-
Your Store:
-
Hover over the image to zoom in
Driveworks Suspension Sway Bar Link Kit
See if this part fits a specific vehicle.
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
Back To Top
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
| Bushing Color: | Blue |
| Bushing Material: | Polyurethane |
| Front or Rear Suspension: | Front Suspension |
| Linkage Material: | Q235 |
REVIEW SNAPSHOT®
by PowerReviewsDriveworksSuspension Sway Bar Link Kit
(based on 30 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to use (22)
- Durable (16)
- High-performance (7)
- Versatile (5)
- Lightweight (4)
Cons
Best Uses
- Trucks (21)
- Large cars (6)
- Car & Truck:
- Casual driver (6), Auto enthusiast (4), Mechanic (4), Truck enthusiast (3)
- Reviewer Profile:
- Casual driver (12), Auto enthusiast (11), Truck enthusiast (6), Mechanic (5), Competitive driver (3)
- Was this a gift?:
- No (20)
Most Liked Positive Review
Half right
Bought two kits. Boxes were two different sizes but labeled the same. One was the wrong part. The other was the correct part and it works well. I did like the appearance of ...Read complete review
Bought two kits. Boxes were two different sizes but labeled the same. One was the wrong part. The other was the correct part and it works well. I did like the appearance of the bushings on the wrong kit better than the ones on the correct kit.
VS
Most Liked Negative Review
Inexpensive replacement
Had to replace product in about a year and a half due to grommet failure. In only 1.5 years, the product had completely rusted the center bolt to the outer case and I had ...Read complete review
Had to replace product in about a year and a half due to grommet failure. In only 1.5 years, the product had completely rusted the center bolt to the outer case and I had to cut them off with a hacksaw. Minnesota winters.
REVIEWS
Reviewed by 30 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Durable
- Easy To Use
- Great Shipping Time
Cons
- None
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
looked great when recieved it. was perfect part we needed.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
none
- Was this a gift?:
- No
Pros
- Durable
- Easy installation
Cons
- None
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Easiest replacement repair I've ever made. No special jacks or tools needed. If stubborn to remove, reciprocating saw makes the job simple.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
exact replacement, no problems
- Was this a gift?:
- Yes
Pros
- Durable
- Easy To Use
- Lightweight
Cons
Best Uses
- Large Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
I went to get a alignment from one of the big box chain stores that have a auto/tire repair branch too. I was told i needed upper ball joints and that was it in order to get a alignment because that is what i went in for. Had it checked out by a chain store tire place and they said i needed this part. I never even knew it was broke! Not sure how it got broke but ordered one online and picked up instore saved a little with a promo code online.
I got the old one out and put this one in within probably 20 mins or so. Wasn't too bad. Never put one in before and it was really simple. It seems pretty strong and looks like it will last for a very long time.
- Was this a gift?:
- No
Pros
- Durable
- Easy to install
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Had to replace sway bar link that broke on my 98 Explorer. Picked this up and had it installed in 10 minutes. I did need a jack to lift suspension to remove old link. I wish all repairs were this easy.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
installed both in less than 15 min.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
Cons
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
These are correct length with thread lock in the nuts but I would prefer the nylon lock nuts or longer bolts and use two nuts tightened against each other.
- Was this a gift?:
- No
Pros
- Easy To Use
- Installed In 20 Minutes
Cons
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
Fast and easy to install. If you are handy with tools at all you should have no problems installing.
Pros
- Durable
- Easy to install
- Versatile
Cons
- None
Best Uses
- Large Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
product is easy and simple to install,with just simple hand tools.
It took me just under an hour to install the kit on my 03 ford sport trac.
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
9 Questions | 11 Answers
Displaying questions 1-9
Q:
What if any is the torque setting Ford Explorer SPORT 2001, 2WD, V6Asked on 8/10/2011 by Ray from Brownsville, Texas1 answer
CUSTOMER CARE
A:
I would suggest you to refer your vehicle owner’s manual for an exact torque settings.Answered on 8/16/2011 by Vincent from AAP
Q:
Are the bushings polyurethane?Asked on 8/9/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, they are made out of polyurethane.Answered on 8/10/2011 by DIY Daniel from AAP
Q:
IS THIS KIT FOR THE FRONT?Asked on 8/6/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes. This kit is for Front.Answered on 8/12/2011 by Aaron
Q:
Is this the link bar that connects from the stabilizer bar to the lower arm control? have a haynes manual for my explorer but it doesn't mention anything about a sway bar at all. wanted to be sure before buying something that i don't need.Asked on 7/10/2011 by Explorer Owner from Arkansas1 answer
CUSTOMER CARE
A:
Yes and Haynes Repair manual is available at your local Advance Auto Parts store for your explorer vehicle.Answered on 7/12/2011 by Start with Shane! from AAP
Q:
how hard is it to replaceAsked on 5/13/2011 by scotty from 88292 answers
A:
It is not hard to install but you will need to have the vehicle on a jack or preferably a jack stand and a jack under the lower control arm to jack it up so the bolt reaches all the way through. The hard part is getting the old one out. I had to hacksaw it out on my truck due to norther salt/rust.CUSTOMER CARE
A:
Well this all depends on the skill level of whoever is removing or replacing the part. Some may have a harder time than others who have experience. I would recommend purchasing a Haynes repair manual specifically for your vehicle. This should be able to assist you further into detail on how to repair or replace specific parts.Answered on 5/14/2011 by DIY Daniel from AAP
Q:
how longs the part?Asked on 12/3/2010 by tony from ludlow ma1 answer
CUSTOMER CARE
A:
This is an exact replacement of the factory part and it has the same length as stock OE Part.Answered on 12/6/2010 by Parts Guru Geo from AAP
Q:
I just installed it. There is a squeak when I turn the steering wheel from the rubber bushings on the Suspension Sway Bar Kit, do I need to lube the bushing? The item is brand new.Asked on 9/16/2010 by Rick from Wall,N.J.1 answer
CUSTOMER CARE
A:
You may need to.Answered on 9/20/2010 by Mike from AAP
Q:
Do I need to lube the bushings because thy squeak?Asked on 9/16/2010 by Rick from Wall,N.J.1 answer
CUSTOMER CARE
A:
If the bushings are squeaking i recommend that you replace them.Answered on 9/16/2010 by Kevin from AAP
Q:
Is this the link for both sides or only one? Do i need one or two?Asked on 2/8/2010 by Trey from Sulphur, LA2 answers
CUSTOMER CARE
A:
This is the link kit for just one side.Answered on 2/10/2010 by Kevin from AAPA:
Allways replace bothAnswered on 5/21/2010 by Jax from sarasota, Fl
Displaying questions 1-9
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
