1979 Mercury Marquis Serpentine Belt
1979 Mercury Marquis Serpentine Belt
Your 1979 Mercury Marquis might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Serpentine Belt product you desperately need.
We currently carry 8 Serpentine Belt products to choose from for your 1979 Mercury Marquis, and our inventory prices range from as little as $12.79 up to $26.49.
On top of low prices, Advance Auto Parts offers 2 different trusted brands of Serpentine Belt products for the 1979 Mercury Marquis. We only sell parts from trusted brands like CARQUEST by Dayco so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 88 reviews on our Serpentine Belt products for the 1979 Mercury Marquis from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Serpentine Belt stock in-person!
Serpentine Belt for Your 1979 Mercury Marquis
Search through our amazing selection of Serpentine Belt products for your 1979 Mercury Marquis to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060505)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's "W" profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. CARQUEST by Dayco® Poly-Rib® Belts meet or exceed SAE J1459 and SAE J2432 specifications. This belt is another CARQUEST by Dayco® product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 3 review(s)Review snapshot ® by PowerReviews
-
Works, but almost notZ
Works, but almost notZ
Submitted 2018-01-13
By Henry
From undisclosed
Felt a little long for my lincoln towny. Almost all the Way out on adjustment to get proper tension.
Bottom Line
-
I would purchase again.
I would purchase again.
Submitted 2017-08-12
By Reggie
From undisclosed
Good product.
Bottom Line
-
good
good
Submitted 2017-05-20
By Sumit
From undisclosed
working good so far
Bottom Line
from $26.49
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060495)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's "W" profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. CARQUEST by Dayco® Poly-Rib® Belts meet or exceed SAE J1459 and SAE J2432 specifications. This belt is another CARQUEST by Dayco® product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 3 review(s)Review snapshot ® by PowerReviews
-
I will buy this brand again
I will buy this brand again
Submitted 2018-02-06
By William
From undisclosed
Good belt . Fits good.
Bottom Line
-
Would buy again
Would buy again
Submitted 2018-01-24
By Henry
From undisclosed
Fair price, excellent fit, and appears to be a good quality product
Bottom Line
-
It's a premium quality belt.
It's a premium quality belt.
Submitted 2018-01-15
By David
From undisclosed
This belt works exceptionally well on my 2012 Camry LE! I've had really good results with Dayco products over the years, so I insist on them when I'm in the market for a new belt or hose.
Bottom Line
from $14.49
View Product -
Driveworks - Serpentine Belt (Part No. 505K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Read 2 review(s)Review snapshot ® by PowerReviews
-
simple low cost belt
simple low cost belt
Submitted 2011-06-21
By Dennis
From Rustburg, VA
This belt was purchased to replace my belt when I replaced my AC compressor clutch. It was very easy to install. It took about 2 minutes to install. Great price for a belt that fit right and worked great.
Bottom Line recommended
-
Perfect fit.
Perfect fit.
Submitted 2010-10-20
By Chip Off The Old Block
From Roanoke, VA
Priced right.
Bottom Line recommended
from $18.49
View Product -
Driveworks - Serpentine Belt (Part No. 490K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
Read 1 review(s)Review snapshot ® by PowerReviews
-
Perfect fit
Perfect fit
Submitted 2017-11-07
By Alejandro
From undisclosed
Perfect fit.
Bottom Line
from $13.99
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060490)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's "W" profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. CARQUEST by Dayco® Poly-Rib® Belts meet or exceed SAE J1459 and SAE J2432 specifications. This belt is another CARQUEST by Dayco® product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
Read 1 review(s)Review snapshot ® by PowerReviews
-
Sure
Sure
Submitted 2018-03-30
By Gary
From undisclosed
What can I say? It was the right size for a fair price? You can't comment any more until you determine how long it lasts...
Bottom Line
from $19.99
View Product -
Driveworks - Serpentine Belt (Part No. 495K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
from $12.79
View Product -
CARQUEST by Dayco - Poly Rib Belt, Premium (Part No. 5060500)
DescriptionDesigned for high mileage multiple-accessory drives, Dayco's "W" profile belt (patent pending) is the most innovative advancement in multi-rib belt design in over 25 years. CARQUEST by Dayco® Poly-Rib® Belts meet or exceed SAE J1459 and SAE J2432 specifications. This belt is another CARQUEST by Dayco® product proudly made in the USA.
Product Features:- The "W" profile rib has been engineered to conform to slight misalignments, the number one cause for belt noise
- Aramid noise resistant fibers embedded in the rubber make this belt run quieter in worn or misaligned pulleys
- No-Noise Advanced Design EPDM rubber compound for quiet extended life
- Made in the USA
from $20.99
View Product -
Driveworks - Serpentine Belt (Part No. 500K6)
DescriptionThis Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today's automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.
Product Features:- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OEM requirements
from $12.99
View Product
FAQs for 1979 Mercury Marquis Serpentine Belt Products
What are the most purchased Serpentine Belt products for the 1979 Mercury Marquis?
Out of 8 Serpentine Belt products for the 1979 Mercury Marquis, the most popular in our inventory are: