-
Your Store:
-
Hover over the image to zoom in
Driveworks Wheel Hub Assembly
See if this part fits a specific vehicle.
Fully integrated mounting wheel flange
Back To Top
| Bearing Type: | Ball Bearing |
| Material: | 65Mn Steel |
| Sealed: | Yes |
REVIEW SNAPSHOT®
by PowerReviewsDriveworksWheel Hub Assembly
(based on 41 reviews)
Ratings Distribution
89%
of respondents would recommend this to a friend.
Pros
- Easy to use (21)
- Durable (12)
- Easy to install (4)
Cons
Best Uses
- Trucks (19)
- Large cars (5)
- SUV (5)
- Small cars (3)
- Car & Truck:
- Casual driver (6), Auto enthusiast (3), Mechanic (3), Truck enthusiast (3)
- Reviewer Profile:
- Casual driver (8), Mechanic (6), Truck enthusiast (6), Auto enthusiast (5)
- Was this a gift?:
- No (25)
Most Liked Positive Review
Don't Always Blame The Product
I recently ordered 2 National Hub Assemblies because the cheaper NTP brand that I had installed just over a year ago went bad. Not only was there a lot of slop in the bearings, ...Read complete review
I recently ordered 2 National Hub Assemblies because the cheaper NTP brand that I had installed just over a year ago went bad. Not only was there a lot of slop in the bearings, but also my ABS system was engaging every time the vehicle just about came to a stop. This time I had my Brother In-Law who is a certified mechanic help me put the National hubs on. He started by removing everything needed to the point of installing the new hubs. He then told me that if I had followed the proper procedure for torquing the axle nut, I would not be replacing them now. He estimated that I probably over torqued the 2 nuts by about 60 or 70 pounds. When he asked if I used a torque wrench, I told him I did not because I thought there was a positive stop that would not allow the bearings to be compressed too much. He told me that I killed the hubs, and I was lucky that they lasted as long as they had. He also stated that even the cheaper hub assemblies have to conform to MVSS (motor vehicle safety standards). He said while it is possible to get a bad Hub from any manufacturer, the ones that customers complain have not lasted very long, and they installed them on their own, were not installed properly (most of the time not torqued by a calibrated wrench). So long NTP hubs, please forgive me for sending you much too soon to that bone yard in the sky.
VS
Most Liked Negative Review
Yet to Be Seen
How do you rate a wheel bearing/hub assembly a week after you bought it? The proof is whether it lasts or not. My last replacements lasted 25 months. Hope these last longer. ...Read complete review
How do you rate a wheel bearing/hub assembly a week after you bought it? The proof is whether it lasts or not. My last replacements lasted 25 months. Hope these last longer. Ordering and installing was easy, other than that I can't say at this point but I am reviewing this part to get Advance Auto off my back.
REVIEWS
Reviewed by 41 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- What We Needed
Cons
Best Uses
- Large Cars
Comments about Driveworks Wheel Hub Assembly:
Replacement part met our expectations. Excellent service and immediate pick up was awesome.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
Installed easily in 45 minutes in my garage. The ABS sensor cable came with all the mounting plastic pegs so I didn't need to worry about using the old flimsy and worn out pegs. I installed it and went on a 400 mile trip for work the next day. Drove like new and no noise! I hope it last longer than the year warranty it comes with.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about Driveworks Wheel Hub Assembly:
good product great price thur internet
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
Fit tight and right and the anti lock plug wire was put together right. good for the money
Pros
- Exact fit replacement
- Good Value
Cons
- None yet
Best Uses
- Gm Suv
Comments about Driveworks Wheel Hub Assembly:
This part fit exactly, right down to the cable clamps on the ABS cable. Got 20% off for ordering online and picking up instore which made a Good value even better!! While I can't comment on durability yet (only have 500 miles on them so far) they certainly can't be any worse than the OEM parts!
- Was this a gift?:
- No
Pros
- Durable
Cons
Best Uses
Comments about Driveworks Wheel Hub Assembly:
Needed two hubs to rebuild the front end of my 2002 Bravada. After searching once again Advance had the best price and the hubs were in stock at my local store. Hubs meet or beet OE quality, were a snap to install and are performing flawlessly. Searching and finding the right part on line, confirming in stock availability and getting an on line discount were added bonuses!
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
Great product, easy to install.
- Was this a gift?:
- No
Pros
Cons
- Incompatible
Best Uses
- Large Cars
Comments about Driveworks Wheel Hub Assembly:
I HAD TO RETAP ALL 3 OF THE MOUNTING HOLES. JUST GLAD THAT I OWN A TAP AND DIE SET OR I WOULD NOT HAVE BEEN ABLE TO COMPLETE THE INSTALL. FOR A PART THAT COST OVER $100.00 ONE SHOULD NOT HAVE TO DO EXTRA WORK IN ORDER FOR THE PART TO BE INSTALLED.
- Was this a gift?:
- No
Pros
- Durable
- Easy to install
- Easy To Use
Cons
- Non yet
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
Do some research before you dive in. I looked up the torques on the axle nuts if you over torque them you can lock the bearing up and you will be replacing it in a year. Make sure you have the right tools. Put some grease on the axle threading when you are sliding the hub into place. Make sure you have a breaker bar you will use it.
- Was this a gift?:
- No
Pros
- Exact fit
Cons
- None
Best Uses
- Trucks
Comments about Driveworks Wheel Hub Assembly:
E-Z installation
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
16 Questions | 20 Answers
Displaying questions 1-10Previous | Next »
Q:
What is the country of origin for this product?Asked on 4/22/2013 by RickB from Wausau, WI1 answer
CUSTOMER CARE
A:
Advance Auto Parts does sell Made in the USA products as well as products manufactured from many other countries in order to keep our pricing competitive. Please also keep in mind that many suppliers have multiple manufacturing plants that could result in different countries of origin for the same part. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 4/22/2013 by Steve from AAP
Q:
2006 chevy trailblazer 4.2 4WD is the torque spec for these 103fp?Asked on 3/16/2013 by donnie from jackson michigan1 answer
CUSTOMER CARE
A:
Yes, with reference to your inquiry on the Driveworks Wheel Hub Assembly - Part No. NT513188, the torque specification for the axle nut on your 2006 Chevy Trailblazer would be 103/140 ft-lbs/Nm. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/18/2013 by Vincent from AAP
Q:
What size is the drive axle nut?Asked on 3/13/2013 by DJ from 466141 answer
CUSTOMER CARE
A:
This Driveworks Wheel Hub Assembly (Part No. NT513188) comes with 6 x 127 mm bolt pattern; 3-bolt modified triangular bearing module flange. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/14/2013 by Vincent from AAP
Q:
what are torque specifications on this hubAsked on 3/5/2013 by none from muskegon,michigan1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the Driveworks Wheel Hub Assembly - Part No. NT513188, the torque specification for the axle nut would be 103/140 ft-lbs/Nm. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/6/2013 by Vincent from AAP
Q:
WIIL I NEED A WHEEL PULLER TO GET THE OLD PART OFF ?Asked on 11/19/2012 by dp from Henderson, Ky.1 answer
CUSTOMER CARE
A:
The tools required to replace the wheel hub assembly are Floor jack, Jack stand, Wheel chock, Half-inch drive breaking bar, Complete metric or standard (depending on vehicle) half-inch drive socket set, Spindle nut socket (usually 36 millimeter), Half-inch drive ratchet, Large straight-edged screwdriver, Sandpaper (medium to light grade), Bungee cord, Large rubber mallet, Slide hammer, C-clamp, Half-inch drive adjustable torque wrench (recommended). For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 11/19/2012 by Steve from AAP
Q:
what is the torque for the axle nut. 2002 envoyAsked on 11/18/2012 by man "O" steel from southampton ma.1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the Driveworks Wheel Hub Assembly - Part No. NT513188, the torque specification for the axle nut on your 2002 GMC Envoy is 103/140 ft-lbs/Nm. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 11/18/2012 by John the Car-Doc from AAP
Q:
axel nut torque specs.?Asked on 9/21/2012 by rex ruler from chicago1 answer
CUSTOMER CARE
A:
For further assistance regarding Driveworks Wheel Hub Assembly Part No. NT513188, please provide the year, make, model and engine size of your vehicle. This information would help us to assist you in a better way.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 9/22/2012 by Aaron from AAP
Q:
What size is the nut that holds the hub on?Asked on 5/17/2012 by Tim from every1 answer
CUSTOMER CARE
A:
This Driveworks Wheel Hub Assembly (Part No. NT513188) comes with 6 x 127 mm bolt pattern; 3-bolt modified triangular bearing module flange. For further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 5/18/2012 by John the Car-Doc from AAP
Q:
does it take an expert to replace this part?Asked on 4/23/2012 by deb from Otisville, MI.2 answers
A:
No, it's relatively easy. Air tools could definitely help.Mine took me about an hour to replace.Answered on 10/5/2012 by corvairdoug from dayton,ohioCUSTOMER CARE
A:
Well this all depends on the skill level of whoever is removing or replacing the part. It might be a difficult task for a novice. Some may have a harder time than others who have experience. I would recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 4/25/2012 by Vincent from AAP
Q:
does this product include the wheel bearing or are they two separate parts?Asked on 3/19/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, this Driveworks Wheel Hub Assembly Part number NT513188 is a complete assembly which includes both the hub and bearings.Answered on 3/20/2012 by Steve from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
