted 2020-08-20

    By Mike from AL

    From AL

    Instructions were very confusing. You must re-use your old sensor's connector and splice it onto the new sensor using the connector included with new sensor. It was a pain to wire. I don't trust the connection will hold up. I wish I would have bought one already assembled. I guess I need to read the details next time. I didn't realize they sold garbage like this until I got it home, so that's why I didn't know you had to splice the old connector to the new sensor. There is no way I would buy this again.

    Bottom Line not recommended

    Instructions were very confusing. You must re-use your old sensor's connector and splice it onto the new sensor using the connector included with new sensor. It was a pain to wire. I don't trust the connection will hold up. I wish I would have bought one already assembled. I guess I need to read the details next time. I didn't realize they sold garbage like this until I got it home, so that's why I didn't know you had to splice the old connector to the new sensor. There is no way I would buy this again.

    By Mike from AL from AL

    BOTTOM LINE not recommended

  • 5

    5

    2019-10-03

    5

    5

    Advance is my "Go To store"!

    Advance is my "Go To store"!

    Submitted 2019-10-03

    By Daniel

    From Undisclosed

    Worked right out of the box. Wiring was a snap since it allowed a way to take care of the burnt connectors>

    Bottom Line NULL

    Worked right out of the box. Wiring was a snap since it allowed a way to take care of the burnt connectors>

    By Daniel from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2017-12-24

    5

    5

    I would buy this item again

    I would buy this item again

    Submitted 2017-12-24

    By john

    From undisclosed

    Work great

    Bottom Line NULL

    Work great

    By john from undisclosed

    BOTTOM LINE NULL

  from $67.99

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Direct Fit, Heated, Wire Length: 11.81 (Part No. 234-4004)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2022-02-10

    5

    5

    exact fit

    exact fit

    Submitted 2022-02-10

    By wanderer

    From Maryland

    Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector

    Bottom Line recommended

    Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector

    By wanderer from Maryland

    BOTTOM LINE recommended

  • 5

    5

    2022-01-18

    5

    5

    I would buy this product again.

    I would buy this product again.

    Submitted 2022-01-18

    By Hay you

    From Nabob,WI

    Direct fit, but connector tang was in wrong place, so I just cut it out.

    Bottom Line NULL

    Direct fit, but connector tang was in wrong place, so I just cut it out.

    By Hay you from Nabob,WI

    BOTTOM LINE NULL

  • 5

    5

    2021-08-11

    5

    5

    I would use it again

    I would use it again

    Submitted 2021-08-11

    By Shawn

    From Undisclosed

    It fit the hole and did it's job

    Bottom Line NULL

    It fit the hole and did it's job

    By Shawn from Undisclosed

    BOTTOM LINE NULL

  from $54.99

  View Product
• 

  DENSO - First Time Fit Oxygen Sensor (Part No. C5010117030ND)

  Description

  Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
  
  Product Features:

  • SUPERIOR DESIGN - Maximizes engine performance and fuel efficiency while reducing harmful emissions.
  • DOUBLE-PROTECTION COVER - Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
  • ALUMINUM-OXIDE TRAP LAYER - Keeps silicone and lead outside the ceramic element through DENSO's exclusive design, preventing damage to the platinum electrode.
  • STAINLESS STEEL HOUSING - Resists corrosion and contamination with a rugged, watertight body.
  • POROUS PTFE FILTER - Allows atmospheric oxygen to enter the sensor without permitting water or engine contaminants to seep into the casing. Denso First Time Fit oxygen sensors are coated with a special formulation of aluminum oxide to trap impurities outside of the ceramic element. In head-to-head testing against the leading competitors, DENSO oxygen sensors were rated two times more resistant to silicone and lead poisoning. Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install. Recommended Installation Tool - 234-0100, O2 Sensor Socket Set

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2022-02-10

    5

    5

    exact fit

    exact fit

    Submitted 2022-02-10

    By wanderer

    From Maryland

    Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector

    Bottom Line recommended

    Be careful when ordering, there were three different sensors listed with the only notable difference being the electrical connector

    By wanderer from Maryland

    BOTTOM LINE recommended

  • 5

    5

    2022-01-18

    5

    5

    I would buy this product again.

    I would buy this product again.

    Submitted 2022-01-18

    By Hay you

    From Nabob,WI

    Direct fit, but connector tang was in wrong place, so I just cut it out.

    Bottom Line NULL

    Direct fit, but connector tang was in wrong place, so I just cut it out.

    By Hay you from Nabob,WI

    BOTTOM LINE NULL

  • 5

    5

    2021-08-11

    5

    5

    I would use it again

    I would use it again

    Submitted 2021-08-11

    By Shawn

    From Undisclosed

    It fit the hole and did it's job

    Bottom Line NULL

    It fit the hole and did it's job

    By Shawn from Undisclosed

    BOTTOM LINE NULL

  from $66.67

  View Product
• 

  DENSO - Oxygen Sensor 4 Wire, Universal, Heated, Wire Length: 11.77 (Part No. 234-4210)

  Description

  DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled performance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO's exclusive aluminum oxide trap
  
  Product Features:

  • Specifically designed to meet the increasing demands of today's engines
  • 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
  • Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
  • Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle's fuel efficiency
  • Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination

  2.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  2.5

  2.5

  • 1

    1

    2021-10-24

    1

    1

    This is NOT exact fit!!

    This is NOT exact fit!!

    Submitted 2021-10-24

    By LM

    From Charlotte, NC

    This discription for this sensor is not correct. It don't come with a wire connector so if you buy it, you'll need to buy a separate connector or find a way to modify an old one that you have to fit it.

    Bottom Line not recommended

    This discription for this sensor is not correct. It don't come with a wire connector so if you buy it, you'll need to buy a separate connector or find a way to modify an old one that you have to fit it.

    By LM from Charlotte, NC

    BOTTOM LINE not recommended

  • 2

    2

    2021-10-24

    2

    2

    This is NOT exact fit!!

    This is NOT exact fit!!

    Submitted 2021-10-24

    By LM

    From Charlotte, NC

    The description is not correct for this item. The sensor don't come with a connector so it cant be installed without buying a separate connector or modifying an old one that you have to fit it.

    Bottom Line not recommended

    The description is not correct for this item. The sensor don't come with a connector so it cant be installed without buying a separate connector or modifying an old one that you have to fit it.

    By LM from Charlotte, NC

    BOTTOM LINE not recommended

  • 4

    4

    2018-03-28

    4

    4

    No connector

    No connector

    Submitted 2018-03-28

    By Slaffka

    From Minnesota

    The senor comes with no plastic connectors, just the pins at the end. I have heard about a good quality of the brand, but this is not exact fit (without modifications). I have returned mine.

    Bottom Line NULL

    The senor comes with no plastic connectors, just the pins at the end. I have heard about a good quality of the brand, but this is not exact fit (without modifications). I have returned mine.

    By Slaffka from Minnesota

    BOTTOM LINE NULL

  from $69.99

  View Product
• 

  NTK - NTK Oxygen Sensor (Part No. C501065300NTK)

  Description

  NTK is the world's largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
  
  Product Features:

  • OE-Equivalent.
  • Direct fit for easy installation.
  • Extensively Tested During Manufacture to Guarantee Quality and Reliability
  • Supplied With a Factory-Fitted OEM Connector for Easy Installation
  • Precision manufactured with a sensing element incorporating NTK's premier technical ceramics Installation Notes: Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering and if the connector does not match, do not install.

  from $77.08

  View Product
• 

  Bosch - Universal Oxygen Sensor (Part No. C5010100329BOS)

  Description

  The Bosch universal oxygen sensor utilizes a mix of zirconium and yttrium oxides and other elements to form a tough base that withstands the intense stress to which oxygen sensors are subjected. Each element is incredibly strong for best-in-class performance and maximum service life. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance.
  
  Product Features:

  • OE-Equivalent.
  • Direct fit for easy installation.
  • OE Style connectors and wire lengths.
  • Base ceramic probe of Zirconium and Yttrium.
  • Patented Platinum Power Grid.
  • Fine particle filter. Critical Installation Notes: Please read the installation directions included in the box before removal of the original oxygen sensor form the vehicle. - Vehicles equipped with Air Fuel Ratio Sensors may look very similar to the Oxygen Sensor. Please confirm the correct part before ordering. Installation Instructions: Universal Oxygen Sensors require assembly of electrical connectors and cannot be returned once wire end connectors have been crimped...

  from $72.54

  View Product