1988 Ford E-250 Econoline Camshafts
More 1988 Ford E-250 Econoline Camshafts
Find your specific 1988 Ford E-250 Econoline original or aftermarket Camshafts below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Ford E-250 Econoline Camshafts
Motorcraft – Original Equipment (O.E.) Sensor Assembly (Part No.DU-70)
from
$39.99
The only parts recommended by Ford Motor Company for Ford, Lincoln, and Mercury vehicles.
Product Features:
See More
Product Features:
- Inputs from the camshaft, throttle position and crankshaft sensors provide the Powertrain Control Module (PCM) the information needed to make the vehicle perform efficiently.
- The Throttle Position Sensor measures how much throttle is being applied; then the PCM tells the fuel injection system how much fuel is needed.
- The Camshaft and Crankshaft Position Sensors provide data to the PCM which controls the spark timing and ignition advance resulting in optimum performance and controlled emissions.
- Motorcraft Position Sensors meet Ford specifications to help ensure optimum performance and durability.
- Designed for long service life under harsh under-hood conditions.
- Position sensors work in harmony with other emission sensors to help provide the best possible fuel economy and emissions.
- Designed with OE electrical connectors ensuring proper fits.
Carquest – Distributor Ignition Pickup (Part No.ME58)
from
$53.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High temperature enameled wires were specified for better insulation and performance
- With industry leading expertise in electronic ignition, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
DENSO – Camshaft Position Sensor (Part No.196-6012)
from
$36.99
DENSO’s camshaft position sensors are manufactured to the stricktest OE standards resulting in unsurpassed reliability durability and detection accuracy. DENSO’s camshaft position sensors offer leading edge sensing technlogy which helps control ignition timing more precisely.
Product Features:
See More
Product Features:
- OE technology adapted for the aftermarket
- Reduces emissions, increased performance
- Delivers the highest reliability and detection accuracy
Delphi – Engine Camshaft Position Sensor (Part No.SS10058)
from
$31.99
Designed digital output for maximum signal to noise ratio. Not impacted by temperature changes and provide robust, long-lasting sensor protection. Manufactured to meet or exceed OE requirements.
Product Features:
See More
Product Features:
- Delphi products are manufactured in a Delphi ISO certified facility
- Designed digital output for maximum signal to noise ratio
- All parts used in the manufacture process are Delphi validated
- Not impacted by temperature changes and provide robust, long-lasting sensor protection
Carquest – Engine Camshaft Position Sensor (Part No.22C1003)
from
$62.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- 100% testing to meet OE performance
- High temperature resistance for longer life
Edelbrock – Performer-Plus Camshaft Kit for Big-Block Ford 429/460 V8 (Part No.7167)
from
$423.99Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Includes Hydraulic Lifters and Assembly Lube
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)
from
$321.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Performer-Plus camshaft for Ford 351M-400 V-8 (Part No.2172)
from
$345.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Dorman – Steel Cup Expansion Plug 2-1/16 In., SC, Height 0.270 (sold by each) (Part No.555-073)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 1-45/64 In. SC, Height 0.270 (sold by each) (Part No.555-033)
from
$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each) (Part No.555-055)
from
$2.29
Our Engine Camshaft Plugs are available in multiple styles, including Cup Type, Pilot Seal, Reverse Taper, Concave, and Quick-Seal® Rubber. Our unique Seal Expansion Plug ensures a leak-proof fit.
Product Features:
See More
Product Features:
- Many sizes available
- Conveniently available in packs of different quantities
- Constructed from high quality steel, copper, brass, or rubber
- Dorman’s Engine Camshaft Plugs are constructed to strict engineering quality standards
Dorman – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.555-068.1)
from
$2.49
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Competition Cams – Thumpr 227/241 Hydraulic Roller Cam for Ford 351C, 351M-400M (Part No.32-600-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 351W V8 (Part No.2281)
from
$520.99
Product Features:
See More
- Roller Cam Type
- Roller Lifter Type
- Exhaust 238 deg/Intake 238 deg Duration @ .050 Lift
- Exhaust 0.364in./Intake 0.364in. Valve Lift
- 112 deg Lobe Steps
Edelbrock – Rollin’ Thunder Camshaft for Small-Block Ford 289-302 V8 (Part No.2221)
from
$492.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam for Ford 351C, 351M-400M (Part No.32-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for Ford 5.0L V8 (Part No.3722)
from
$508.99
Product Features:
See More
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Sealed Power – Engine Camshaft Bearing Set (Part No.1403M)
from
$39.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1450M)
from
$41.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1204M)
from
$43.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1781M)
from
$39.49
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1467M)
from
$62.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1414M)
from
$52.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Sealed Power – Engine Camshaft Bearing Set (Part No.1886M)
from
$52.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Popular 1988 Ford E-250 Econoline Camshafts Categories
1988 Ford E-250 Econoline Camshafts
Maybe you’re in the middle of a full rebuild of that 1988 Ford E-250 Econoline. Maybe you just need a couple of Camshafts. Either way, Advance Auto Parts has 14 different Camshafts in our inventory ranging from $2.29 to $520.99. That means you can find the exact parts or products you need to keep that 1988 Ford E-250 Econoline running smoothly.
Camshafts are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Ford E-250 Econoline. Sealed Power, Dorman, and Carquest are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Camshafts for your 1988 Ford E-250 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Camshafts to keep your 1988 Ford E-250 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Camshafts Brands To Make Your 1988 Ford E-250 Econoline Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Ford E-250 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Camshafts make up Advance Auto Parts’ inventory, and all are ready to help make your E-250 Econoline the best it can be. Be sure to browse some of our top Camshafts brands and parts.
FAQs for 1988 Ford E-250 Econoline Camshafts
What are the most purchased Camshafts for the 1988 Ford E-250 Econoline?
Out of 14 Camshafts for the 1988 Ford E-250 Econoline, the most popular in our inventory are:
from
$2.29
This product is not rated
Steel Cup Expansion Plug 2-1/2 In., Height 0.280 (sold by each)
Camshaft Plugs
