1990 Chrysler New Yorker Suspension Parts

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

• The highest quality replacement strut mount available
• Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
• Superior rubber reduces noise, vibration and harshness
• Mount bearings provide smoother steering and help retain front end alignment
• Matched grade studs and nuts

Complete Strut Assem

Complete Strut Assem

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

• Designed to meet or exceeds OE performance specifications
• Durable neoprene rubber

Driveworks Shock Mount, Suspension Strut Bellows

Product Features:

• Designed to meet or exceeds OE performance specifications
• Durable neoprene rubber

KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:

• Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
• Poly Foam Bumper Prevents The Strut From Bottoming Out
• Built With Design And Quality That Matches Or Exceeds One
• Protects The Upper Seal And Bushing

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

• REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
• PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
• KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
• ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
• PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
• EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
• BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

• HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
• PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
• OE-STYLE DESIGN — Engineered to match or exceed OE requirements
• RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
• Metal rib design helps lock the inner tube within frame pocket
• Metal surfaces are phosphate coated for corrosion protection

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

• Maintains Better Alignment While Driving
• Full Floating and Non Binding
• Fits Into the Remaining Stock Control Arms

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Torsional rubber bushings
• UV resistant
• No Squeak

Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:

• KYB Recommended Orem Replacement Shock For Classic, Domestic Cars
• The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Classic Chrysler
• The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
• Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
• KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
• Specially formulated hydraulic fluid with multi-range viscosity for any weather climate

The KYB Excel-G OE-equivalent direct fit shock absorber is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Restores a vehicle’s originally designed handling and control

Product Features:

• Direct fit application for ease of installation
• Calibrated to compensate for worn suspensions
• Components and valving are designed specifically for each application
• The best choice to restore OE performance and normal driving conditions
• Built with quality that matches or exceeds OE
• Coverage for domestic and import cars, trucks, vans, minivans, and SUVs

Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:

• Available for import and domestic passenger cars
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Designed To Provide Inflation Control Of Your Air Helper Springs
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:

• Controls Two Air Springs Simultaneously
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:

• The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
• The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
• Easy Installation

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Nuts and Bolt: SAE Standard Grade
• Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
• Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
• Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
• Outer Tube: Long-lasting corrosion and rust protection.
• Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
• Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
• Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
• Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
• Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets (where applicable)
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Complete Strut Assem

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

• Pre-assembled with all new strut, bearing plate, coil spring, dust cover and spring seat (where applicable)
• Struts feature application-specific technology with exact strut valving and tuning for smoother, safer and more stable ride
• Springs are built with U.S. grade steel and designed to match factory ride height and performance
• OE quality strut mount, bearing plate and brackets (where applicable)
• Complete strut assembly is extensively tested for functionality and durability
• Built with a micro-smooth, chrome-plated piston rod

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.