1968 Chevrolet Chevelle Carburetor
Your 1968 Chevrolet Chevelle might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Carburetor product you desperately need.
We currently carry 16 Carburetor products to choose from for your 1968 Chevrolet Chevelle, and our inventory prices range from as little as $212.99 up to $643.99.
On top of low prices, Advance Auto Parts offers 3 different trusted brands of Carburetor products for the 1968 Chevrolet Chevelle. We only sell parts from trusted brands like Edelbrock so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 601 reviews on our Carburetor products for the 1968 Chevrolet Chevelle from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Carburetor stock in-person!
Carburetor for Your 1968 Chevrolet Chevelle
Search through our amazing selection of Carburetor products for your 1968 Chevrolet Chevelle to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Holley - Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No. 0-80457S)
DescriptionHolley's new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley's aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow, vacuum secondaries, and single fuel inlet makes it amazingly universal. Add to that an electric choke and this carb is super easy to use on almost anything. Don't trust your performance to just anyone, Holley is the only modular carburetor company that has been in business for over 100 years and has powered every NASCAR champion since the 60's.
Product Features:- Vibratory Polished For Good Looks
- Performance Upgrade For Stock To Mildly Modified Vehicles
- Calibrated For Excellent Street Performance Right Out Of The Box
- Factory Preset Elec Choke For Easy Startups
- For All Weights/Gearing/Trans For Smooth Open Of Secondaries
- Single Feed Fuel Inlet For Easy Installation
- Integrated 700R4/200R4 Transmission Kick Down Cable Mounting
- New Rear Bowl Fuel Inlet To Allow For Dual Feed Or Custom
- 100% Wet Flow Tested By Holley Technicians
- Adjustable Needle & Seats To Accommodate Varying Fuel Pressures
- Upgraded To A 1 Year Warranty
Read 3 review(s)Review snapshot ® by PowerReviews
-
Would buy again
Would buy again
Submitted 2019-08-03
By Lauri
From Undisclosed
Very satisfied
Bottom Line NULL
-
Perfect
Perfect
Submitted 2019-07-09
By Edward
From Undisclosed
Works perfectly. Gorgeous, nicely polished
Bottom Line NULL
-
I will always buy Holley when I need a carb.
I will always buy Holley when I need a carb.
Submitted 2018-02-16
By David
From undisclosed
Always the best carbs. Set it and forget.
Bottom Line NULL
from $459.99
View Product -
Edelbrock - AVS2 Carburetor #1906 650 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1906)
DescriptionThe Edelbrock #1906 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a ne
Product Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 650 cfm Maximum Flow Rating
Read 3 review(s)Review snapshot ® by PowerReviews
-
Great service! But didn't have part in stock...yet.
Great service! But didn't have part in stock...yet.
Submitted 2021-10-16
By Tammy P
From Raytown, MO
Even though we have to wait until Monday to pick this part up, Elgin was honest, fair, and knowledgeable. It's hard to find knowledge people in Kansas City for a DYI kinda gal.
Bottom Line recommended
-
Junk
Junk
Submitted 2020-12-31
By Repair man
From New York
Junk save your money buy a Holley
Bottom Line not recommended
-
Tbi
Tbi
Submitted 2020-07-31
By Tooner
From Milwaukee
This thing hits like a fuel injection edelbrock has a beautiful thing going with these, if only they had secondary power rings also that you could buy aftermarket to retro from the stream type injection I would probably buy 2
Bottom Line recommended
from $449.99
View Product -
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 3-3205)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.Read 1 review(s)Review snapshot ® by PowerReviews
-
No i would not buy this because of poor quality control.
No i would not buy this because of poor quality control.
Submitted 2021-10-19
By Ron
From Undisclosed
Wrong carb for the car. Even if it was right it had parts missing and damage to part of it so could not be used. Gave it one star for the ease of returning it to the local store.
Bottom Line NULL
from $269.99
View Product -
-
United Carb - Remanufactured Carburetor 2 Barrel (Part No. 3-3195)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.Read 1 review(s)Review snapshot ® by PowerReviews
-
No Way this 2 bbl fits a '68 Corvette!
No Way this 2 bbl fits a '68 Corvette!
Submitted 2013-08-11
By Tom In Missouri
From Missouri
A Rochester 2bbl carb does NOT fit a '68 Corvette or ANY Corvette. Bad information from Advance Auto Parts.
Bottom Line not recommended
from $212.99
View Product -
-
Edelbrock - AVS2 Carburetor #1905 650 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1905)
DescriptionThe Edelbrock #1905 AVS2 Series 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a ne
Product Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 650 cfm Maximum Flow Rating
from $411.99
View Product -
Holley - Carburetor - 770 CFM Alum Street Avenger E/C (Part No. 0-83770)
DescriptionSquare flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:- Features A Tumble Polished Finish Can Also Be Hand Polished
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Glass Fuel Level Sight Windows For Easy Safe Float Adjustments
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- 4 Corner Idle Allows You To Precisely Control Your Idle System
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
from $617.99
View Product -
Edelbrock - Performer Carburetor #1413 800 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1413)
Description
Product Features:- Lightweight Burnished Aluminum
- GM/AMC-Style Throttle Linkage
- Electric Choke Installed from Factory
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
- Can Easily Calibrate with Rods and Jets
from $565.99
View Product -
Holley - Street Carburetor: 870 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No. 0-80870)
DescriptionSquare flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.
Product Features:- Vibratory Polished For Good Looks
- Optimized Street Calibration That Works Out Of The Box
- Factory Preset Electric Choke For Easy Startups
- Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
- No Unnecessary Trips Back To The Parts Store
- Limited Lifetime Warranty
- 100% Wet Flow Tested By Holley Technicians
- Arrives Ready To Run
from $643.99
View Product -
Edelbrock - Performer Carb #14063 600 CFM w/Electric Choke, Black Powder Coated (Non-EGR) (Part No. 14063)
DescriptionThe Edelbrock 14063 Performer Series 600 CFM electric choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day.
Product Features:- Black Powder Coated Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 600 cfm Maximum Flow Rating
from $527.99
View Product -
Edelbrock - Performer Carb #14073 750 CFM W/ Manual Choke, Black Powder Coated (Non-EGR) (Part No. 14073)
DescriptionThe Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S
Product Features:- Black Powder Coated Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
from $511.99
View Product -
Edelbrock - Performer Carb #14053 600 CFM Manual Choke, Black Powder Coated Finish (Non-EGR) (Part No. 14053)
DescriptionThe Edelbrock 14053 Performer Series 600 CFM manual choke Black Powder Coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S
Product Features:- Black Powder Coated Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 600 cfm Maximum Flow Rating
from $477.99
View Product -
United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3199)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $432.99
View Product -
Edelbrock - Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9913)
DescriptionProduct Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 750 cfm Maximum Flow Rating
from $414.99
View Product -
Edelbrock - Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9907)
DescriptionProduct Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
from $395.99
View Product -
United Carb - Remanufactured Carburetor 4 Barrel (Part No. 3-3197)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $334.99
View Product -
United Carb - Remanufactured Carburetor 1 Barrel (Part No. 3-3193)
DescriptionMade in the USA, this remanufactured carburetor is completely disassembled and all internal parts, such as gaskets, gas filters, needle/seats and accelerator plunger cups, are discarded. All metal castings are thoroughly cleaned and restored to OEM (original equipment manufacturer) finish. Then the carburetor is reassembled to OEM-quality standards using all new component parts. Each carburetor is flow tested to simulate actual engine conditions, and all internal and external adjustments are set to OEM specifications.from $256.99
View Product
FAQs for 1968 Chevrolet Chevelle Carburetor Products
What are the most purchased Carburetor products for the 1968 Chevrolet Chevelle?
Out of 16 Carburetor products for the 1968 Chevrolet Chevelle, the most popular in our inventory are:What are the top user-rated Carburetor products for the 1968 Chevrolet Chevelle?
