1984 Ford Thunderbird Harmonic Balancer

Harmonic Balancer for Your 1984 Ford Thunderbird

Search through our amazing selection of Harmonic Balancer products for your 1984 Ford Thunderbird to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  Power Bond Balancers - Harmonic Balancer (Part No. PB1084ST)

  Description

  PowerBond by DAYCO Street Performance Balancers are designed with a unique combination of material and castings providing the maximum strength and durability of bonded dampening rubber. Street Performance Balancer brings bonded balancer technology within the budget of every performance street engine builder. Each balancer is dynamically balanced for a smooth operation and contains easy to read computer etched timing marks.
  
  Product Features:

  • Perfect for race classes with limited specifications such as late model stock requiring an OEM style balancer
  • Dynamically balanced for a smooth operation
  • High strength SG (Spheroidal Graphite) iron rings and hubs
  • Easy to read computer etched timing marks

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 3

    3

    2021-12-24

    3

    3

    I would not buy it again. better go with oem

    I would not buy it again. better go with oem

    Submitted 2021-12-24

    By CC R-Line

    From Bayonne NJ

    these don't last long, less than three 5000 miles and two of them are sending bad code on my cc 2.0t.

    Bottom Line not recommended

    these don't last long, less than three 5000 miles and two of them are sending bad code on my cc 2.0t.

    By CC R-Line from Bayonne NJ

    BOTTOM LINE not recommended

  • 5

    5

    2021-07-16

    5

    5

    Great product!

    Great product!

    Submitted 2021-07-16

    By Meng

    From Undisclosed

    Works great on my 2008 Passat 2.0 T at 125000 miles. Replaced all four original NGK fire plugs (long overdue to be replaced) and also replaced one damaged ignition coil (supposedly damaged due to too much stress from old plugs) using a Bosch ignition coil. Miss firing problem solved at once and car runs smoothly again!

    Bottom Line NULL

    Works great on my 2008 Passat 2.0 T at 125000 miles. Replaced all four original NGK fire plugs (long overdue to be replaced) and also replaced one damaged ignition coil (supposedly damaged due to too much stress from old plugs) using a Bosch ignition coil. Miss firing problem solved at once and car runs smoothly again!

    By Meng from Undisclosed

    BOTTOM LINE NULL

  • 4

    4

    2021-06-12

    4

    4

    I would buy this product again.

    I would buy this product again.

    Submitted 2021-06-12

    By Mala

    From Undisclosed

    Product is great and a good price.

    Bottom Line NULL

    Product is great and a good price.

    By Mala from Undisclosed

    BOTTOM LINE NULL

  from $132.99

  View Product
• 

  Dorman - OE Solutions - Harmonic Balancer Assembly (Part No. 594-024)

  Description

  This direct replacement harmonic balancer features a stress-resistant rubber bond to properly absorb engine vibration. Ductile steel construction provides excellent tensile and impact strength for greater durability.
  
  Product Features:

  • Ideal replacement - this harmonic balancer assembly exactly matches the fit and function of the original harmonic balancer for a direct replacement
  • Durable construction - this harmonic balancer features a rubber vibration damper bonded between ductile steel components
  • Cost-effective solution - this balancer assembly offers original equipment quality at a competitive price
  • Quality tested - this harmonic balancer has undergone dimensional verification, material validation and functional testing to ensure performance

  3.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  3.5

  3.5

  • 5

    5

    2020-12-14

    5

    5

    Replacement

    Replacement

    Submitted 2020-12-14

    By Enrique

    From Undisclosed

    Replacement item satisfactory

    Bottom Line NULL

    Replacement item satisfactory

    By Enrique from Undisclosed

    BOTTOM LINE NULL

  • 3

    3

    2020-01-21

    3

    3

    Good performance. Poor markings

    Good performance. Poor markings

    Submitted 2020-01-21

    By Sprokitt

    From Space Coast, FL

    I bought this balancer as part of an engine rebuild. The balancer fits and works fine, but the timing marks are extremely poor. As a result it was very difficult to set and time the engine properly.

    Bottom Line not recommended

    I bought this balancer as part of an engine rebuild. The balancer fits and works fine, but the timing marks are extremely poor. As a result it was very difficult to set and time the engine properly.

    By Sprokitt from Space Coast, FL

    BOTTOM LINE not recommended

  • 5

    5

    2019-02-20

    5

    5

    Yes

    Yes

    Submitted 2019-02-20

    By Jason

    From Undisclosed

    Fit good

    Bottom Line NULL

    Fit good

    By Jason from Undisclosed

    BOTTOM LINE NULL

  from $103.99

  View Product
• 

  Dorman - OE Solutions - Harmonic Balancer Assembly (Part No. 594-024R)

  Description

  Our Harmonic Balancers feature a stress-resistant rubber bond that withstands the damaging effects of heat, salt, ozone and general wear and tear. The material allows for tensile and impact strength.
  
  Product Features:

  • Direct replacement to ensure proper fit
  • Benchmarked against OE performance to meet strict quality standards
  • Dimensional verification, material validation, and functional testing performed
  • Ease of installation with Dorman's Harmonic Balancer Puller (594-999)

  1.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2017-09-15

    1

    1

    DON'T WASTE YOUR MONEY!

    DON'T WASTE YOUR MONEY!

    Submitted 2017-09-15

    By WATERMAN

    From FLORIDA

    HAVING HAD THIS BALANCER ON MY MUSTANG FOR 4 YEARS. I LIVE IN FLORIDA . THE NUMBERS AND THE SURFACE RUSTED TO THE POINT THAT THEY WERE NOT READABLE ANYMORE. AND YEAS THE WHOLE SURFACE OF THE BALANCER RUSTED. HAVING SAID THAT, THE BALANCE WORKS FINE. HOWEVER, YOU CANNOT TIME THE ENGINE PROPERLY. ONLY 1 YEAR WARRANTY HAD TO BUY ANOTHER ONE.

    Bottom Line not recommended

    HAVING HAD THIS BALANCER ON MY MUSTANG FOR 4 YEARS. I LIVE IN FLORIDA . THE NUMBERS AND THE SURFACE RUSTED TO THE POINT THAT THEY WERE NOT READABLE ANYMORE. AND YEAS THE WHOLE SURFACE OF THE BALANCER RUSTED. HAVING SAID THAT, THE BALANCE WORKS FINE. HOWEVER, YOU CANNOT TIME THE ENGINE PROPERLY. ONLY 1 YEAR WARRANTY HAD TO BUY ANOTHER ONE.

    By WATERMAN from FLORIDA

    BOTTOM LINE not recommended

  from $213.99

  View Product
• 

  Power Bond Balancers - Harmonic Balancer (Part No. PB1084N)

  Description

  Powerbond Premium OEM Replacement Balancers are manufactured using premium ductile iron castings and injection bonded dampening rubber. Unlike typical original equipment balancers that are made with press inserted dampening rubber, the bonded dampening rubber in the Powerbond Premium OEM Replacement Balancer provides superior bonding strength between the inner and outer balancer rings that minimizes spinning and dislocation in high torque and serpentine belt appplications. With a unique combination of high strength castings, bonded dampening rubber, and dynamic balance, the Powerbond Premium OEM Replacement Balancer is the ultimate standard replacement balancer.
  
  Product Features:

  • Designed as a premium OE replacement
  • Dynamically balanced for smooth operation
  • Strong Iron casting for maximum strength
  • OEM equivalent bonded rubber

  from $63.99

  View Product
• 

  Power Bond Balancers - Harmonic Balancer (Part No. PB1084SS)

  Description

  PowerBond by DAYCO Race Performance Balancers are designed with a unique combination of material and castings providing the maximum strength and durability of bonded dampening rubber. Each balancer is dynamically balanced for a smooth operation and contains easy to read computer etched timing marks
  
  Product Features:

  • Designed especially for high revving and high horsepower street and race applications
  • Easy to read computer etched timing marks
  • CNC machined AISI 1045 forged steel hub bonded to an equally strong steel inertia ring
  • Steel inertia ring protects against forward and backward movement

  from $215.99

  View Product