1976 Porsche 914 Brake Parts
More 1976 Porsche 914 Brake Parts Categories
If you’re looking for an original Brake Parts replacement for a 1976 Porsche 914, you can search through our selection below. You’ll also find aftermarket and OEM Brake Parts to meet your needs.
Essential 1976 Porsche 914 Brake Parts
Otto Zimmermann – Coat-Z Brake Disc (Rotor) (Part No.N100022859ZIC)
from
$63.79
Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- No formation of rust at the hub and herewith improved visual appearance
- Immediate functional capability without removal of the coating before mounting
- Excellent deceleration action and no distortion of friction ring at high temperatures
- Substantial weight saving and therefore less unsprung mass
- Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
- Hot spots prevented by optimized design of ventilation channels
- 1:1 exchange of original disc possible
- Not subject to registration: general ABE certification supplied with disc
- No conversion required for brake tuning
Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)
from
$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.
Product Features:
See More
Product Features:
- Each unit is 100% new, providing consistent performance when servicing your brake system
- Easy to transfer for on-the-spot master cylinder bleeding
- Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
- Easy to clean to ensure no cross contamination
- Durability for long lasting performance
Sebro – Coated Brake Rotor (Part No.N100020115SEB)
from
$129.96
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
Zimmermann – Coat-Z Sport Brake Disc (Rotor) (Part No.N1000670578ZXC)
from
$124.90
The Zimmermann Sport Brake Disc was developed as a result of experience of brake discs in series-production vehicles in connection with racing. The brake system is optimized by combining high-quality cast materials with a slotted or cross-drilled braking surface. Coat-Z Protective Coating – The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Material quality / high carbon – Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.
Product Features:
See More
Product Features:
- Coat-Z protective anti-corrosion coating
- Better wet braking performance by permanent expulsion of brake dust and water
- Sporty look
- Because of the anti-corrosion protection Coat Z better finish – especially of the hub and the outer diameter
- Noticeable improvement in the braking power of your car
- Prevention of brake fade
- Countersinking of holes doubles up as wear indicator
- 1:1 exchange of original disc possible
- No additional adaption necessary
- Not subject to registration: general ABE certification supplied with disc
Sebro – Coated Brake Rotor (Part No.N100020114SEB)
from
$105.21
The Sebro coated brake disc is an OE-Quality replacement that is manufactured to withstand the higher demands of braking extremes from today’s high performance European vehicles. For the sustainable improvement of corrosion protection and also for good looking our break discs are silver grey coated in the pot- and outer diameter area. By the automatic coating process a high quality with steady coating thickness is guaranteed. In the uncoated areas all components are provided with suitable corrosion protection.
Product Features:
See More
Product Features:
- OE-Equivalent and Direct fit Application
- high carbon content disc
- Protective coating that resists corrosion
- Provides a higher friction coefficient.
- Resistant to vibrations and noise.
- Improved thermal efficiency
FTE – Brake Caliper Repair Kit (Part No.N1050324465FTE)
from
$39.45
FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.
Product Features:
See More
Product Features:
- Guaranteed factory fit to original equipment specifications
- Meets or exceeds original equipment factory safety standards
Elring – Distributor O-Ring (Part No.F210154475ELR)
from
$1.18
The Elring Distributor O-Ring is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA93105)
from
$23.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA36872)
from
$27.49
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
- Tensile minimum load holds up to 1800 N
- All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
- Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
- Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
- Brand may vary by location
Popular 1976 Porsche 914 Brake Parts Categories
1976 Porsche 914 Brake Parts
You count on your 1976 Porsche 914 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 8 Brake Parts ranging in price from $1.18 to $129.96, you’re sure to find everything you need for your 1976 Porsche 914.
Brands matter. If you want to shop a specific Brake Parts brand, we stock 7 different brands like Cardone, Carquest, and Otto Zimmermann. 1976 Porsche 914 Brake Parts start as low as $1.18!
One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 13 extensive product reviews on 1976 Porsche 914 Brake Parts.
Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 1976 Porsche 914 below to get started!
Top-Rated Brake Parts Brands For Your 1976 Porsche 914
Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1976 Porsche 914 running right for years to come. In our inventory you’ll find brands like Cardone, Carquest, Otto Zimmermann, and even more.
Popular Cardone Brake Parts
You’ll find popular Cardone brand products across Brake Master Cylinders. All are waiting to get your 1976 Porsche 914 back on the road. Some of the top-rated Cardone products in these categories are:
FAQs for 1976 Porsche 914 Brake Parts
What are the most purchased Brake Parts for the 1976 Porsche 914?
Out of 8 Brake Parts for the 1976 Porsche 914, the most popular in our inventory are:
