1983 Chevrolet C30 Brake Master Cylinder

Brake Master Cylinder for Your 1983 Chevrolet C30

Search through our amazing selection of Brake Master Cylinder products for your 1983 Chevrolet C30 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  Wearever - Master Cylinder (Part No. 10-1982)

  Description

  Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
  
  Product Features:

  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2020-03-02

    5

    5

    I recommend and would buy again

    I recommend and would buy again

    Submitted 2020-03-02

    By John

    From Undisclosed

    This is a quality product at a reasonable price.

    Bottom Line NULL

    This is a quality product at a reasonable price.

    By John from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2019-02-27

    5

    5

    Definitely

    Definitely

    Submitted 2019-02-27

    By Shawn

    From Undisclosed

    Works great

    Bottom Line NULL

    Works great

    By Shawn from Undisclosed

    BOTTOM LINE NULL

  • 5

    5

    2018-02-18

    5

    5

    awesome

    awesome

    Submitted 2018-02-18

    By Rodney

    From undisclosed

    GOOD product

    Bottom Line NULL

    GOOD product

    By Rodney from undisclosed

    BOTTOM LINE NULL

  from $28.99

  View Product
• 

  Carquest Wearever - Master Cylinder - New (Part No. MCA98953)

  Description

  Assemblies match what was originally installed on the car from OE for quality, fit, function and material.
  
  Product Features:

  • Rubber components independently tested and certified by approved labs globally to meet extreme (hi and low) temperatures.
  • Master cylinders use correct EPDM rubber for DOT3, 4 and 5 brake fluids
  • All aluminum castings are "hard anodized"
  • All iron castings are coated to prevent rust
  • Manufacturers all major components in house.
  • Most brake masters ship with OE size/shape reservoirs, floats, switches, sensors and valves to match original OE assembly.
  • All machining done by computer programed CNC machines.
  • Castings go through 2 inspection processes (via micrometer and via go-no go fixture check) before being sent to the assembly department insuring all machining is correct and matches the OE.
  • Before assembly all castings and components are cleaned by automated ultrasonic cleaning machines
  • Assembly is done in clean room insuring no contamination is introduced into final assembly.
  • All assemblies are dated coded for 100% accurate trace-ability.
  • Every assembly is pressure tested before being shipped insuring dependable operation and leak-free performance

  1.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  1.0

  1.0

  • 1

    1

    2013-05-11

    1

    1

    Know your part

    Know your part

    Submitted 2013-05-11

    By Master Cylinder Mix Up

    From Memphis , Tn

    I have a 1985 chevy k30,6.2 Diesel, 4X4. I needed a master cylinder. When I typed my vehicle information into the computer two master cylinders came up showing to be exact fits. One Part # 1354-1584 stamped 1605 and the other part # 13-1982 stamped 1925. I contacted the online Advance Auto employee and asked them the difference between the two. I was iformed that they both should work they are showing exact fits. Ok so I purchased the one stamped 1605 because it has a larger resevior. I odered it, when it came I bench bleed it and put it on. It didnt work. When I took it off I noticed that the master cylinder end where the hydraulic push rod is inserted is alot deeper than the master cylinder stamped 1925. I believe the difference between the two are this, the master cylinder part 13-1584 stamped 1605 might be to a vacuum power booster and part 13-1982 stamped 1925 is to a hydraulic booster. If you look at the pictures of both master cylinders you can see the difference between the two ends. I hope this helps.

    Bottom Line not recommended

    I have a 1985 chevy k30,6.2 Diesel, 4X4. I needed a master cylinder. When I typed my vehicle information into the computer two master cylinders came up showing to be exact fits. One Part # 1354-1584 stamped 1605 and the other part # 13-1982 stamped 1925. I contacted the online Advance Auto employee and asked them the difference between the two. I was iformed that they both should work they are showing exact fits. Ok so I purchased the one stamped 1605 because it has a larger resevior. I odered it, when it came I bench bleed it and put it on. It didnt work. When I took it off I noticed that the master cylinder end where the hydraulic push rod is inserted is alot deeper than the master cylinder stamped 1925. I believe the difference between the two are this, the master cylinder part 13-1584 stamped 1605 might be to a vacuum power booster and part 13-1982 stamped 1925 is to a hydraulic booster. If you look at the pictures of both master cylinders you can see the difference between the two ends. I hope this helps.

    By Master Cylinder Mix Up from Memphis , Tn

    BOTTOM LINE not recommended

  from $51.99

  View Product
• 

  Carquest Wearever - Master Cylinder - New (Part No. MCA39435)

  Description

  Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability
  
  Product Features:

  • All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
  • Key components like spring are from high and stable quality suppliers.
  • Products are machined by CNC machines with strictly quality control.
  • Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards, meets S.A.E. specifications
  • Each product is 100% tested on production lines and sampling tested prior to shipment
  • Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.022 mm
  • Main cylinder hole of measured by the 0.018 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

  from $55.99

  View Product
• 

  Wearever - Master Cylinder (Part No. 10-1584)

  Description

  Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate
  
  Product Features:

  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.

  from $21.99

  View Product