1989 Porsche 928 Brake Rotors and Drums
More 1989 Porsche 928 Brake Rotors and Drums
Find your specific 1989 Porsche 928 original or aftermarket Brake Rotors and Drums below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Porsche 928 Brake Rotors and Drums
Sebro – Coated Brake Rotor (Part No.N1000931087SEB)
from
$122.68
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Zimmermann X-Drill Coated – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000945829ZXC)
from
$154.49
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000945829ZIC)
from
$105.89
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Sebro – Brake Disc (Part No.N1000127726SEB)
from
$216.84
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Zimmermann Coated – Brake Disc (Part No.N10001863165ZXC)
from
$205.82
Brake Disc
Sebro – Coated Brake Rotor (Part No.N10001453810SEB)
from
$157.18
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100023063ZIC)
from
$150.97
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Sebro – Coated Brake Rotor (Part No.N1000127727SEB)
from
$218.74
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Zimmermann Coated – Brake Disc (Part No.N10001453810ZXC)
from
$209.59
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N1000948858ZIC)
from
$150.85
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Popular 1989 Porsche 928 Brake Rotors and Drums Categories
1989 Porsche 928 Brake Rotors and Drums
Maybe you’re in the middle of a full rebuild of that 1989 Porsche 928. Maybe you just need a couple of Brake Rotors and Drums. Either way, Advance Auto Parts has 6 different Brake Rotors and Drums in our inventory ranging from $122.68 to $209.59. That means you can find the exact parts or products you need to keep that 1989 Porsche 928 running smoothly.
Brake Rotors and Drums are only as good as their brand. We stock 2 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Porsche 928. Zimmerman and Sebro are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Brake Rotors and Drums for your 1989 Porsche 928, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Brake Rotors and Drums to keep your 1989 Porsche 928 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Brake Rotors and Drums Brands To Make Your 1989 Porsche 928 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Porsche 928 demands trusted brand parts and products to keep it running. Many trusted brands of Brake Rotors and Drums make up Advance Auto Parts’ inventory, and all are ready to help make your 928 the best it can be. Be sure to browse some of our top Brake Rotors and Drums brands and parts.
FAQs for 1989 Porsche 928 Brake Rotors and Drums
What are the most purchased Brake Rotors and Drums for the 1989 Porsche 928?
Out of 6 Brake Rotors and Drums for the 1989 Porsche 928, the most popular in our inventory are:
