-
Your Store:
-
Hover over the image to zoom in
Driveworks Hub and Bearing Assembly
See if this part fits a specific vehicle.
Fully integrated mounting wheel flange
Back To Top
| Bearing Type: | Tapered Roller Bearing |
| Material: | 65Mn Steel |
| OE Number(s): | 15112382 , 15134584 , 15233113 , 15740291 |
| Sealed: | Yes |
REVIEW SNAPSHOT®
by PowerReviewsDriveworksWheel Hub Assembly
(based on 74 reviews)
Ratings Distribution
75%
of respondents would recommend this to a friend.
Pros
- Easy to use (41)
- Durable (15)
- Easy to install (6)
- High-performance (3)
Cons
- Flimsy (7)
Best Uses
- Trucks (47)
- Large cars (5)
- Car & Truck:
- Mechanic (14), Casual driver (8), Auto enthusiast (7), Truck enthusiast (7)
- Reviewer Profile:
- Casual driver (12), Truck enthusiast (12), Auto enthusiast (11), Mechanic (10)
- Was this a gift?:
- No (55)
Most Liked Positive Review
Good parts need good installations too.
I installed two of these more than 5 months and 30k miles ago onto my 2001 Yukon. They are working flawlessly since. The key is to torque everything to specification and in accordance with ...Read complete review
I installed two of these more than 5 months and 30k miles ago onto my 2001 Yukon. They are working flawlessly since. The key is to torque everything to specification and in accordance with the repair manual's proceedure. Especially the axle nut! Tightening blindly or using an air gun on the axle nut will cause this, or any other hub, to fail prematurely, if not immediately. If you just slap parts on then you can count on doing it two or three times.
VS
Most Liked Negative Review
i will never buy a NTP wheelbaring again
i have changed this barring in my truck 3 times in the last 6 months. one time i got it replaced ind it was bad and i dident even drive it 1 mile. had ...Read complete review
i have changed this barring in my truck 3 times in the last 6 months. one time i got it replaced ind it was bad and i dident even drive it 1 mile. had to take it back off and put the one i have on the truck now. this one is bad now. i am going to have to upgrade because this is rediculus.
REVIEWS
Reviewed by 74 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
- Incompatible
Best Uses
Comments about Driveworks Wheel Hub Assembly:
wrong part wire dont plug in says it will dont listen 2 them
- Was this a gift?:
- No
Pros
- Easy To Use
- Price
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
This part was a perfect fit & only took 1½ hours to change. The old hub came right off after removing the bolts. Got lucky I guess. Would recommend this part.
- Was this a gift?:
- No
Pros
Cons
- Fell Apart Literally
- Flimsy
Best Uses
Comments about Driveworks Wheel Hub Assembly:
I brought this home and installed it on my 2001 Silverado.Backed out of the drive way and entire assemble came apart.The hub and bearing thas was pressed together just came apart.I am a professional mechanic and I knew it was installed correctly.I saw one other review saying the same thing but I ignored it.TOTAL GARBAGE.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
The product was an exact fit and installed with no problems. I only have a few hundred miles on the hub assembly so I;m not sure about durability yet.
So far it rotatees smoothly, is quiet and there is no play.
The toughest part of the install was removing the center bolt of the old assembly, very tight fit. It is best to soak everything down with penetrating oil and let set for a half hour or so after removing the brake disk and before beginning the hub assembly removal process. Using a large, fairly sharp, cold chisel and a 3 pound hammer eases removal. Just work around the old assembly giving a few blows with the chisel between the dust cover and the old hub assembly.
- Was this a gift?:
- No
Pros
Cons
- Fits Classic Body Style
Best Uses
Comments about Driveworks Wheel Hub Assembly:
Good product but does not fit the 2007 up newer body style truck even though the listing states exact fit the abs cable is wrong and there is no place to install the screw for the rotor to the hub.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
My wheel bearings in my 2003 chevy 4x4 pick up were going out. I found this part on the website with a little help from the online mechanic. It's so much easier to replace the whole wheel hub assembly rather than just the wheel bearings. this design is great. The part was very easy to install. The instructions were very detailed and easy to use. There was no new wiring to splice together, just take out the old one and plug up the new one. It fit in my 2003 chevy 4x4 just like the old one. Even the most inexperienced mechanic can do this. Once you find the part, it is very easy to take out and replace with this new one.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
Cons
- None
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
Not that easy to install, but of you take your time you can save yourself a bundle.
- Was this a gift?:
- No
Pros
- Definitely An Upgrade
- Durable
- Easy assembly
- Easy To Use
- High-Performance
Cons
- Cant Use Old Rotor
Best Uses
- 05 Escalade
Comments about Driveworks Wheel Hub Assembly:
Great product. Definitely and upgrade from stock. Just be aware that you have to purchase new rotors as well. Easy do it yourself job. dont pay a mechanic to do this for you its very simple to remove the old setup and and install this.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about Driveworks Wheel Hub Assembly:
I made the mistake and ordered a cheaper part from an online vendor and got what I paid for. They sent the incorrect part and insisted they sent the right part. Never again! I looked up the part on Advance's site, found on near me, ordered it online, picked it up that night - right on the money!
- Was this a gift?:
- No
Comments about Driveworks Wheel Hub Assembly:
Be careful of the part ordered because I ordered the wrong one.
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
18 Questions | 25 Answers
Displaying questions 1-10Previous | Next »
Q:
what tools do Ineed?Asked on 1/9/2013 by mark from harrington1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the Driveworks Wheel Hub Assembly - part# NT515036, things you will need to be replace are Floor jack, jack stand, wheel chock, 1/2-inch drive breaking bar, 1/2-inch drive socket set, spindle nut socket --- usually 36 mm, 1/2-inch drive ratchet, large straight screwdriver, sand paper --- medium to light grade, bungee cord, large rubber mallet, slide hammer, c-clamp and 1/2-inch drive adjustable torque wrench. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 1/10/2013 by Vincent from AAP
Q:
what kind of warranty do i get with thisAsked on 9/23/2012 by atrain1 answer
CUSTOMER CARE
A:
This part Driveworks Wheel Hub Assembly, Part No. NT515036 has 1 Year Replacement If Defective as warranty.
This warranty is valid for 90 days from the date of purchase or any longer warranty period that may be printed on your original sales receipt. In addition, you must be the original purchaser of the part and still own the vehicle on which it was installed. This warranty cannot be transferred to anyone at any time. Replacement parts are warranted for 90 days from the date of exchange or the remainder of the warranty period, whichever is longer. Warranty periods may vary from part to part.
For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 9/24/2012 by Aaron from AAP
Q:
i HAVE A VIBRATION THAT COMES AND GOES ON MY 1500 4X4,U-JOINTS ARE GOOD.COULD THIS BE A FRONT WHEEL BEARING/HUB.ALTHOUGH WHEN JACKED UP I FEEL NO PLAY IN IT...Asked on 9/3/2012 by ROY from WESLEY CHAPEL,FL.1 answer
CUSTOMER CARE
A:
The wheel bearing may be the possible cause of the problem. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 9/3/2012 by Vincent from AAP
Q:
Will this hub fit both sides(left and right side)front?Asked on 12/7/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, it fits both sides of the front wheel.Answered on 12/7/2011 by John the Car-Doc from AAP
Q:
when in four wheel drive will a bad wheel hub cause poor performanceAsked on 11/28/2011 by Anonymous from norwalk,oh.1 answer
CUSTOMER CARE
A:
A bad wheel hub causes a wheel noise, wheel looseness, abnormal tire wear, suspension looseness and loss of steering control.Answered on 11/28/2011 by Dennis from AAP
Q:
Can the bearing be removed from the hub assembly and replaced without having to purchase the whole thing.Asked on 10/26/2011 by Dave from Pennington Gap Va.2 answers
A:
Yes This part is for 4 wheel driveAnswered on 3/2/2013 by TOM from LONDON ONTARIOCUSTOMER CARE
A:
Yes, the bearing can be replaced separately.Answered on 10/27/2011 by Dennis from AAP
Q:
Does any one know the torque specs for this part?Asked on 9/25/2011 by Anonymous1 answer
CUSTOMER CARE
A:
We would suggest you to refer the vehicle owner’s manual for the exact torque specifications of the hub assembly in order to avoid to intermittence.Answered on 9/27/2011 by Vincent from AAP
Q:
is this hub specifically for the passenger side or will it fit the driver's side also?Asked on 9/23/2011 by Anonymous from ambridge, pa1 answer
CUSTOMER CARE
A:
In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.Answered on 9/24/2011 by Vincent from AAP
Q:
Is this part for a RWD or AWD?Asked on 7/27/2011 by Anonymous1 answer
CUSTOMER CARE
A:
In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.Answered on 7/27/2011 by Vincent from AAP
Q:
Is this part fit either side of the wheel?Asked on 5/16/2011 by DIY from Schenectady, NY2 answers
CUSTOMER CARE
A:
This part fits the front side of the vehicle.Answered on 5/16/2011 by Just Ask Jacob! from AAPCUSTOMER CARE
A:
This part fits the front side of the vehicle.Answered on 5/16/2011 by Just Ask Jacob! from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
