1958 Chrysler Newport Carburetor
Your 1958 Chrysler Newport might be the best vehicle you’ve ever owned. Or you may just be struggling to keep it highway-approved. No matter the situation, Advance Auto Parts has the Carburetor product you desperately need.
We currently carry 8 Carburetor products to choose from for your 1958 Chrysler Newport, and our inventory prices range from as little as $395.99 up to $565.99.
On top of low prices, Advance Auto Parts offers 1 different trusted brands of Carburetor products for the 1958 Chrysler Newport. We only sell parts from trusted brands like Edelbrock so that you can find quality parts you can count on.
Don’t take our word for it - check out customer ratings and reviews to buy with confidence. We have 22 reviews on our Carburetor products for the 1958 Chrysler Newport from previous customers.
Have parts delivered straight to your home, or find the nearest Advance Auto Parts store to check out our Carburetor stock in-person!
Carburetor for Your 1958 Chrysler Newport
Search through our amazing selection of Carburetor products for your 1958 Chrysler Newport to find exactly what you’re looking for. Compare prices and reviews to choose the best part for you.
-
Edelbrock - Performer Carburetor #1405 600 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1405)
Description
Product Features:- Burnished Aluminum
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Read 3 review(s)Review snapshot ® by PowerReviews
-
Ford 302
Ford 302
Submitted 2022-01-12
By Plumber63
From Waterloo, IN
Installed on a 1978 Ford F150 with a 4 speed manual. Had to add a inlet pressure reducer to get it to idle properly. Replaced a old 4 barrel holly that was leaking and the 4 barrel wouldn't kick in. Runs so much smoother and has a lot more power. Beefier sound also.
Bottom Line recommended
-
Great Carb
Great Carb
Submitted 2014-10-22
By Dustin
From Texas
I bought this carb for my SBC 350, on a 72 Nova. Fit up great to my Edelbrock Performer Intake Manifold. If you are tossing between the Manual and Electric choke, just consider how much an electric choke costs to replace if and when it goes bad. I had tossed with getting the 650CFM, but finally decided on the 600 so I wouldn't go overkill on gas and hurt my performance. I must say this carb was the best solution. Replacing my Rochester style Quadrajet with this carb increased the performance quite a bit. Just follow the instructions with the carb, and enjoy it.
Bottom Line recommended
-
good deal for the $
good deal for the $
Submitted 2014-01-17
By moon
From Wilmington NC
best part for the best price
Bottom Line recommended
from $397.99
View Product -
Edelbrock - Performer Carburetor #1407 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 1407)
Description
Product Features:- Burnished Aluminum
- GM/AMC-Style Throttle Linkage
- Can Add Electric Choke PN[1478]
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
Read 3 review(s)Review snapshot ® by PowerReviews
-
Good workhorse of a product.
Good workhorse of a product.
Submitted 2013-08-16
By PDUBS
From Cincinnati Ohio
Simple installation, no leaks, not tempermental.
Bottom Line recommended
-
good
good
Submitted 2013-05-06
By 69 c10
From spring hill fl
This is a overall very good product
Bottom Line recommended
-
Good product
Good product
Submitted 2012-05-06
By Chevy man
From Temple,tx
Easy install, had it installed in less then 30 mins on my 70 camaro 350 after my holley failed. It started right up only adjustment i had to do was turn my idle screw up about 1/2 turn runs perfect. Also it costs way less than the holley, great buy
Bottom Line recommended
from $454.99
View Product -
Edelbrock - Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9906)
DescriptionBurnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.Read 3 review(s)Review snapshot ® by PowerReviews
-
Easy to install. Works great.
Easy to install. Works great.
Submitted 2013-09-28
By IronWill
From Madison, AL
The first carb I received was faulty. Advance promptly exchanged it. The second installed quickly and easily. Tuning it was a breeze. My truck drives better than ever.
Bottom Line recommended
-
A World Class Product!
A World Class Product!
Submitted 2013-01-05
By AutoMeister Chuck
From Marana, AZ
My goal when installing this carb was to keep all underhood height dimensions the same as stock, while using all the attaching parts such as air filter/ housing - exhaust man. heat tube - inlet air hose etc. along with mounting the carb to an aluminum stock chevy SB Q/Jet manifold. Most anyone that works with SB Chevy's, will know that square bore carbs and stock QJet manifolds are incompatible, due to the throttle bore spacings.In spite of the fact that E/Brock sells spacers / Adapters etc. to overcome these problems, they didn't meet with my objectives. By making my own modifications to the intake manifold - carb fuel inlet and stock air cleaner, I was able to complete a nice clean/stock installation that performs flawlessly! - right out of the box!
Bottom Line recommended
-
Don't buy rebuild here
Don't buy rebuild here
Submitted 2012-04-14
By Poncho
From Stevensville, MI
The carburator I purchased was defective as purchased. I wasted half a day trying to troubleshoot what should have been an easy replacement. After a great deal of fussing, I went on Edelbrock's web site and diagnosed a leaking float. I had to use one of the floats out of my old carb to replaceone in this refurbished carb. I was very dissapointed with this purchase, and now my old carb is not useable since there's a bad float.
Bottom Line not recommended
from $413.99
View Product -
-
Edelbrock - Performer Carburetor #1413 800 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 1413)
Description
Product Features:- Lightweight Burnished Aluminum
- GM/AMC-Style Throttle Linkage
- Electric Choke Installed from Factory
- Easy Tuning with 2-Piece Design
- Smooth Secondary Transition
- Both Timed and Full Vacuum Ports
- Includes PCV Outlet
- Can Easily Calibrate with Rods and Jets
from $565.99
View Product -
Edelbrock - Performer Carb #14073 750 CFM W/ Manual Choke, Black Powder Coated (Non-EGR) (Part No. 14073)
DescriptionThe Edelbrock 14073 Performer Series 750 CFM manual choke black powder coated carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. S
Product Features:- Black Powder Coated Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
from $511.99
View Product -
Edelbrock - Performer Carburetor #9962 800 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9962)
DescriptionProduct Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 800 cfm Maximum Flow Rating
from $416.99
View Product -
Edelbrock - Performer Carburetor #9913 750 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No. 9913)
DescriptionProduct Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Electric Choke Type
- 750 cfm Maximum Flow Rating
from $414.99
View Product -
Edelbrock - Performer Carburetor #9907 750 CFM With Manual Choke, Satin Finish (Non-EGR) (Part No. 9907)
DescriptionProduct Features:- Satin Finish
- 4 Barrel
- Annular Booster Type
- Manual Choke Type
- 750 cfm Maximum Flow Rating
from $395.99
View Product
FAQs for 1958 Chrysler Newport Carburetor Products
What are the most purchased Carburetor products for the 1958 Chrysler Newport?
Out of 8 Carburetor products for the 1958 Chrysler Newport, the most popular in our inventory are: