1978 Volkswagen Beetle Belts and Hoses
More 1978 Volkswagen Beetle Belts and Hoses Categories
If you’re looking for an original Belts and Hoses replacement for a 1978 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Belts and Hoses to meet your needs.
Essential 1978 Volkswagen Beetle Belts and Hoses
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000438998CON)
from
$22.43
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Temperature-stable from -22F to 176F (30C to 80C).
- Delivers over 98% power efficiency.
- High performance construction.
- Polychloroprene rubber cover and body.
- Polyester fiber tensile members and a ribbed belt design.
Dayco – Bottom Cog V-Belt; 35.75 Inch Long, Exact Fit Premium Quality (Part No.15358)
from
$12.49
Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts
Product Features:
See More
Product Features:
- Provides greater durability and flexibility – 35% stronger than all previous versions
- Prevents electromechanical interference issues on modern vehicles
- Resists heat, oil and grease
- Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
ContiTech – Multi Rib (Serpentine) Belt (Part No.W100089801CON)
from
$22.63
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Temperature-stable from -22F to 176F (30C to 80C).
- Delivers over 98% power efficiency.
- High performance construction.
- Polychloroprene rubber cover and body.
- Polyester fiber tensile members and a ribbed belt design.
Bando – Multi Rib (Serpentine) Belt (Part No.W100027667BAN)
from
$13.29
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Gates – Notched V-Belt: 36.12" Long, 1 Strand, Exact Fit (Part No.9355)
from
$30.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Bando – Multi Rib (Serpentine) Belt (Part No.W100028007BAN)
from
$20.25
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
HJS – Pre Heat Transmission Hose Clamp (Part No.H101155320HJS)
from
$5.92
Pre Heat Transmission Hose Clamp
Kayser – Heater Hose (Part No.R303064064KAY)
from
$28.31
Kayser engine cooling products are designed and manufactured to exceed original equipment (OE) specifications and are engineered to operate in the highly-stressful environment of today’s higher performance cooling systems. The Kayser line of cooling system hoses are designed to meet OE standards and are subjected to rigorous quality and performance tests.
Product Features:
See More
Product Features:
- All cooling-water hose inner linings are resistant to electrochemical cracking
- high strength and resistance to oil, mud, salt, road debris, and ozone
- Resistance to distilled water and water ethylene glycol mixtures
- Resistance to air temperatures of up to 125C
CRP – Fuel Hose (Part No.E5000859948CRP)
from
$110.20
Fuel Hose
CRP – Hose – Fuel (Part No.4L30010817CRP)
from
$486.90
Hose – Fuel
CRP – Hose – Fuel (Part No.4L30010809CRP)
from
$233.30
Hose – Fuel
CRP – HOSE – FUEL (Part No.4L30010807CRP)
from
$596.98
HOSE – FUEL
ContiTech – Diesel Injection Hose (Part No.D103024165CON)
from
$20.37
ContiTech develop and produce complete line systems from the tank through to the engine. The systems comply are cost-efficient and easy-to-install. ContiTech special competence is the manufacture of tight connections between hoses, pipes and fittings and the assemblies to which these are hooked up. Safe and reliable parts are the result. The product range includes supply and return lines and ventilation lines.
Product Features:
See More
Product Features:
- OE Quality
- Good AdBlue resistance
- Safe and reliable
Popular 1978 Volkswagen Beetle Belts and Hoses Categories
1978 Volkswagen Beetle Belts and Hoses
You count on your 1978 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 12 Belts and Hoses ranging in price from $5.92 to $596.98, you’re sure to find everything you need for your 1978 Volkswagen Beetle.
Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 7 different brands like Imperial, Dayco, and CRP. 1978 Volkswagen Beetle Belts and Hoses start as low as $5.92!
Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1978 Volkswagen Beetle below to get started!
FAQs for 1978 Volkswagen Beetle Belts and Hoses
What are the most purchased Belts and Hoses for the 1978 Volkswagen Beetle?
Out of 12 Belts and Hoses for the 1978 Volkswagen Beetle, the most popular in our inventory are:
from
$12.49
This product is not rated
Bottom Cog V-Belt; 35.75 Inch Long, Exact Fit Premium Quality
V-Belts
