1980 AMC Pacer Car Parts & Accessories

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Atlas Lift Supports are engineered to meet or exceed OE specifications to ensure your replacement will perform the same or better than your original lift supports. Atlas Lift supports are designed to prevent premature failures, with premium features such as a corrosion-resistant exterior, OE grade end connectors, and Dynamic Dampening Technology. Dynamic Dampening Technology (DDT) is a precision groove engineered into the tube of the lift support, which allows the hatch to open at the optimum speed to prevent “bouncing” or “Jumping” at the end of the stroke. Lift Supports’ performance and longevity are affected by consistent usage, temperature changes, contact with weather elements, pulling or hanging on the part, and can cause unsafe conditions if not changed when signs of failure are present. Atlas Lift Supports are easy to replace and can be changed in minutes No Special Tools Required. Atlas Lift Supports also provide easy to read install for a quick and easy installation. Make sure to Always Replace in Pairs!

Product Features:

• Engineered to meet or exceed OE specifications- Always replace in Pairs, where applicable
• Easy Install – Less than 15 Minutes! based on average install time across all parts
• No Special Tools Required
• Certified Quality – IATF 16949 Certified- exceeds quality control standards and testing performance
• OE-Grade end connectors manufactured from high-strength materials to ensure proper fit and function
• OE-Performance Proprietary DYNAMIC DAMPENING TECHNOLOGY (DDT) provides a smooth open and close, where applicable
• World-class polished nitride-coated steel shafts provide corrosion resistance, smooth operation, and long life for the gas-seal
• Trilingual Install Instructions provided inside each package

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Burco Redi Cuts mirror replacements provide a solution when just the mirror glass is broken. Our mirror replacements are an economical and quality alternative to high-priced OEM mirror assemblies. Burco offers an industry leading 4,700+ Redi Cuts mirror replacements covering 10,000 vehicles and counting. b+savvy and replace that broken side mirror!

Product Features:

• Made in USA
• Exact Fit
• Safety Smooth Edges
• Replaces OE Mirror
• Premium Mirror Glass
• Break-Free Guarantee
• Instructions Included

Worn or broken window crank handle leading to difficult window operation? Made of durable material for reliable performance, this window crank handle replaces the original equipment handle.

Product Features:

• Ideal replacement – this window crank handle matches the fit and function of the original equipment component
• Durable construction – this window crank handle is made of durable material to withstand extended use
• Easy to install – this window crank requires no special tools to install
• Versatile design – this window crank handle is suitable for use in various locations in the vehicle

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

• High torque and rigidity
• Sensor-safe, non-corrosive formula
• OEM specified
• Low-odor, non-corrosive formula
• Ideal for closed spaced bolt patterns

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 10″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Crowned raceways and rollers to ensure even load distribution for maximum life
• Industry leading coverage
• Professional technicians know they can depend on National

Value-priced bearing meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

• Imperial Maxi-Cool® plate and fin transmission cooler
• Size: 3/4″ x 11″ x 7-1/2″
• Mid-size and full-size cars, pickups
• GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

AT SOLENOID SEAL

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 6″
• Sub-compact to compact cars
• GVWR up to 18,000 lbs.
• Compatible with OEM cooler systems

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 15-7/8″
• Compact and mid-size cars
• GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

Product Features:

• Imperial Econo-Kool« tube and fin transmission cooler
• Size: 3/4″ x 5″ x 12-1/2″
• Sub-compact to compact cars
• GVWR up to 12,000 lbs.
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Unsurpassed quality you can trust
• Validated for fit, form and function
• Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Product Features:

• Imperial Rapid-Cool« plate and fin transmission cooler
• Size: 3/4″ x 11″ x 9-1/2″
• Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
• GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
• 33% more efficient than a comparable tube and fin design

Product Features:

• Mid-size and full-size cars, pickups
• GVWR up to 18,000 lbs.; towing up to 3,500 lbs
• Compatible with OEM cooler systems
• Ultrasonically soldered for reliability
• 100% pressure testing to 150 PSI for quality assurance
• High efficiency turbulators

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 15-7/8″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

Value-priced seal meets all cataloged application requirements.

Product Features:

• Brand may vary by location

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

• Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
• Sensor-safe, non-corrosive, RTV silicone
• Protects against leaks caused by vibration and thermal expansion
• Meets performance specs of OE silicone gaskets
• Quickly returns vehicle to service in just 90 minutes

Product Features:

• Imperial high-performance transmission cooler
• Size: 3/4″ x 7-1/2″ x 12-1/2″
• SAE 45-degree fittings for maximum reliability
• Electrostatic powder-coated to prevent corrosion
• SAE 45 degree fittings for maximum reliability
• Electrostatically powder coated to prevent corrosion
• All aluminum lightweight construction

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

AT SEL SHAFT SEAL

AT SHF LINK BUSHING

Product Features:

• ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.

Product Features:

• Include steels, frictions, gaskets, and filter
• Includes Band and Modulator (if applicable)

Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:

• Balanced to factory specs
• Fit and function like the original parts
• Restores normal operation

The ring gear has teeth which engage with the starter motor allowing the engine to crank over And start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit And function just like the original part to ensure durability And long life.

Product Features:

• Manufactured to meet or exceed original equipment specs
• Eliminates grinding from damaged teeth
• Increases starter drive life

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Design improvements include extended life and quiet operation
• Industry leading coverage
• Professional technicians know they can depend on National

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

• Premium bearing design matches OEM specifications
• Precision manufactured using premium-grade steel for outstanding durability and performance
• Design improvements include extended life and quiet operation
• Industry leading coverage
• Professional technicians know they can depend on National

FLYWHEEL SHIM

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

Circulation Tank Heater is Available in 850W, 1000W, 1500W, and 2000W, 120V and 240V. This heater is thermostatically controlled 135 degrees-175 degrees. Moderate mechanical ability is required for installation. Uses versatile strap type mounting.

Product Features:

• Available for all size engines
• Equipped with check valve
• Fits most liquid cooled engines
• Installations easier and simpler
• New lower radiator hose connectors

Lower Radiator Hose Heater

Freeze Plug Heater, also referred to as a block heater or frost plug heater is the most reliable and efficient way to pre-heat your engine. Operates by being directly submerged into coolant and heating the block. Requires mechanical ability to install.

Product Features:

• Saves wear and tear on your engine
• Simple installation directly into engine block

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

AVS continues its high-quality automotive accessories with the AVS Windflector. Add the AVS Windflector to your vehicle today and get back the fresh air, warm sun and driving enjoyment you’ve been missing. This wind deflector adds a sturdy shield to the leading edge of your sunroof or moonroof in just minutes. Once installed, AVS Windflector deflects wind and moisture from your cabin, and helps reduce heat buildup inside the vehicle.

Product Features:

• The Windflector greatly reduces sunroof wind noise and air turbulence
• Prevents the rain from entering the sunroof opening while driving
• Helps reduce heat buildup inside the vehicle
• Available in 5 different sizes for a perfect fit
• No drill installation
• Installs quickly and easily with 3M automotive-grade adhesive

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 83″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

ATP Speedometer Cable Core Kit provides a lower cost alternative to cable repair when the cable core has broken or kinked. Each kit includes 0.130″ diameter S.A.E./O.E.M. standard multi-coiled wire cable with squared end, universal metal tip and spacer washer. Cut cable end to desired length and attach tip using staking tool (included). The overall length of the cable core is 120″.

Product Features:

• Easy to install
• Will fit many custom applications
• Low cost alternative

This turn signal cam is designed to match the fit and function of the original cam on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this turn signal cam is designed to match the fit and function of the original cam on specified vehicles
• Restores functionality – reliable replacement for an original part that has failed due to wear or collision damage
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Standard Installation Kit. This is the standard Grant Steering Wheel Installation Kit. These kits may be used to install all Classic Series, Challenger Series or Signature Series Steering Wheels. Each kit contains complete step-by-step instructions, a die cast hub, grade 5 hardware and matte black trim pieces.

Product Features:

• Use To Install All Classic, Challenger Or Signature Series Wheels
• Each Kit Contains Complete Step-By-Step Instructions, A Die Cast Hub, Grade 5 Hardware And Matte Black Trim Pieces
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig
• Use with all Grant Classic/Challenger/Signature Steering Wheels

Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.

Product Features:

• Direct-fit OE replacement ensures ease of installation
• Designed to meet OE performance
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
• As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Speedometer cables connect the speedometer to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Speedometer cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

• Includes Cable Lube
• Plastic sheath protects cable from debris and water
• Comes ready to install

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Optional Billet Style Installation Kits. Grant Billet Style Installation Kits are an optional styling upgrade. The Billet Style Kits have Grant five-hole mounting pattern and can only be used to install Grant Signature Series Steering Wheels.

Product Features:

• Highly Polished With A Black Luster Finish
• Use To Install Grant Signature Series 5 Bolt Steering Wheels
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Optional Billet Style Installation Kits. Grant Billet Style Installation Kits are an optional styling upgrade. The Billet Style Kits have Grant five-hole mounting pattern and can only be used to install Grant Signature Series Steering Wheels.

Product Features:

• Highly Polished
• Use To Install Grant Signature Series 5 Bolt Steering Wheels
• ISO/ TS Certified
• Designed To Mount Our Wheel To Your Rig

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• CarQuest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.