1968 Oldsmobile Toronado Transmission Parts
More 1968 Oldsmobile Toronado Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1968 Oldsmobile Toronado, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1968 Oldsmobile Toronado Transmission Parts
Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMC1023)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ATP – AT OIL PUMP ORING (Part No.SO-21)
from
$8.99
AT OIL PUMP ORING
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242012)
from
$52.99
Product Features:
See More
- Mid-size and full-size cars, pickups
- GVWR up to 18,000 lbs.; towing up to 3,500 lbs
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Edelbrock – Automatic Trans Cable Adapter #8026 for GM 2004R, 700R4, 4L60 Transmissions (Part No.8026)
from
$18.99
Product Features:
See More
- Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
- This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
- The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.
ATP – AT SEL SHAFT SEAL (Part No.SO-19)
from
$7.99
AT SEL SHAFT SEAL
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)
from
$32.99
OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.
Product Features:
See More
Product Features:
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
- OEM specified
- Low-odor, non-corrosive formula
- Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)
Driveworks – Wheel Bearing (Part No.S-RW-508-BR)
National – Multi Purpose Seal (Part No.6712NA)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
B & M – Automatic Shifter, Magnum Grip Pro Stick with Cover (Part No.81040)
from
$529.99
The Magnum Grip Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate
Product Features:
See More
Product Features:
- All One-Handed
- NHRA/IHRA Reverse Lockout Meets Requirements
- Mount Directly To Floor/Chassis/Or w/Quick Release
- Ultimate For Powerglide Applications
- Lightweight Brushed Alum. Cover
National – Bearings (Part No.28682)
from
$30.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Oil Seal (Part No.S-6712NA)
from
$6.29
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – AT SOLENOID SEAL (Part No.JO-15)
from
$3.99
AT SOLENOID SEAL
ATP – AT CLUTCH PLATE (Part No.JC-50)
from
$8.99
AT CLUTCH PLATE
Pro-King – Automatic Transmission Basic Rebuild Kit (Part No.KB-828)
from
$84.99
This Basic Rebuild Kit contains a complete gasket Kit and friction set. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Does not include steels or filter
Pro-King – Automatic Transmission Deluxe Rebuild Kit (Part No.KS-15)
from
$222.99
One of the most complete rebuild kits in the automatic transmission industry today. Each Rebuild Kit contains only the highest quality parts that meet or exceed OE specifications.
Product Features:
See More
Product Features:
- Include steels, frictions, gaskets, and filter
- Includes Band and Modulator (if applicable)
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM15)
from
$157.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
Pro-King – Automatic Transmission Remanufactured Torque Converter (Part No.GM71CW)
from
$171.99
Remanufactured using industry-leading techniques to assure enhanced torque performance and extended life. Each unit is harmonically balanced and leak tested with any inherent OE weaknesses corrected. Pro-King torque converters are subject to random ISO 9001 quality tests before leaving the factory.
Product Features:
See More
Product Features:
- Fluid Balanced
ATP – AT EXT HOUSING SEAL (Part No.HO-8)
from
$11.99
AT EXT HOUSING SEAL
ATP – AT FRT PUMP BUSHING (Part No.CB-4)
from
$10.99
AT FRT PUMP BUSHING
ATP – AT FRT PUMP BUSHING (Part No.CB-30)
from
$11.99
AT FRT PUMP BUSHING
Anchor – Transmission Mount: Rear, 1 Piece (Part No.2360)
from
$8.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 70-93; CADI 76-80; CHEV 65-93; GMC 73-87; OLDS 68-92; PONT 70-89;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1965-1993
- Weight approx: 1 Lbs
- HEIGHT: 1.85 INCH / 47 MM WITHOUT STUD
- STUD AND BOLT HOLES INLINE
- STUD: M10-1.5, 28 MM
- MOUNT HOLES: 4.0 INCH / 101.6 MM ELONGATED
Anchor – Transmission Mount: Left, 1 Piece (Part No.2779)
from
$46.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 88-91; CADI 87-92; OLDS 89-91;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1987-1992
- Weight approx: 5 Lbs
- HYDRAULIC
Anchor – Transmission Mount: Left, 1 Piece (Part No.2671)
from
$17.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to BUIC 86-88; OLDS 86-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1986-1988
- Weight approx: 3 Lbs
ATP – AT BANNER KIT (Part No.JM-10)
from
$168.99
AT BANNER KIT
ATP – AT OVERHAUL KIT (Part No.JGS-52)
from
$76.99
AT OVERHAUL KIT
Popular 1968 Oldsmobile Toronado Transmission Parts Categories
1968 Oldsmobile Toronado Transmission Parts
You count on your 1968 Oldsmobile Toronado to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 43 Transmission Parts ranging in price from $3.99 to $779.99, you’re sure to find everything you need for your 1968 Oldsmobile Toronado.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 10 different brands like Imperial, Permatex, and Anchor. 1968 Oldsmobile Toronado Transmission Parts start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 172 extensive product reviews on 1968 Oldsmobile Toronado Transmission Parts. Some of the top-rated Transmission Parts products we carry are Automatic Transmission Vacuum Modulator with 4.6 stars and Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty with 4.5 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1968 Oldsmobile Toronado below to get started!
Top-Rated Transmission Parts Brands For Your 1968 Oldsmobile Toronado
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1968 Oldsmobile Toronado running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, Anchor, and even more.
Popular ATP Transmission Parts
You’ll find popular ATP brand products across Automatic Transmission Parts and Transmission Seals. All are waiting to get your 1968 Oldsmobile Toronado back on the road. Some of the top-rated ATP products in these categories are:
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1968 Oldsmobile Toronado, and some of our most reviewed Imperial parts include:
FAQs for 1968 Oldsmobile Toronado Transmission Parts
What are the most purchased Transmission Parts for the 1968 Oldsmobile Toronado?
Out of 43 Transmission Parts for the 1968 Oldsmobile Toronado, the most popular in our inventory are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
What are the top-rated 1968 Oldsmobile Toronado Transmission Parts?
Top-rated Transmission Parts for your 1968 Oldsmobile Toronado based on customer reviews/ratings are:
from
$33.49
(11)
Automatic Transmission Vacuum Modulator
“I have a 1988 Buick Reatta that recently begun to fail to shift. After trying things such as changing the filter and fluid, we eventually were recomme”
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
“Used this cooler to replace the missing factory one on my Polaris 330 ATV. Made an adapter plate to fit to the fan housing. Works great, beats the $30”
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
