1981 GMC K2500 Drive Shafts and Axles

More 1981 GMC K2500 Drive Shafts and Axles

Find your specific 1981 GMC K2500 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1981 GMC K2500 Drive Shafts and Axles

Yukon Gear – AxleHubBolt (Part No.33583)

AxleHubBolt

from

$5.99
AxleHubBolt
View Product

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2002
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.1811 INCH / 30 MM
  • CENTERLINE: 3.50 INCH / 89 MM
  • MOUNT WIDTH: 1.50 INCH / 38 MM
  • COMPLETE MOUNT
See More
View Product

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More
View Product

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint
View Product

Spicer – Universal Joint (Part No.5-153X)

Universal Joint

from

$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

(12 reviews)
View Product

Yukon Gear – 1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS (’88-Newer) See Notes (Part No.21590)

1541H Alloy Front Left Hand Short Side Stub Axle For GM 9.25" IFS ('88-Newer) See Notes

from

$279.99
Yukon front lefft hand short side stub axle for GM 9.25″ IFS (’88 and newer). Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits 1988 and up GM 9.25″ IFS
  • Left hand side
  • 33 spline
See More
View Product

Yukon Gear – 4340 Chrome Moly Outer Stub For GM Truck & Blazer And Jeep Wagoneer With Disc, Uses 5-760X U/Joint (Part No.21355)

4340 Chrome Moly Outer Stub For GM Truck & Blazer And Jeep Wagoneer With Disc, Uses 5-760X U/Joint

from

$249.99
4340 Chrome Moly outer stub for GM truck & Blazer and Jeep Wagoneer with disc breakes. 19 spline, 9.94″. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits Dana Spicer 44 in GM truck and Blazer and Jeep Wagoneer with disc brakes
  • 4340 Chromoly
  • Outer stub
  • 19 spline
  • 9.94″ from end of splines to center of u-joint bore
See More
View Product

National – Bearings (Part No.307-FFL5)

Bearings

from

$77.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

National – Bearings (Part No.N-1211-L)

Bearings

from

$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal (Part No.41150)

Adapter Sleeve Fro GM 8.6" & 9.5" Yokes To Use Triple Lip Pinion Seal

from

$24.99
Product Features:
  • Fits GM 8.6″ and 9.5″
  • Sleeve to adapt standard yoke to use late model triple lip pinion seal
See More
View Product

Dorman – Driveshaft Slip Yoke (Part No.697-560)

Driveshaft Slip Yoke

from

$185.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles
  • Effective fix – replacement restores safe, smooth driveline operation
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More
View Product

Yukon Gear – Stub Axle Bearing For GM 8.25" IFS (Part No.18059)

Stub Axle Bearing For GM 8.25" IFS

from

$57.99
Product Features:
  • Stub axle bearing
  • Fits GM 8.25″ IFS
See More
View Product

Driveworks – Wheel Bearing (Part No.S-RP-1561-GM)

Wheel Bearing

from

$30.99
Product Features:
  • Brand may vary by location
See More
View Product

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

(11 reviews)
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(3 reviews)
View Product

ACDelco – Axle Seal (Part No.K4021429877ACD)

Axle Seal

from

$18.41
Axle Seal
View Product

Yukon Gear – Full-Floating Axle Seal For GM 14T (Part No.30018)

Full-Floating Axle Seal For GM 14T

from

$13.99
Full-floating axle seal for GM 14T.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits GM 10.5″ 14 bolt truck
See More
View Product

Yukon Gear – GM 9.25 IFS Side Seal, 1998 & Up (Part No.30161)

GM 9.25 IFS Side Seal, 1998 & Up

from

$24.99
GM 9.25 IFS side seal, 1998 & up.Yukon Mighty seal.

Product Features:
  • Stub axle seal
  • Fits 1998 and up GM 9.25″ IFS
  • 2.40″ O.D.
See More
View Product

Dorman – Rear Drive Shaft: Greaseable (Part No.976-835)

Rear Drive Shaft: Greaseable

from

$658.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9360)

Front Drive Shaft: Not Greasable, Direct Replacement

from

$514.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More
View Product

Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9339)

Front Drive Shaft: Not Greasable, Direct Replacement

from

$438.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

(1 reviews)
View Product

National – Multi Purpose Seal (Part No.4638N)

Multi Purpose Seal

from

$4.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More
View Product

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88508-A)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(17 reviews)
View Product

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

Ball Bearing

from

$19.99
Value-priced bearing meets all cataloged application requirements.
See More

(5 reviews)
View Product

Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

Drive Shaft Center Support

from

$42.99
Product Features:
  • Brand may vary by location
See More
View Product

National – Multi Purpose Bearing (Part No.HB-88107-A)

Multi Purpose Bearing

from

$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(25 reviews)
View Product

1981 GMC K2500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1981 GMC K2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 38 different Drive Shafts and Axles in our inventory ranging from $4.49 to $883.99. That means you can find the exact parts or products you need to keep that 1981 GMC K2500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1981 GMC K2500. Spicer, Felpro, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1981 GMC K2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 363 reviews in this category, some of the top rated parts include Axle Shaft Lock Assortment with 4.3 stars and Center Support Bearing Motor Mount: Center, 1 Piece with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1981 GMC K2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1981 GMC K2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1981 GMC K2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your K2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1981 GMC K2500, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints

Top 1981 GMC K2500 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1981 GMC K2500. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $14.99
(20)
Multi Purpose Seal
Axle Shaft Seals
Wheel Bearing: Direct Fit, 1 Piece
from $52.99
(20)
Wheel Bearing: Direct Fit, 1 Piece
Axle Shaft Bearings

FAQs for 1981 GMC K2500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1981 GMC K2500?

Out of 38 Drive Shafts and Axles for the 1981 GMC K2500, the most popular in our inventory are:
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Bearings
from $14.79
(3)
Bearings
Drive Shaft Bearings

What are the top-rated 1981 GMC K2500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1981 GMC K2500 based on customer reviews/ratings are:
Axle Shaft Lock Assortment
from $6.49
(3)
Axle Shaft Lock Assortment
“Lucky for me they had it in stock. Parts man was excellent”
Center Support Bearing Motor Mount: Center, 1 Piece
from $34.49
(1)
Center Support Bearing Motor Mount: Center, 1 Piece
“to high”
Front Drive Shaft: Not Greasable, Direct Replacement
from $438.99
(1)
Front Drive Shaft: Not Greasable, Direct Replacement
“Purchased this driveshaft to replace stock one that was worn out. Took out of box to find that the u-joint to connect to the front axle is WRONG! The ”

More Popular Parts for All Makes