1967 AC Shelby Cobra Performance and Racing Products

Essential Performance and Racing Products for 1967 AC Shelby Cobras

Hays – Flywheels (Part No.12-535)

Flywheels

from

$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

B & M – Holeshot 2400 (Part No.40412)

Holeshot 2400

from

$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Mr. Gasket – Alternator Bracket (Part No.5185)

Alternator Bracket

from

$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.

Product Features:
  • Fits Small Block Ford 1965-’69 – OEM Style
  • Polished To High Luster
  • Chrome Plated For Lasting Beauty
See More

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

from

$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Street Ready; Out Of The Box
See More

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

from

$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:
  • Vibratory Polished For Good Looks
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$338.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)

RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8

from

$454.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i

Product Features:
  • RPM Air-Gap for 302-331-347 Small-Block Ford V8
  • Air-Gap design features an open air space under the plenum
  • Separates fuel and air from engine heat
  • Larger runners over standard 7121 manifold
  • Includes nitrous bosses
See More

Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)

Performer RPM Ford Small Block 302 Intake Manifold

from

$359.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)

Performer 289 Intake Manifold for Small-Block Ford

from

$314.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal
  • Available in Multiple Finishes
See More

Upgrade your 1967 AC Shelby Cobra with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 1967 AC Shelby Cobra, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your AC or enhancing its overall performance, Performance and Racing Products are key to keeping your Shelby Cobra functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Performance and Racing Products for the 1967 AC Shelby Cobra, designed to meet your needs without breaking the bank. From Performance Flexplate replacements to Performance Fuel Systems upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1967 AC Shelby Cobra at great prices. Our Performance and Racing Products inventory for this model ranges from just $44.99 to $823.99, with an average price of $549.81. Our 12 Performance and Racing Products in stock come from 5 trusted brands, so you’re sure to find the right part for your 1967 AC Shelby Cobra without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1967 AC Shelby Cobra, we stock popular OEM and aftermarket Performance and Racing Products from top names like Edelbrock Holley, and more. Edelbrock Performance and Racing Products start at just $518.99 and boast an impressive 4.4 stars average rating from customers. With 105 customer reviews and counting, our 1967 AC Shelby Cobra Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Fluids and Chemicals, Wipers and Related Products and more to make sure your 1967 AC Shelby Cobra is always ready to roll. We’re committed to providing you with everything you need to keep your Shelby Cobra in top shape, all in one place. Start shopping confidently below for your 1967 AC Shelby Cobra!

Best-Selling Performance Flexplates for 1967 AC Shelby Cobras

Enhance the driving experience in your AC with 1 quality Performance Flexplate components, starting at $499.99.

Hays – Flywheels (Part No.12-535)

Flywheels

from

$499.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

Most Popular 1967 AC Shelby Cobra Performance Fuel Systems

Customize your AC with 5 Performance Fuel Systems products like Performance Carburetors, all priced under $699.99.

Edelbrock – Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1403)

Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$518.99
The Edelbrock 1403 Performer Series 500 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Smooth Secondary Transition
  • Both Timed and Full Vacuum Ports
  • Includes PCV Outlet
See More

Holley – Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny (Part No.0-80457S)

Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny

from

$499.99
Holley’s new 0-80457SA is constructed from aluminum which compared to its zinc counterpart equates to a weight savings of 40%! Holley’s aluminum 0-80457SA will hold its shine longer and also can be hand polished for a custom look! Its 600 CFM of airflow,

Product Features:
  • Vibratory Polished For Good Looks
See More

Holley – Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny (Part No.0-80670)

Street Carburetor: 670 CFM, Electric Choke, 4 Barrel, Square Bore, Dual Inlet, Shiny

from

$682.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80870)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet Flow Tested By Holley Technicians
  • Arrives Ready To Run
See More

Holley – Prem Street Carbs (Avengers) (Part No.0-80570)

Prem Street Carbs (Avengers)

from

$699.99
Square flange bolt pattern. Performance calibrated. The ultimate vacuum secondary street performance upgrade.

Product Features:
  • Vibratory Polished For Good Looks
  • Optimized Street Calibration That Works Out Of The Box
  • Factory Preset Electric Choke For Easy Startups
  • Quick Change Vacuum Housing Cap To Tune For Performance/Fuel Econ
  • No Unnecessary Trips Back To The Parts Store
  • Limited Lifetime Warranty
  • 100% Wet-Flow Tested To Assure It Arrives Ready To Run
  • Street Ready; Out Of The Box
See More

Top Picks for 1967 AC Shelby Cobra Performance Engines

Upgrade AC Shelby Cobras with top-quality Performance Engines parts, including 5 OEM and aftermarket selections for your 1967 model.

Edelbrock – Performer 289 Intake Manifold for Small-Block Ford (Part No.2121)

Performer 289 Intake Manifold for Small-Block Ford

from

$314.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal
  • Available in Multiple Finishes
See More

Edelbrock – Performer RPM Ford Small Block 302 Intake Manifold (Part No.7121)

Performer RPM Ford Small Block 302 Intake Manifold

from

$359.99


Product Features:
  • Best for the Ultimate in Street High-Performance
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Larger Plenum and Runners Maximizes Other Upgrades
See More

Edelbrock – RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8 (Part No.7521)

RPM Air-Gap #7521 Intake Manifold for Small-Block Ford 302-331-347 V8

from

$454.99
Edelbrock Part #7521 RPM Air-Gap intake manifold is designed for the small-block 302 CID Ford V8 or 331-347 stroker applications. The RPM Air-Gap incorporates the same race-winning technology that?s been used on our Victor Series competition intakes and i

Product Features:
  • RPM Air-Gap for 302-331-347 Small-Block Ford V8
  • Air-Gap design features an open air space under the plenum
  • Separates fuel and air from engine heat
  • Larger runners over standard 7121 manifold
  • Includes nitrous bosses
See More

Edelbrock – Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8 (Part No.2122)

Performer-Plus Camshaft Kit for Small-Block Ford 289-302 V8

from

$338.99


Product Features:
  • Designed for Optimum Torque and Acceleration
  • Maximum Performance From Idle through Mid-Range
  • Matched to Edelbrock Performer Intakes
  • Includes Hydraulic Lifters and Assembly Lube
  • Major Improvement in Throttle Response and Torque
  • Use For Daily Drivers/Trucks/Vans/RVs/4x4s
  • Take The Guesswork Out Of Camshaft Selection
See More

B & M – Holeshot 2400 (Part No.40412)

Holeshot 2400

from

$823.99
Holeshot 2400 for Ford 1966-1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 in. crank pilot (3) Application: Ford 1966 to 1991 C6 with 332, 352, 360, 390, 406, 427, 428, 429 cid with 1.848 crank pilot (3) Furnace brazed impeller New pre

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

In-Demand Performance Exhaust Products for 1967 AC Shelby Cobras

Select from 1 premium Performance Exhaust Products parts for your 1967 AC Shelby Cobra.

Mr. Gasket – Alternator Bracket (Part No.5185)

Alternator Bracket

from

$44.99
These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty. Similar in design to original equipment units.

Product Features:
  • Fits Small Block Ford 1965-’69 – OEM Style
  • Polished To High Luster
  • Chrome Plated For Lasting Beauty
See More

Top-Rated Performance and Racing Products Brands For Your 1967 AC Shelby Cobra

Shop for the best-rated brands offering Performance and Racing Products and other products for your 1967 AC Shelby Cobras. Below you’ll find some of our best rated Performance and Racing Products from Edelbrock and Holley, and more. Performance and Racing Products from these brands that fit a 1967 Shelby Cobra start at just $499.99 and are rated as high as 4.4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Edelbrock 1967 AC Shelby Cobra Performance and Racing Products

When it comes to maintaining or upgrading your 1967 AC Shelby Cobra, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Edelbrock ticks all of those boxes. We offer a wide selection of Edelbrock Performance and Racing Products, specifically designed for the 1967 AC Shelby Cobra. With over 1 Edelbrock brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $518.99. Plus, with over 3 customer reviews and an average rating of 4.4 stars, you can trust that our Edelbrock Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
from $518.99
(3)
Performer 1403 Carburetor: 500 CFM, 4 Barrel, Square Bore, Electric Choke Inlet
“only required idle mixture and idle speed adjustments.”

Popular Holley 1967 AC Shelby Cobra Performance and Racing Products

Holley auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1967 AC Shelby Cobra owner should feel confident when installing genuine Holley parts in their vehicle. To ensure the best fit and performance for your 1967 Shelby Cobra, Advance Auto Parts carries a full inventory of 2 Holley Performance and Racing Products. Plus you will be keeping your AC in peak condition while saving money because prices on these Holley Performance and Racing Products range from $499.99 to $682.99, plus, with more than 51 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
from $499.99
(45)
Street Carburetor: 600 CFM, Electric Choke, 4 Barrel, Square Bore, Single Inlet, Shiny
“very easy to install…replaced older carb this one is fresh and runs smooth … needed to do minor ajustment .. but nothing anyone couldn’t do …”

FAQs for 1967 AC Shelby Cobra Performance and Racing Products

Which Performance and Racing Products are best-sellers for 1967 AC Shelby Cobras?

Out of 12 Performance and Racing Products that fit 1967 AC Shelby Cobras, the following parts are the top sellers:

What’s the price range for 1967 AC Shelby Cobra Performance and Racing Products?

Performance and Racing Product prices for the 1967 AC Shelby Cobra start at $44.99 and go up to $823.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 1967 AC Shelby Cobra?

The average price for Performance and Racing Products for the 1967 AC Shelby Cobra is $549.81. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other AC Shelby Cobra model years?

Yes, we currently carry Performance and Racing Products for 10 model years of AC Shelby Cobras between 1962 and 1973. Performance and Racing Products are bought most frequently for the following model years: 1968, 1966, 1965, 1964, 1963, 1962, 1971, 1970, and 1969.

What are the cheapest Performance and Racing Products for my 1967 AC Shelby Cobra?

The cheapest 1967 AC Shelby Cobra Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 1967 AC Shelby Cobra?

Out of 105 reviews by customers, our 1967 AC Shelby Cobra Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 1967 AC Shelby Cobra and their top-rated products:

What types of Performance and Racing Products do you sell for my 1967 AC Shelby Cobra?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 1967 AC Shelby Cobra:

Can I get help with 1967 AC Shelby Cobra Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about AC Performance and Racing Products and more.

What is your return policy for AC Shelby Cobra Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new AC Shelby Cobra Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.