1991 Oldsmobile Cutlass Supreme Performance and Racing Products
Find Your Specific 1991 Oldsmobile Cutlass Supreme Performance and Racing Products
Below you will find various in-demand Oldsmobile Performance and Racing Products, components and accessories for your 1991 Cutlass Supreme. Advance Auto Parts has popular Cutlass Supreme parts like Performance Steering Products, Performance Ignition Products, Performance Brakes and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Cutlass Supreme model years including
1988,
1989,
1990,
1992,
1993,
1994,
1995,
1996,
1997 and more. Select a category of 1991 Oldsmobile Cutlass Supreme Performance and Racing Products below and start saving instantly.
Popular 1991 Oldsmobile Cutlass Supreme Performance and Racing Products Categories
Essential Performance and Racing Products for 1991 Oldsmobile Cutlass Supremes
Competition Cams – Magnum 7.800" Long, .080" Wall, 3/8" Diameter Pushrod Set (Part No.7513-16)
from
$165.99
Magnum Pushrods from COMP Cams offer an affordable solution for your .080″ wall chromemoly pushrod needs. Designed to withstand the stresses of a high performance engine, Magnum Pushrods are head-treated for extended durability and have precision formed, reinforced ends. Magnum Pushrods are black-oxide finished with their part number and length laser etched onto the surface for easy identification.
Product Features:
See More
Product Features:
- 3/8″ Diameter, 7.800″ Length
- Magnum Pushrods for Small Block Chevy
- One-piece .080″ wall chromemoly steel tubing
- Heat-treated for extended durability and guide plate compatibility
- Precision formed and reinforced pushrod end
Edelbrock – Pushrod Set for S/B Chevy (Part No.9630)
from
$199.99Product Features:
- Case-Hardened Tubing
- Welded Ends
- 5/16 in. Diameter
- Use with or without Hardened Steel Guideplates
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9721)
from
$100.99
Valve spring retainers for use OE cast iron heads. Superior quality heat-treated steel. Machined for strength with black oxide finish. Finish ensures rust and corrosion protection.
Product Features:
See More
Product Features:
- Valve Spring Retainers for Use OE Cast Iron Heads
- Superior Quality Heat-Treated Steel
- Machined for Strength with Black Oxide Finish
- Finish Ensures Rust and Corrosion Protection
Edelbrock – Performer Series Retainer (Qty 16) (Part No.9724)
from
$106.99
Product Features:
See More
- Use W/ Valve Springs Part #5822, 5882, 5896, 5872, 5867, 5812, 5857
- Set of 16
- 1.50 in. Outside Diameter
- Steel Material
- Black Oxide Finish
B & M – Holeshot 2400 (Part No.70419)
from
$670.99
HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) Application: HoleShot 2400 for GM 1993 to 1996 TH700R4 (30 spline) and 1984 to 1993 4L60E (30 spline) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- New Turbine Hub
- New Springs/Rollers In Stator
B & M – Holeshot 3600 (Part No.20425)
from
$949.99
HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: HoleShot 3600 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated. Furnace brazed impeller. New precision steel alloy pump drive tube. New heavy duty needle bearing between stator and impeller (not a thrust washer). Needle bearing between stator and turbine. Furnace brazed turbine. Dual pattern drive lugs on some GM Holeshots. New turbine hub. New springs and rollers in stator.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
- Dual Pattern Drive Lugs
- New Turbine Hub
- New Springs/Rollers In Stator
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Distributor Wiring Harness (Part No.29349)
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$46.99
Brake Bleeder Screws
Competition Cams – Thumpr 226/241 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-600-5)
from
$471.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Xtreme Energy 240/246 Hydraulic Flat Cam and Lifter Kit (Part No.CL42-225-4)
from
$416.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam and Lifter Kit (Part No.CL12-601-8)
from
$1152.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – Ultra-Gold ARC Rocker Set w/ 1.6 Ratio for Chevrolet Small Block w/ 3/8" Stud (Part No.19002-16)
from
$433.99
These COMP Cams Ultra-Gold Aluminum Roller Rocker Arms with a 3/8″ stud diameter and 1.6 ratio are designed for Chevrolet V8 265-400 applications. The new modern design features of these Ultra-Gold Rockers are proven to withstand extremely aggressive spring pressure and valve lift. Designed specifically for high performance street and race engines, the Ultra-Gold Aluminum Rocker Arms are precision CNC-machined to strict tolerances. Developed to meet the demands of professional engine builders, these rockers include features never before possible in an aluminum rocker arm.
Product Features:
See More
Product Features:
- CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
- Designed for high performance street and race engines
- Precision-sorted trunion bearings withstand elevated valve spring pressure and valve lift
- Additional clearance, up to 1.650″ O.D. valve spring
Competition Cams – Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud (Part No.1605-16)
from
$476.99
Ultra Pro Magnum Rocker Arm Set with 1.6 Ratio for Chevrolet SBC with 7/16" Stud
Competition Cams – ALUMINUM GOLD ROCKER ARMS, SBC 1 ST (Part No.19001-16)
from
$433.99
The original Ultra-Gold Aluminum Rockers changed the way racing and high performance street engine builders approached valve train design. Now, COMP Cams is revolutionizing valve train performance again with the next generation of Ultra-Gold ARC Series Al
Product Features:
See More
Product Features:
- Precision-sorted trunnion bearings withstand valve spring pressure up to 700 lbs.
- CNC-machined, lightweight design removes weight and yields unrivaled quality and ratio accuracy
- Increase engine power, enhance valve train stability and improve oiling
- Designed for high performance street and race engines
- Arced channel & contoured top give the rockers the best strength to weight ratio possible
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2006)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Edelbrock – Sure Seat Valve Springs for S/B Chevy O.E Cast iron Cylinder Heads (Part No.5703)
from
$69.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Sure Seat Valve Springs for Chevy 262-400 V8 1957-95 (Part No.5802)
from
$64.99
Springs made of highest quality spring wire. Springs precision wound to close tolerances. Non-Rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- For Use With Cast Iron Heads
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Use with Original Equipment Heads Only
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5794)
from
$159.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Non-Rotator Style: Dyno Tested and Street Proven
- Great Match to Edelbrock Camshaft Kit
Edelbrock – Complete Sure Seat Valve Spring Kit for Chevy 262-400 V8 1957-95 (Part No.5894)
from
$155.99
Complete kit includes retainers and locks. Springs made of highest quality spring wire. Springs precision wound to close tolerances. Includes superior quality steel retainers. Includes 7 degree heat-treated valve stem locks. Retainers and locks are black oxide coated. Non-rotator style: Dyno tested and street proven. Great match to Edelbrock camshaft kit.
Product Features:
See More
Product Features:
- Complete Kit: Includes Retainers And Locks
- Springs Made of Highest Quality Spring Wire
- Springs Precision Wound To Close Tolerances
- Includes Superior Quality Steel Retainers
- Includes 7 deg. Heat-Treated Valve Stem Locks
- Retainers and Locks Black Oxide Coated
- Dyno Tested And Street Proven
- Great Match to Edelbrock Camshaft Kit
Accel – Super Stock Coil Chrome (Part No.8140C)
from
$51.99
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary
Product Features:
See More
Product Features:
- Chrome Plated
- 42000 Volts
- Effective To 6500 RPM
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$83.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Accel – Supercoil (Part No.140001)
from
$114.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Accel – GM Hei Supercoil Red/White (Part No.140005)
from
$123.99
Engineered for higher energy output resulting in quicker starting, improved idle quality, crisper throttle response and more high RPM power. Compatible with both original HEI ignition systems and later model computer controlled HEI systems. No need to remove or re-time distributor. Complete with simplified ground strap, mounting screws, silicone coil gasket and carbon contact brush / spring.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Similar to Standard Motor Products SMP Dr-32
- Long Life And Great Looks
Upgrade your 1991 Oldsmobile Cutlass Supreme with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 1991 Oldsmobile Cutlass Supreme, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Oldsmobile or enhancing its overall performance, Performance and Racing Products are key to keeping your Cutlass Supreme functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Performance and Racing Products for the 1991 Oldsmobile Cutlass Supreme, designed to meet your needs without breaking the bank.
From
Performance Steering Product
replacements to
Performance Ignition Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1991 Oldsmobile Cutlass Supreme at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $899.99, with
an average price of $212.86.
Our 30 Performance and Racing Products in stock come from 7 trusted brands, so you’re sure to find the right part for your 1991 Oldsmobile Cutlass Supreme without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1991 Oldsmobile Cutlass Supreme, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Energy Suspension, MSD Ignition, and more.
K&N Performance and Racing Products
start at just $17.99 and boast an impressive 4.8 stars average rating from customers.
Energy Suspension and MSD Ignition also bring quality to the table, with Performance and Racing Products available starting at $9.99, and at an average 4.4 stars rating.
With 269 customer reviews and counting, our 1991 Oldsmobile Cutlass Supreme Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1991 Oldsmobile Cutlass Supreme is always ready to roll. We’re committed to providing you with everything you need to keep your Cutlass Supreme in top shape, all in one place.
Start shopping confidently below for your 1991 Oldsmobile Cutlass Supreme!
Best-Selling Performance Steering Products for 1991 Oldsmobile Cutlass Supremes
Enhance the driving experience in your Oldsmobile with 2 quality Performance Steering Product components, starting at $9.99.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Most Popular 1991 Oldsmobile Cutlass Supreme Performance Ignition Products
Customize your Oldsmobile with 3 Performance Ignition Products products
like Performance Coils and
Performance Ignition Parts, all
priced under $199.99.
MSD Ignition – Coil; GM Coil Pack; 2 Tower Style (Part No.8224)
from
$83.99
The updated Fuel Pump Booster is an easy way to maintain the proper fuel pressure on your car after adding a power adder such as a turbo or supercharger. The new model allows you to make your boost adjustments through a PC for improved control and accuracy. The Booster ensures that the engine receives the fuel it needs to make up for the increase in air being pumped into the intake manifold. It will increase the voltage to the factory fuel pump in proportion to manifold boost pressure in order to maintain the proper fuel delivery. The amount of increase is adjustable from a range of an additional 1.5 -22 volts up to 30 psi which can all be set and adjusted from your PC with MSD’s easy to use Windows based software. The MSD Booster will wire to the factory fuel pump relay or with a secondary booster pump.
Product Features:
See More
Product Features:
- Direct performance replacement
- For GM 2 Tower Coils Used From Mid 1980s To Late 1990s
- 80:1 turns ratio
- Lower Primary Resistance Produces High Voltage Output
- Works w/Stock Ignition As Well As MSD Ignitions
- CARB E.O. Approved
Mallory – Unilite Ignition Module (Part No.605)
from
$92.99
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.
Product Features:
See More
Product Features:
- Service Part
- No Moving Parts To Wear Out
- Self Contained Unit
- Can Drive OEM
- Can Drive High Performance Ignition Coils
Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)
from
$199.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).
Product Features:
See More
Product Features:
- Glass Filled Polyester Case
- Longer Spark Duration
- Increased Performance
- No Energy Loss Due To Arcing
- Includes Brass Contact Terminal
Top Picks for 1991 Oldsmobile Cutlass Supreme Performance Brakes
Upgrade Oldsmobile Cutlass Supremes with top-quality Performance Brakes parts, including 1 OEM and aftermarket selections for your 1991 model.
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$46.99
Brake Bleeder Screws
In-Demand Performance Engines for 1991 Oldsmobile Cutlass Supremes
Select from 22 premium Performance Engines parts for your 1991 Oldsmobile Cutlass Supreme, with prices ranging from $8.99 to $899.99.
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$899.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$749.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Competition Cams – High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6 (Part No.K16-233-4)
from
$746.99
High Energy 212/212 Hydraulic Flat Cam K-Kit for Chevrolet 173-207/2.8-3.4L V6
Competition Cams – 7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-100)
from
$636.99
7 Degree Steel Retainer Set of 100 for Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6 (Part No.CL16-233-4)
from
$531.99
High Energy 212/212 Hydraulic Flat Cam/Lifter Kit Chevrolet 173-207/2.8-3.4L V6
Competition Cams – High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L (Part No.CL16-115-4)
from
$531.99
High Energy 192/200 Hydraulic Flat Cam and Lifter Kit Chevrolet 173-207/2.8-3.4L
Competition Cams – ENGINE ROCKER ARM (Part No.1605-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1413-12)
from
$206.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1216-12)
from
$132.99
ENGINE ROCKER ARM
Competition Cams – Engine Valve Spring Kit (Part No.980-12)
from
$57.99
Engine Valve Spring Kit
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1604-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12 (Part No.7816-12)
from
$45.99
High Energy 6.165" Long, 5/16" Diameter Pushrod Set of 12
Competition Cams – ENGINE ROCKER ARM (Part No.1413-1)
from
$31.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1216-1)
from
$19.29
ENGINE ROCKER ARM
Competition Cams – 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (Part No.742-1)
from
$10.99
7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring
Competition Cams – Engine Valve Spring (Part No.980-1)
from
$9.99
Engine Valve Spring
Competition Cams – High Energy 6.165" Long, 5/16" Diameter Pushrod (Part No.7816-1)
from
$8.99
High Energy 6.165" Long, 5/16" Diameter Pushrod
Most Sold 1991 Oldsmobile Cutlass Supreme Performance Oil Filters
Explore our best-selling Oldsmobile parts for the 1991 Cutlass Supreme among 2 OEM and aftermarket options starting from $17.99.
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2001)
from
$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
Product Features:
See More
Product Features:
- HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
- VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
- PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
- EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
- EASY TO REMOVE: Fast and easy Wrench-Off removal
- HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
- HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
Top-Rated Performance and Racing Products Brands For Your 1991 Oldsmobile Cutlass Supreme
Shop for the best-rated brands offering Performance and Racing Products and other products for your 1991 Oldsmobile Cutlass Supremes. Below you’ll find some of our best rated Performance and Racing Products from K&N, Energy Suspension, and MSD Ignition, and more. Performance and Racing Products from these brands that fit a 1991 Cutlass Supreme start at just $9.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 1991 Oldsmobile Cutlass Supreme Performance and Racing Products
When it comes to maintaining or upgrading your 1991 Oldsmobile Cutlass Supreme, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 1991 Oldsmobile Cutlass Supreme. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99. Plus, with over 76 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$17.99
(29)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“It’s easy to put on and take off.”
from
$17.99
(47)
Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine
“Good filter that I use regularly”
Popular Energy Suspension 1991 Oldsmobile Cutlass Supreme Performance and Racing Products
Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1991 Oldsmobile Cutlass Supreme owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1991 Cutlass Supreme, Advance Auto Parts carries a full inventory of 1 Energy Suspension Performance and Racing Products. Plus you will be keeping your Oldsmobile in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range up to $9.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$9.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”
FAQs for 1991 Oldsmobile Cutlass Supreme Performance and Racing Products
Which Performance and Racing Products are best-sellers for 1991 Oldsmobile Cutlass Supremes?
Out of 30 Performance and Racing Products that fit 1991 Oldsmobile Cutlass Supremes, the following parts are the top sellers:
- Coil; GM Coil Pack; 2 Tower Style (22360191) – $83.99
- Tie Rod Dust Boot (22906874) – $9.99
- Unilite Ignition Module (17350025) – $92.99
What’s the price range for 1991 Oldsmobile Cutlass Supreme Performance and Racing Products?
Performance and Racing Product prices for the 1991 Oldsmobile Cutlass Supreme start at $8.99 and go up to $899.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 1991 Oldsmobile Cutlass Supreme?
The average price for Performance and Racing Products for the 1991 Oldsmobile Cutlass Supreme is $212.86. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Oldsmobile Cutlass Supreme model years?
What are the cheapest Performance and Racing Products for my 1991 Oldsmobile Cutlass Supreme?
The cheapest 1991 Oldsmobile Cutlass Supreme Performance and Racing Products we carry in stock are:
- High Energy 6.165" Long, 5/16" Diameter Pushrod (50289328) – $8.99
- Tie Rod Dust Boot (17360821) – $9.99
- Tie Rod Dust Boot (22906874) – $9.99
- Engine Valve Spring (50286657) – $9.99
- 7 Steel Retainer for SBC, Chevrolet/Buick V6 with 1.250" OD Spring (50289502) – $10.99
What are the top-rated Performance and Racing Products that fit the 1991 Oldsmobile Cutlass Supreme?
Out of 269 reviews by customers, our 1991 Oldsmobile Cutlass Supreme Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1991 Oldsmobile Cutlass Supreme and their top-rated products:
- Performance Steering Products
- Tie Rod Dust Boot (17360821) – $9.99
- Performance Ignition Products
- Tie Rod Dust Boot (17360821) – $9.99
- Performance Oil Filters
- Tie Rod Dust Boot (17360821) – $9.99
What types of Performance and Racing Products do you sell for my 1991 Oldsmobile Cutlass Supreme?
As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1991 Oldsmobile Cutlass Supreme:
Can I get help with 1991 Oldsmobile Cutlass Supreme Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Oldsmobile Performance and Racing Products and more.
What is your return policy for Oldsmobile Cutlass Supreme Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Oldsmobile Cutlass Supreme Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
