1974 GMC G35/G3500 Van Performance Carburetor

Performance Carburetor for Your 1974 GMC G35/G3500 Van

Search through our amazing selection of Performance Carburetor products for your 1974 GMC G35/G3500 Van to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.

• 

  Edelbrock - Performer Carburetor #1411 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1411)

  Description

  
  
  Product Features:

  • Burnished Aluminum
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2014-07-10

    5

    5

    Looks sweet sitting on the 23 T bucket

    Looks sweet sitting on the 23 T bucket

    Submitted 2014-07-10

    By tommy

    From Aiken SC

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    Bottom Line recommended

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    By tommy from Aiken SC

    BOTTOM LINE recommended

  • 5

    5

    2012-04-07

    5

    5

    Fantastic

    Fantastic

    Submitted 2012-04-07

    By Torino Tyler

    From Cape Coral, Fl

    Looks Great and Performs Great

    Bottom Line recommended

    Looks Great and Performs Great

    By Torino Tyler from Cape Coral, Fl

    BOTTOM LINE recommended

  • 5

    5

    2010-12-28

    5

    5

    great product

    great product

    Submitted 2010-12-28

    By firewoodman

    From canfield, OH

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    Bottom Line recommended

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    By firewoodman from canfield, OH

    BOTTOM LINE recommended

  from $528.99

  View Product
• 

  Edelbrock - Performer Carb #14054 600 CFM With Manual Choke, EnduraShine Finish (Non-EGR) (Part No. 14054)

  Description

  
  
  Product Features:

  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Can Add Electric Choke PN[1478]
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet

  5.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2014-07-10

    5

    5

    Looks sweet sitting on the 23 T bucket

    Looks sweet sitting on the 23 T bucket

    Submitted 2014-07-10

    By tommy

    From Aiken SC

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    Bottom Line recommended

    Shines like a new penny.... icing on the cake .... it just tops off the motor... what else can you say.

    By tommy from Aiken SC

    BOTTOM LINE recommended

  • 5

    5

    2012-04-07

    5

    5

    Fantastic

    Fantastic

    Submitted 2012-04-07

    By Torino Tyler

    From Cape Coral, Fl

    Looks Great and Performs Great

    Bottom Line recommended

    Looks Great and Performs Great

    By Torino Tyler from Cape Coral, Fl

    BOTTOM LINE recommended

  • 5

    5

    2010-12-28

    5

    5

    great product

    great product

    Submitted 2010-12-28

    By firewoodman

    From canfield, OH

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    Bottom Line recommended

    i put this carb on my dump truck and i couldn't be more pleased. my truck runs great and has better mpg and increased power

    By firewoodman from canfield, OH

    BOTTOM LINE recommended

  from $488.99

  View Product
• 

  Edelbrock - Thunder Series AVS 800 CFM Carburetor with Electric Choke, Satin Finish (Part No. 1813)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  5.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  5.0

  5.0

  • 5

    5

    2010-08-27

    5

    5

    Looks Sharp

    Looks Sharp

    Submitted 2010-08-27

    By bigE

    From Alabama

    Have not installe don truck yet.

    Bottom Line recommended

    Have not installe don truck yet.

    By bigE from Alabama

    BOTTOM LINE recommended

  from $495.99

  View Product
• 

  Edelbrock - Performer Carburetor #1406 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1406)

  Description

  
  
  Product Features:

  • Burnished Aluminum
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet

  4.5

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2021-12-26

    5

    5

    Nice updated version

    Nice updated version

    Submitted 2021-12-26

    By Jc

    From TELFORD, TN

    Like the improved throttle response with this model.

    Bottom Line recommended

    Like the improved throttle response with this model.

    By Jc from TELFORD, TN

    BOTTOM LINE recommended

  • 5

    5

    2021-10-24

    5

    5

    Great Carburetor Right Out Of The Box!

    Great Carburetor Right Out Of The Box!

    Submitted 2021-10-24

    By Mensanot64

    From Cooper City, FL

    I recently picked up a 1966 Plymouth Satellite 2Dr 440 4SP. The previous owner didn't know much about the engine build but it does have headers, an Edelbruck Performer Intake and at bare minimum, a mild but thumpy cam. It had a Edelbrock 600 CFM 1407 (Older but still good carbs) on it. It needed a rebuild for sure but 600CFM. I have run mopars most of my life. I had a 383 with a 750CFM Double Pumper on it but that engine was built to race and big block mopars love big carburetors. First thing I have to decide for my 440 is how much CFM did I need without knowing the engine build was. Using the same old formula, Cubic Inches X RPM divided by 3456 is the common formula for an almost stock engine. Chryslers redline for 440 big blocks was around 5,000 but 5400-5500 wont hurt her. Stock HP for these engines was 375HP. I am guess mines putting out around 425HP. I also used the 5000 Redline in the formula which came out to be 636 CFM so a 650CFM carb was my first simple choice until this engine gets a rebuild. Most muscle car drivers know an Edelbrock is really a set it and forget it carb and is highly recommended for the street and occasional drag race. Now, I needed to fix my carb because it looked old and didn't tune easy. It would occasional stall plus it had a mechanical choke which are a pain for a daily driver. I went for the newer AVS2 Edelbrock since they have some minor advancements plus an electric choke. I bought this off the shelf along with some new rubber fuel lines, a new fuel filter before the mechanical fuel pump and a secondary filter (clear type from Classic Industries online) that goes between the fuel pump and the carburetor. This is required by Edelbrock for warrantees. Take pictures of the old carb first as it makes the install easier. After I replaced the carb, hooked up the electric choke and ground (you have to use the old throttle cable mount or buy a new one), it started right up. The only adjustment I had to make was bump up the idle!!!!

    Bottom Line recommended

    I recently picked up a 1966 Plymouth Satellite 2Dr 440 4SP. The previous owner didn't know much about the engine build but it does have headers, an Edelbruck Performer Intake and at bare minimum, a mild but thumpy cam. It had a Edelbrock 600 CFM 1407 (Older but still good carbs) on it. It needed a rebuild for sure but 600CFM. I have run mopars most of my life. I had a 383 with a 750CFM Double Pumper on it but that engine was built to race and big block mopars love big carburetors. First thing I have to decide for my 440 is how much CFM did I need without knowing the engine build was. Using the same old formula, Cubic Inches X RPM divided by 3456 is the common formula for an almost stock engine. Chryslers redline for 440 big blocks was around 5,000 but 5400-5500 wont hurt her. Stock HP for these engines was 375HP. I am guess mines putting out around 425HP. I also used the 5000 Redline in the formula which came out to be 636 CFM so a 650CFM carb was my first simple choice until this engine gets a rebuild. Most muscle car drivers know an Edelbrock is really a set it and forget it carb and is highly recommended for the street and occasional drag race. Now, I needed to fix my carb because it looked old and didn't tune easy. It would occasional stall plus it had a mechanical choke which are a pain for a daily driver. I went for the newer AVS2 Edelbrock since they have some minor advancements plus an electric choke. I bought this off the shelf along with some new rubber fuel lines, a new fuel filter before the mechanical fuel pump and a secondary filter (clear type from Classic Industries online) that goes between the fuel pump and the carburetor. This is required by Edelbrock for warrantees. Take pictures of the old carb first as it makes the install easier. After I replaced the carb, hooked up the electric choke and ground (you have to use the old throttle cable mount or buy a new one), it started right up. The only adjustment I had to make was bump up the idle!!!!

    By Mensanot64 from Cooper City, FL

    BOTTOM LINE recommended

  • 5

    5

    2021-08-04

    5

    5

    Great product! Easy install!

    Great product! Easy install!

    Submitted 2021-08-04

    By Jeff

    From Undisclosed

    Easy install. Performs great right out of the box on my classic!

    Bottom Line NULL

    Easy install. Performs great right out of the box on my classic!

    By Jeff from Undisclosed

    BOTTOM LINE NULL

  from $415.99

  View Product
• 

  Holley - Street Carburetor: 770 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80770)

  Description

  Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
  
  Product Features:

  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

  4.5

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 5

    5

    2011-11-17

    5

    5

    This was just what I was looking for.

    This was just what I was looking for.

    Submitted 2011-11-17

    By John55Dale

    From Sandpoint, Idaho

    This was the carb that my engine builder suggested.

    Bottom Line recommended

    This was the carb that my engine builder suggested.

    By John55Dale from Sandpoint, Idaho

    BOTTOM LINE recommended

  • 4

    4

    2011-01-22

    4

    4

    Great Carberator no regrets

    Great Carberator no regrets

    Submitted 2011-01-22

    By Bill

    From Wheat Ridge, CO

    Part of restoration process was to replace Rochester and this was a great addition to my 71 Chevy Truck. Performance is dramatically better!! Also changed to Wyland Manifold making transition from cast iron to alluminum and matching products. One suggestion I may have is to clean engine at car wash to speed installation.

    Bottom Line recommended

    Part of restoration process was to replace Rochester and this was a great addition to my 71 Chevy Truck. Performance is dramatically better!! Also changed to Wyland Manifold making transition from cast iron to alluminum and matching products. One suggestion I may have is to clean engine at car wash to speed installation.

    By Bill from Wheat Ridge, CO

    BOTTOM LINE recommended

  from $609.99

  View Product
• 

  Edelbrock - Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1825)

  Description

  New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.
  
  Product Features:

  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage

  4.5

  Read 2 review(s)

  Review snapshot ® by PowerReviews

  4.5

  4.5

  • 4

    4

    2014-04-25

    4

    4

    Performance Enhancer

    Performance Enhancer

    Submitted 2014-04-25

    By none

    From Pine, Colorado

    Please read AND understand all the instructions that are packaged with the unit BEFORE starting the installation. Obtain all the "other" parts and pieces that you may need before replacement

    Bottom Line recommended

    Please read AND understand all the instructions that are packaged with the unit BEFORE starting the installation. Obtain all the "other" parts and pieces that you may need before replacement

    By none from Pine, Colorado

    BOTTOM LINE recommended

  • 5

    5

    2013-05-03

    5

    5

    Edelbrock Off-Road Carb

    Edelbrock Off-Road Carb

    Submitted 2013-05-03

    By Tornado

    From Clay City, KY

    Put carb on rock crawler. Climb lots of hills and the carb works great. No loss of fuel when climbing steep grade. Does what I bought it to do.

    Bottom Line recommended

    Put carb on rock crawler. Climb lots of hills and the carb works great. No loss of fuel when climbing steep grade. Does what I bought it to do.

    By Tornado from Clay City, KY

    BOTTOM LINE recommended

  from $427.99

  View Product
• 

  Holley - Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80670)

  Description

  Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
  
  Product Features:

  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run

  4.0

  Read 3 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 5

    5

    2018-04-04

    5

    5

    i would buy again

    i would buy again

    Submitted 2018-04-04

    By keith

    From undisclosed

    great carb

    Bottom Line NULL

    great carb

    By keith from undisclosed

    BOTTOM LINE NULL

  • 1

    1

    2013-08-01

    1

    1

    TROUBLES

    TROUBLES

    Submitted 2013-08-01

    By Scott

    From Gainesville , Fl

    Install the street avenger on my truck was fine for around 100 miles and then started smelling raw gas seen gas leaking from the secondary throttle shaft now have to send it in for warranty what a piece of trash

    Bottom Line not recommended

    Install the street avenger on my truck was fine for around 100 miles and then started smelling raw gas seen gas leaking from the secondary throttle shaft now have to send it in for warranty what a piece of trash

    By Scott from Gainesville , Fl

    BOTTOM LINE not recommended

  • 3

    3

    2012-10-27

    3

    3

    Easy Install

    Easy Install

    Submitted 2012-10-27

    By John Wayne

    From Blount County, Tn.

    This carburetor was instaled on a pickup that is driven mostly on weekends. It was very easy to instal I am having issues with fast idle and choke adjustment.

    Bottom Line not recommended

    This carburetor was instaled on a pickup that is driven mostly on weekends. It was very easy to instal I am having issues with fast idle and choke adjustment.

    By John Wayne from Blount County, Tn.

    BOTTOM LINE not recommended

  from $701.99

  View Product
• 

  Edelbrock - Performer Carburetor #9905 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9905)

  Description

  Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.

  4.0

  Read 1 review(s)

  Review snapshot ® by PowerReviews

  4.0

  4.0

  • 4

    4

    2013-01-11

    4

    4

    easy install

    easy install

    Submitted 2013-01-11

    By '67 LTD 428

    From wichita ks

    works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not interfere with each other. also i no longer have over drive need to find out why and the back to barrels on the carb do not open all the way again need to figure out why. the response is still impressive and my car is drivable so it did serve its purpose for now. i would reccommend this to someone else as the carburetor itself did not need any adjustments to the fuel and air mixtures my car is now running better than before.

    Bottom Line recommended

    works good when you have all the parts for it after putting the extra parts on i had to modify them so the tranny kickdown and throttle lever did not interfere with each other. also i no longer have over drive need to find out why and the back to barrels on the carb do not open all the way again need to figure out why. the response is still impressive and my car is drivable so it did serve its purpose for now. i would reccommend this to someone else as the carburetor itself did not need any adjustments to the fuel and air mixtures my car is now running better than before.

    By '67 LTD 428 from wichita ks

    BOTTOM LINE recommended

  from $399.99

  View Product
• 

  Edelbrock - Thunder Carburetor #18064 650 CFM, Electric Choke, EnduraShine (Part No. 18064)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  from $578.99

  View Product
• 

  Edelbrock - Performer Carb #1400 600 CFM W/ Electric Choke, Satin (EGR), Chevy SB 350 (Part No. 1400)

  Description

  
  
  Product Features:

  • 50-State Street Legal for all 1980 ; Earlier GM V8
  • Calibrated for Maximum Fuel Economy
  • Lightweight Burnished Aluminum
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Smooth Secondary Transition
  • Includes Only Timed Vacuum Port
  • Includes EGR ; Fuel Vapor Outlet

  from $525.99

  View Product
• 

  Edelbrock - Quadrajet Carburetor Replacement #14065, 600 CFM, Square Flange, Satin (Part No. 14065)

  Description

  This kit includes all the necessary hardware to replace the factory Quadrajet carburetor on a factory Quadrajet manifold with an Edelbrock Performer Series carburetor.

  from $635.99

  View Product
• 

  Edelbrock - Thunder Series AVS 800 CFM Carburetor - Electric Choke, EnduraShine Finish (Part No. 18134)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  from $622.99

  View Product
• 

  Holley - Street Carburetor: 570 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80570)

  Description

  Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
  
  Product Features:

  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run

  from $609.99

  View Product
• 

  Edelbrock - Thunder Series AVS 800 CFM Carburetor - Manual Choke, EnduraShine Finish (Part No. 18124)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  from $570.99

  View Product
• 

  Edelbrock - Performer Carburetor #1412 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1412)

  Description

  
  
  Product Features:

  • Lightweight Burnished Aluminum
  • GM/AMC-Style Throttle Linkage
  • Can Add Electric Choke PN[1478]
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
  • Can Easily Calibrate with Rods and Jets

  from $542.99

  View Product
• 

  Edelbrock - Performer Carb #14064 600 CFM With Electric Choke, EnduraShine Finish (Non-EGR) (Part No. 14064)

  Description

  
  
  Product Features:

  • EnduraShine Finish
  • GM/AMC-Style Throttle Linkage
  • Electric Choke Installed from Factory
  • Easy Tuning with 2-Piece Design
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet

  from $541.99

  View Product
• 

  Edelbrock - Reman Performer Carb #9936 800 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9963)

  Description

  Product Features:

  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Electric Choke Type
  • 800 cfm Maximum Flow Rating

  from $527.99

  View Product
• 

  Edelbrock - Reman Thunder AVS Carb #18139 800 CFM W/ Electric Choke, Satin Finish (Non-EGR) (Part No. 18139)

  Description

  Product Features:

  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Electric Choke Type
  • 800 cfm Maximum Flow Rating

  from $510.99

  View Product
• 

  Edelbrock - Thunder AVS Carburetor #1826 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1826)

  Description

  New or reconditioned 650cfm. Square-flange. Electric choke without EGR. Primary jet 0.095. Secondary jet 0.098. Metering Rod 0.065 x 0.047. Dual plane intake. Spring loaded needles and seat increase performance. New qwik-tune adjustable secondary air valve. Distinctive black accented hardware. Lightweight ball burnished aluminum. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage.
  
  Product Features:

  • Spring Loaded Needles/Seat Increase Performance
  • New Qwik-Tune Adjustable Secondary Air Valve
  • Distinctive Black Accented Hardware
  • Lightweight Ball-Burnished Aluminum
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage

  from $464.99

  View Product
• 

  Edelbrock - Thunder Series AVS 800 CFM Carburetor with Manual Choke, Satin Finish (Part No. 1812)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  from $443.99

  View Product
• 

  Edelbrock - Reman Thunder AVS Carb #18069 650 CFM W/ Electric Choke, Satin Finish (Non-EGR) (Part No. 18069)

  Description

  Product Features:

  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Electric Choke Type
  • 650 cfm Maximum Flow Rating

  from $435.99

  View Product
• 

  Edelbrock - Reman Thunder AVS Carb #18129 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 18129)

  Description

  Product Features:

  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 800 cfm Maximum Flow Rating

  from $413.99

  View Product
• 

  Edelbrock - Thunder AVS Carburetor #1805 650 CFM, Manual, Square Bore, Polished (Part No. 1805)

  Description

  New qwik-tune adjustable secondary air valve. Optional single or dual fuel inlet. Distinctive black accented hardware. No gaskets below fuel level to prevent leakage. Metering rod and step up springs can be changed easily. GM and AMC style throttle linkage. Exclusive 12 month complete satisfaction warranty.
  
  Product Features:

  • New Qwik-Tune Adjustable Secondary Air Valve
  • Optional Single Or Dual Fuel Inlet
  • Distinctive Black Accented Hardware
  • No Gaskets Below Fuel Level to Prevent Leakage
  • Metering Rod/Step Up Springs Can Be Changed Easily
  • GM/AMC-Style Throttle Linkage
  • Exclusive 12 Month Complete Satisfaction Warranty

  from $408.99

  View Product
• 

  Edelbrock - Reman Thunder AVS Carb #18059 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 18059)

  Description

  Product Features:

  • Satin Finish
  • 4 Barrel
  • Aluminum Body Material
  • Manual Choke Type
  • 650 cfm Maximum Flow Rating

  from $400.99

  View Product