from

$25.99

FLYWHEEL SHIM

from

$25.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$13.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$50.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$50.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$67.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$47.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Design improvements include extended life and quiet operation
Industry leading coverage
Professional technicians know they can depend on National

from

$181.99

New Perfection Clutch Sets include the following: New OEM-style cover assembly, computer-tested for clamp load, plate lift, and finger height; new OEM-style clutch disc with facings built to exceed OEM specifications; new clutch release bearing meeting or exceeding OEM specifications (where supplied); new pilot bearing/bushing (where used); alignment tool for the perfect clutch installation (where available); hydraulic line disconnect tool (where used).

Product Features:

New clutch disc with non-asbestos facings built to exceed OEM specifications for durability, safety, and positive engagement.
Cover assembly is computer tested for clamp load, plate lift and finger height to ensure uniform and smooth operation
Alignment tool included where available to ensure professional installation
Where required, includes new pilot bearing or bushing to complete the job

from

$332.99

LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:

Application matched for OE form, fit, and function
Manufactured with high-quality materials, using cutting edge technology and processes
Stock photo – Actual parts and materials may vary.

from

$86.99

This clutch hydraulic line is designed to match the fit and function of the original line on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this clutch hydraulic line is designed to match the fit and function of the original line on specified vehicles
Restores functionality – reliable replacement for a line that has failed due to fatigue or collision damage
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$52.14

The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium Original Equipment replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$37.99

Designed and engineered for faster installation than original equipment using existing lines and no special tools. OEM plastic cylinders can be prone to cracking/breakage. TECHnovation Clutch Hydraulics aluminum castings are made from solid blocks that are bored and honed for accurate tolerances and maximum durability.

Product Features:

Engineered and supported in the U.S.A. by our tech support team of experts in clutch system function
Each unit includes vehicle-specific bulletins for accurate installation
Online videos show step-by-step installation and bleeding procedures
Includes pressure control valves, check valves, and fittings for ease of installation, bleeding, and maintaining OE performance levels

from

$38.99

LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.

from

$7.99

AT CLUTCH PLATE

from

$32.99

The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Manufactured to meet or exceed original equipment specs
Eliminates grinding from damaged teeth
Increases starter drive life

from

$41.83

Clutch Lever

from

$13.87

Flywheel Bolt

from

$184.99

AT FLEX PLATE

from

$234.16

Sachs Flywheels are made from high quality steel forging and are designed to meet or exceed the manufacturers specifications for quality and performance.

Product Features:

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$167.99

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$233.99

Flywheel hot spots can cause chatter. Resurfacing a flywheel doesn’t always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.

Product Features:

Casting process closely monitored to ensure uniform density and balance retention
Eliminates chance of chatter due to hot spots not always removed by resurfacing
New ring gear ensures positive starter engagement
Engineered to properly fit the intended application with no modifications

from

$203.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$208.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$117.99

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$252.46

LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.

Product Features:

OE quality and direct fit application
Made from high quality steel
Designed to reduce clutch chatter and vibration
Dynamically balanced

from

$182.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.

from

$80.99

Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:

Balanced to factory specs
Fit and function like the original parts
Restores normal operation

from

$195.99

LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.