1979 Chevrolet Camaro Flywheels & Flexplates
Your 1979 Chevrolet Camaro might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Flywheels & Flexplates product you desperately need.
We currently carry 17 Flywheels & Flexplates products to choose from for your 1979 Chevrolet Camaro, and our inventory prices range from as little as $31.99 up to $497.99.
On top of low prices, Advance Auto Parts offers 6 different trusted brands of Flywheels & Flexplates products for the 1979 Chevrolet Camaro. We only sell parts from trusted brands like ATP so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 43 reviews on our Flywheels & Flexplates products for the 1979 Chevrolet Camaro from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Flywheels & Flexplates stock in-person!
Flywheels & Flexplates for Your 1979 Chevrolet Camaro
Search through our amazing selection of Flywheels & Flexplates products for your 1979 Chevrolet Camaro to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Carquest Premium - New Flywheel (Part No. 50-6504)
DescriptionFlywheel hot spots can cause chatter. Resurfacing a flywheel doesn't always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
Product Features:- Casting process closely monitored to ensure uniform density and balance retention
- Eliminates chance of chatter due to hot spots not always removed by resurfacing
- New ring gear ensures positive starter engagement
- Engineered to properly fit the intended application with no modifications
Read 3 review(s)Review snapshot ® by PowerReviews
-
Good replacement
Good replacement
Submitted 2017-06-25
By Jeffery
From undisclosed
Good quality!
Bottom Line NULL
-
good part exact fit
good part exact fit
Submitted 2012-12-29
By D
From North Dakota
Exact fit replacement, cheeper than resurfacing the old one, plus new ring gear
Bottom Line recommended
-
great price
great price
Submitted 2012-10-04
By dave
From tn
great for the money
Bottom Line recommended
from $98.99
View Product -
ATP - Automatic Transmission Flex Plate (Part No. Z-114)
DescriptionVehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Read 1 review(s)Review snapshot ® by PowerReviews
-
Yes
Yes
Submitted 2020-10-29
By Teresa
From Undisclosed
Good deal
Bottom Line NULL
from $47.99
View Product -
ATP - Automatic Transmission Flex Plate (Part No. Z-111)
DescriptionVehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Read 3 review(s)Review snapshot ® by PowerReviews
-
I would buy this product again..
I would buy this product again..
Submitted 2021-11-03
By Corey
From Undisclosed
Great flexplate. Better price !!
Bottom Line NULL
-
Low quality
Low quality
Submitted 2021-01-27
By Jeff
From Undisclosed
Purchased to replace a bent flex plate. This one is almost as bent as the one I replaced. You get what you pay for.
Bottom Line NULL
-
Would recommend
Would recommend
Submitted 2019-02-07
By Zack
From Undisclosed
Swapping from 3speed manual to th400 flexplate was great for an inexpensive stock replacement I needed all the holes lined up fine good buy
Bottom Line NULL
from $31.99
View Product -
Carquest Premium - New Flywheel (Part No. 50-6516)
DescriptionFlywheel hot spots can cause chatter. Resurfacing a flywheel doesn't always remove hot spots. The flywheel may look shiny and pretty, but the hot spots will often still be there. Service the System by replacing the flywheel and the clutch set at the same time. All flywheels come with a new ring gear.
Product Features:- Casting process closely monitored to ensure uniform density and balance retention
- Eliminates chance of chatter due to hot spots not always removed by resurfacing
- New ring gear ensures positive starter engagement
- Engineered to properly fit the intended application with no modifications
Read 2 review(s)Review snapshot ® by PowerReviews
-
Decent quality
Decent quality
Submitted 2020-12-20
By JOAQUIN
From Undisclosed
Seemed like a decent quality but it didnt fit my application
Bottom Line NULL
-
Poor quality
Poor quality
Submitted 2013-03-18
By larrywalk
From St Charles, MO
Flywheel had 12 5/8" diameter balancing holes averaging over 1/3" deep on one side which would appear to compromise flywheel integrity at higher rpm. Cause: Machining was not concentric with the casting.
Bottom Line not recommended
from $117.99
View Product -
Hays - Performance; Flexplate (Part No. 10-010)
DescriptionConstructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
Read 1 review(s)Review snapshot ® by PowerReviews
-
not good for the money
not good for the money
Submitted 2021-05-15
By OZ
From ATL GEORGIA
purchased this for my 1971 427 stroker Corvette,and one of the teeth chipped off the. engine was turned correctly so this should not have happened.
Bottom Line not recommended
from $133.99
View Product -
LuK - Clutch Flywheel (Part No. LFW101)
DescriptionLuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured - every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.from $105.99
View Product -
LuK - OE Quality Flywheel (Part No. LFW131)
DescriptionLuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured - every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.from $105.99
View Product -
ATP - Manual Transmission Flywheel (Part No. Z-296)
DescriptionVehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Product Features:- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
from $203.99
View Product -
Hays - Flywheels (Part No. 20-130HYS)
from $497.99
View Product -
Hays - Performance; Flywheel (Part No. 10-330)
DescriptionHays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
from $433.99
View Product -
Hays - Performance; Flywheel (Part No. 10-140)
DescriptionHays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
from $384.99
View Product -
Lakewood - Lightweight Flexplate (Part No. RM-920)
from $213.99
View Product -
Lakewood - Lightweight Flexplate (Part No. RM-901)
from $189.99
View Product -
Lakewood - OEM Replacement Flexplate (Part No. RM-902)
from $189.99
View Product -
Lakewood - OEM Replacement Flexplate (Part No. RM-903)
from $148.99
View Product -
B & M - Flexplate, 153 Tooth 55-85 Shortblock Chevy (Part No. 20237)
DescriptionAs performance levels increase, an O.E. style flexplate just won't cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955 to 1985 small block Chevy V8 engines (internally balanced) with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 inch bolt pattern, 153 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
from $136.99
View Product -
Lakewood - High Performance OEM Flexplate (Part No. RM-922)
from $103.99
View Product
FAQs for 1979 Chevrolet Camaro Flywheels & Flexplates Products
What are the most popular Flywheels & Flexplates products for the 1979 Chevrolet Camaro?
Our most popular Flywheels & Flexplates products for the 1979 Chevrolet Camaro are:What are the 1979 Chevrolet Camaro Flywheels & Flexplates products with the best customer ratings?
