1977 Chevrolet C10 Carburetor

Your 1977 Chevrolet C10 might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Carburetor product you desperately need.

We currently carry 21 Carburetor products to choose from for your 1977 Chevrolet C10, and our inventory prices range from as little as $235.99 up to $587.99.

On top of low prices, Advance Auto Parts offers 3 different trusted brands of Carburetor products for the 1977 Chevrolet C10. We only sell parts from trusted brands like Edelbrock so that you can find quality parts you can count on.

Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 69 reviews on our Carburetor products for the 1977 Chevrolet C10 from previous customers.

Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Carburetor stock in-person!

Show More Show Less

Carburetor for Your 1977 Chevrolet C10

Search through our amazing selection of Carburetor products for your 1977 Chevrolet C10 to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

  • Performer Carburetor #1405 600 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #1405 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1405)

    Description


    Product Features:
    • Burnished Aluminum
    • GM/AMC-Style Throttle Linkage
    • Can Add Electric Choke PN[1478]
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    4.5
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.5
    4.5
    • 5
      5
      2022-01-12
      5
      5

      Ford 302

      Ford 302

      Submitted 2022-01-12

      By Plumber63

      From Waterloo, IN

      Installed on a 1978 Ford F150 with a 4 speed manual. Had to add a inlet pressure reducer to get it to idle properly. Replaced a old 4 barrel holly that was leaking and the 4 barrel wouldn't kick in. Runs so much smoother and has a lot more power. Beefier sound also.

      Bottom Line recommended

      Installed on a 1978 Ford F150 with a 4 speed manual. Had to add a inlet pressure reducer to get it to idle properly. Replaced a old 4 barrel holly that was leaking and the 4 barrel wouldn't kick in. Runs so much smoother and has a lot more power. Beefier sound also.

      By Plumber63 from Waterloo, IN

      BOTTOM LINE recommended

    • 5
      5
      2014-10-22
      5
      5

      Great Carb

      Great Carb

      Submitted 2014-10-22

      By Dustin

      From Texas

      I bought this carb for my SBC 350, on a 72 Nova. Fit up great to my Edelbrock Performer Intake Manifold. If you are tossing between the Manual and Electric choke, just consider how much an electric choke costs to replace if and when it goes bad. I had tossed with getting the 650CFM, but finally decided on the 600 so I wouldn't go overkill on gas and hurt my performance. I must say this carb was the best solution. Replacing my Rochester style Quadrajet with this carb increased the performance quite a bit. Just follow the instructions with the carb, and enjoy it.

      Bottom Line recommended

      I bought this carb for my SBC 350, on a 72 Nova. Fit up great to my Edelbrock Performer Intake Manifold. If you are tossing between the Manual and Electric choke, just consider how much an electric choke costs to replace if and when it goes bad. I had tossed with getting the 650CFM, but finally decided on the 600 so I wouldn't go overkill on gas and hurt my performance. I must say this carb was the best solution. Replacing my Rochester style Quadrajet with this carb increased the performance quite a bit. Just follow the instructions with the carb, and enjoy it.

      By Dustin from Texas

      BOTTOM LINE recommended

    • 5
      5
      2014-01-17
      5
      5

      good deal for the $

      good deal for the $

      Submitted 2014-01-17

      By moon

      From Wilmington NC

      best part for the best price

      Bottom Line recommended

      best part for the best price

      By moon from Wilmington NC

      BOTTOM LINE recommended

    from $397.99

  • Performer Carburetor #1407 750 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #1407 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1407)

    Description


    Product Features:
    • Burnished Aluminum
    • GM/AMC-Style Throttle Linkage
    • Can Add Electric Choke PN[1478]
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    4.5
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.5
    4.5
    • 4
      4
      2013-08-16
      4
      4

      Good workhorse of a product.

      Good workhorse of a product.

      Submitted 2013-08-16

      By PDUBS

      From Cincinnati Ohio

      Simple installation, no leaks, not tempermental.

      Bottom Line recommended

      Simple installation, no leaks, not tempermental.

      By PDUBS from Cincinnati Ohio

      BOTTOM LINE recommended

    • 4
      4
      2013-05-06
      4
      4

      good

      good

      Submitted 2013-05-06

      By 69 c10

      From spring hill fl

      This is a overall very good product

      Bottom Line recommended

      This is a overall very good product

      By 69 c10 from spring hill fl

      BOTTOM LINE recommended

    • 5
      5
      2012-05-06
      5
      5

      Good product

      Good product

      Submitted 2012-05-06

      By Chevy man

      From Temple,tx

      Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was turn my idle screw up about 1/2 turn runs perfect. Also it costs way less than the holley, great buy

      Bottom Line recommended

      Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was turn my idle screw up about 1/2 turn runs perfect. Also it costs way less than the holley, great buy

      By Chevy man from Temple,tx

      BOTTOM LINE recommended

    from $454.99

  • AVS2 Carburetor #1906 650 CFM With Electric Choke, Satin Finish (Non-EGR)

    Edelbrock - AVS2 Carburetor #1906 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1906)

    Description
    The Edelbrock #1906 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a ne

    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 650 cfm Maximum Flow Rating
    4.0
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.0
    4.0
    • 5
      5
      2021-10-16
      5
      5

      Great service! But didn't have part in stock...yet.

      Great service! But didn't have part in stock...yet.

      Submitted 2021-10-16

      By Tammy P

      From Raytown, MO

      Even though we have to wait until Monday to pick this part up, Elgin was honest, fair, and knowledgeable. It's hard to find knowledge people in Kansas City for a DYI kinda gal.

      Bottom Line recommended

      Even though we have to wait until Monday to pick this part up, Elgin was honest, fair, and knowledgeable. It's hard to find knowledge people in Kansas City for a DYI kinda gal.

      By Tammy P from Raytown, MO

      BOTTOM LINE recommended

    • 1
      1
      2020-12-31
      1
      1

      Junk

      Junk

      Submitted 2020-12-31

      By Repair man

      From New York

      Junk save your money buy a Holley

      Bottom Line not recommended

      Junk save your money buy a Holley

      By Repair man from New York

      BOTTOM LINE not recommended

    • 5
      5
      2020-07-31
      5
      5

      Tbi

      Tbi

      Submitted 2020-07-31

      By Tooner

      From Milwaukee

      This thing hits like a fuel injection edelbrock has a beautiful thing going with these, if only they had secondary power rings also that you could buy aftermarket to retro from the stream type injection I would probably buy 2

      Bottom Line recommended

      This thing hits like a fuel injection edelbrock has a beautiful thing going with these, if only they had secondary power rings also that you could buy aftermarket to retro from the stream type injection I would probably buy 2

      By Tooner from Milwaukee

      BOTTOM LINE recommended

    from $449.99

  • Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9906)

    Description
    Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
    4.0
    Read 3 review(s)

    Review snapshot ® by PowerReviews

    4.0
    4.0
    • 5
      5
      2013-09-28
      5
      5

      Easy to install. Works great.

      Easy to install. Works great.

      Submitted 2013-09-28

      By IronWill

      From Madison, AL

      The first carb I received was faulty. Advance promptly exchanged it. The second installed quickly and easily. Tuning it was a breeze. My truck drives better than ever.

      Bottom Line recommended

      The first carb I received was faulty. Advance promptly exchanged it. The second installed quickly and easily. Tuning it was a breeze. My truck drives better than ever.

      By IronWill from Madison, AL

      BOTTOM LINE recommended

    • 5
      5
      2013-01-05
      5
      5

      A World Class Product!

      A World Class Product!

      Submitted 2013-01-05

      By AutoMeister Chuck

      From Marana, AZ

      My goal when installing this carb was to keep all underhood height dimensions the same as stock, while using all the attaching parts such as air filter/ housing - exhaust man. heat tube - inlet air hose etc. along with mounting the carb to an aluminum stock chevy SB Q/Jet manifold. Most anyone that works with SB Chevy's, will know that square bore carbs and stock QJet manifolds are incompatible, due to the throttle bore spacings.In spite of the fact that E/Brock sells spacers / Adapters etc. to overcome these problems, they didn't meet with my objectives. By making my own modifications to the intake manifold - carb fuel inlet and stock air cleaner, I was able to complete a nice clean/stock installation that performs flawlessly! - right out of the box!

      Bottom Line recommended

      My goal when installing this carb was to keep all underhood height dimensions the same as stock, while using all the attaching parts such as air filter/ housing - exhaust man. heat tube - inlet air hose etc. along with mounting the carb to an aluminum stock chevy SB Q/Jet manifold. Most anyone that works with SB Chevy's, will know that square bore carbs and stock QJet manifolds are incompatible, due to the throttle bore spacings.In spite of the fact that E/Brock sells spacers / Adapters etc. to overcome these problems, they didn't meet with my objectives. By making my own modifications to the intake manifold - carb fuel inlet and stock air cleaner, I was able to complete a nice clean/stock installation that performs flawlessly! - right out of the box!

      By AutoMeister Chuck from Marana, AZ

      BOTTOM LINE recommended

    • 1
      1
      2012-04-14
      1
      1

      Don't buy rebuild here

      Don't buy rebuild here

      Submitted 2012-04-14

      By Poncho

      From Stevensville, MI

      The carburator I purchased was defective as purchased. I wasted half a day trying to troubleshoot what should have been an easy replacement. After a great deal of fussing, I went on Edelbrock's web site and diagnosed a leaking float. I had to use one of the floats out of my old carb to replaceone in this refurbished carb. I was very dissapointed with this purchase, and now my old carb is not useable since there's a bad float.

      Bottom Line not recommended

      The carburator I purchased was defective as purchased. I wasted half a day trying to troubleshoot what should have been an easy replacement. After a great deal of fussing, I went on Edelbrock's web site and diagnosed a leaking float. I had to use one of the floats out of my old carb to replaceone in this refurbished carb. I was very dissapointed with this purchase, and now my old carb is not useable since there's a bad float.

      By Poncho from Stevensville, MI

      BOTTOM LINE not recommended

    from $413.99

  • AVS2 Carburetor #1905 650 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - AVS2 Carburetor #1905 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1905)

    Description
    The Edelbrock #1905 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a ne

    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 650 cfm Maximum Flow Rating

    from $411.99

  • Remanufactured Carburetor 2 Barrel

    United Carb - Remanufactured Carburetor 2 Barrel (Part No. 3-3485)

    Description
    Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

    from $235.99

  • Carburetor - 770 CFM Alum Street Avenger E/C

    Holley - Carburetor - 770 CFM Alum Street Avenger E/C (Part No. 0-83770)

    Description
    Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

    Product Features:
    • Features A Tumble Polished Finish Can Also Be Hand Polished
    • Optimized Street Calibration That Works Out Of The Box
    • Factory Preset Electric Choke For Easy Startups
    • Glass Fuel Level Sight Windows For Easy Safe Float Adjustments
    • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
    • 4 Corner Idle Allows You To Precisely Control Your Idle System
    • No Unnecessary Trips Back To The Parts Store
    • Limited Lifetime Warranty
    • 100% Wet Flow Tested By Holley Technicians

    from $587.99

  • Performer Carburetor #1413 800 CFM With Electric Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #1413 800 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1413)

    Description


    Product Features:
    • Lightweight Burnished Aluminum
    • GM/AMC-Style Throttle Linkage
    • Electric Choke Installed from Factory
    • Easy Tuning with 2-Piece Design
    • Smooth Secondary Transition
    • Both Timed and Full Vacuum Ports
    • Includes PCV Outlet
    • Can Easily Calibrate with Rods and Jets

    from $565.99

  • Remanufactured Carburetor 4 Barrel

    United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3423)

    Description
    Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

    from $337.99

  • Remanufactured Carburetor 4 Barrel

    United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3512)

    Description
    Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

    from $321.99

  • Remanufactured Carburetor 1 Barrel

    United Carb - Remanufactured Carburetor 1 Barrel (Part No. 3-3530)

    Description
    Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

    from $295.99

  • Remanufactured Carburetor 4 Barrel

    United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3491)

    Description
    Made in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.

    from $354.99

  • Performer Carb #14063 600 CFM w/Electric Choke, Black Powder Coated (Non-EGR)

    Edelbrock - Performer Carb #14063 600 CFM w/Electric Choke, Black Powder Coated (Non-EGR) (Part No. 14063)

    Description
    The Edelbrock 14063 Performer Series 600 CFM electric choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.

    Product Features:
    • Black Powder Coated Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 600 cfm Maximum Flow Rating

    from $527.99

  • Performer Carb #14073 750 CFM W/ Manual Choke, Black Powder Coated (Non-EGR)

    Edelbrock - Performer Carb #14073 750 CFM W/ Manual Choke, Black Powder Coated (Non-EGR) (Part No. 14073)

    Description
    The Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S

    Product Features:
    • Black Powder Coated Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 750 cfm Maximum Flow Rating

    from $511.99

  • Reman Thunder AVS Carb #18269 650 CFM W/ Electric Choke, Satin Finish (Non-EGR)

    Edelbrock - Reman Thunder AVS Carb #18269 650 CFM W/ Electric Choke, Satin Finish (Non-EGR) (Part No. 18269)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Aluminum Body Material
    • Electric Choke Type
    • 650 cfm Maximum Flow Rating

    from $483.99

  • Performer Carb #14053 600 CFM Manual Choke, Black Powder Coated Finish (Non-EGR)

    Edelbrock - Performer Carb #14053 600 CFM Manual Choke, Black Powder Coated Finish (Non-EGR) (Part No. 14053)

    Description
    The Edelbrock 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S

    Product Features:
    • Black Powder Coated Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 600 cfm Maximum Flow Rating

    from $477.99

  • Reman Thunder AVS Carb #18259 650 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - Reman Thunder AVS Carb #18259 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 18259)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Aluminum Body Material
    • Manual Choke Type
    • 650 cfm Maximum Flow Rating

    from $475.99

  • Performer Carburetor #9900 600 CFM With Electric Choke, Satin Finish (EGR)

    Edelbrock - Performer Carburetor #9900 600 CFM With Electric Choke, Satin Finish (EGR) (Part No. 9900)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 600 cfm Maximum Flow Rating

    from $425.99

  • Performer Carburetor #9962 800 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #9962 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9962)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 800 cfm Maximum Flow Rating

    from $416.99

  • Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9913)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Electric Choke Type
    • 750 cfm Maximum Flow Rating

    from $414.99

  • Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR)

    Edelbrock - Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9907)

    Description
    Product Features:
    • Satin Finish
    • 4 Barrel
    • Annular Booster Type
    • Manual Choke Type
    • 750 cfm Maximum Flow Rating

    from $395.99

FAQs for 1977 Chevrolet C10 Carburetor Products

More Popular Parts for All Makes