-
Your Store:
-
Hover over the image to zoom in
Driveworks Suspension Sway Bar Link Kit
See if this part fits a specific vehicle.
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
Back To Top
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
| Front or Rear Suspension: | Front Suspension |
| Linkage Material: | Q235 |
REVIEW SNAPSHOT®
by PowerReviewsDriveworksSuspension Sway Bar Link Kit
(based on 29 reviews)
Ratings Distribution
92%
of respondents would recommend this to a friend.
Pros
- Easy to use (20)
- Durable (12)
- Lightweight (4)
- Easy to install (3)
Cons
Best Uses
- Large cars (5)
- Trucks (5)
- Minivan (3)
- Car & Truck:
- Casual driver (5), Mechanic (3)
- Reviewer Profile:
- Casual driver (13), Mechanic (5), Auto enthusiast (3)
- Was this a gift?:
- No (21)
Most Liked Positive Review
Sway Bar link kit
Don't have to use allen key/socket like OEM for installation. Seems rugged and well made.
Don't have to use allen key/socket like OEM for installation. Seems rugged and well made.
VS
Most Liked Negative Review
One was spot-on - the other was NOT
Replaced both sides, had 2 different boxes. The 'plain' boxed part worked great, the grease fitting was on the socket at a perfect 90 degree angle to the rod and both ends could...Read complete review
Replaced both sides, had 2 different boxes. The 'plain' boxed part worked great, the grease fitting was on the socket at a perfect 90 degree angle to the rod and both ends could be greased without problems. The other box with the 'driveworks' logo printed all over it, the grease fitting was about 10 degrees from 90 (towards the rod) and the lower grease fitting, by the axle, CANNOT BE GREASED WHILE ON THE VEHICAL. A 45 degree grease fitting would fix said problem.
REVIEWS
Reviewed by 29 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Use
- Lightweight
Cons
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
My 2008 Chrysler T/C started making clunking noises from the front suspension which was traced to worn sway bar links. The old ones were a bear to get off because of rusted bolts but these new ones went back on without a hitch. A perfect fit. The van rides and sounds like new again. For the money these Driveworks links are a great value.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Minivan
Comments about Driveworks Suspension Sway Bar Link Kit:
I was surprised being the low price. But it is well built and even has grease fittings on each end.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
- Difficult To Use
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
the grease fitting didnt want to take.
Pros
- Durable
Cons
- Poorly designed
Best Uses
- 03 Caravan
Comments about Driveworks Suspension Sway Bar Link Kit:
It's well made, the problem is the way the grease fittings are set up, you will never be able to grease the bottom fitting due to the half shaft being about an inch away. Grease it first and hope for the best, thank goodness for lifetime warranty
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
- Lightweight
- Versatile
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
easy fix...
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
Bought these sway link to replace original parts on a 2002 Voyager when I replaced the struts on the front of the vehicle. The "MOOG" brand would have worked as well but I'm not planning on keeping this vehicle for more than a year. So I chose the cheaper brand, it works exactly the same. My mechanic recomended that I get a front end alignment after the struts and sway bars were installed. I had just put new tired on about a week before and I thought this would be a good idea. So get an alignment and save tour tires too.
- Was this a gift?:
- No
Pros
- Has grease fittings
- Perfect Fit
Cons
- Need Thin Wrench To Hold
Best Uses
- Mini Van
Comments about Driveworks Suspension Sway Bar Link Kit:
First set I picked up the grease fitting holes not drilled all the way through so check this before you leave the store.
- Was this a gift?:
- No
Pros
- Easy To Use
- Lightweight
Cons
- Has Grease Fittings
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
easy to install, performs as expected, as always another good product from advance auto for the price
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Lightweight
Cons
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
this sway bar was an perfect replacement part. priced right and easy to install. was a perfect match to the orignal but much better quality. the van rides and handles bumps much better with this produst installed. easily installed and strong part
- Was this a gift?:
- No
Pros
- Easy to install
- Fit perfectly
- Solved my problem
Cons
Best Uses
- Van
Comments about Driveworks Suspension Sway Bar Link Kit:
Perfect solution for my problem.
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
10 Questions | 13 Answers
Displaying questions 1-10
Q:
does this product come pre-greased?Asked on 12/16/2012 by none1 answer
CUSTOMER CARE
A:
Sorry, this Driveworks Suspension Sway Bar Link Kit - part# DW-K7258 does not come pre-greased. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 12/16/2012 by Vincent from AAP
Q:
Do you have instructions on how to install the small silver treaded plug into the ball join housings. Should I do this before installing on the vehicle? Am I suppose to put any grease in the housing first? Am am unsure of the purpose of this piece.Asked on 6/29/2012 by Jim Mutti from Peoria, IL1 answer
CUSTOMER CARE
A:
I assume you are referring to the front damper ball joint housing. They screw into the base of the damper and the ball joint then screws into this housing. You can use any vegetable base lubricant at initial assembly itself. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 6/30/2012 by John the Car-Doc from AAP
Q:
Why do these come with grease fittings when the nylon insert has no hole for grease, so they can't be greased?????Asked on 4/21/2012 by Ric from Arkansas1 answer
CUSTOMER CARE
A:
Sorry for any inconvenience caused. This Driveworks Suspension Sway Bar Link Kit with Part No. DW-K7258 does come with a problem Solver Greaseable Type Link. For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 4/24/2012 by John the Car-Doc from AAP
Q:
got two sway bar links kits one does not have grease fittings why?Asked on 1/29/2012 by Anonymous1 answer
CUSTOMER CARE
A:
In order to best answer your question, our technicians would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 1/31/2012 by Steve from AAP
Q:
I have a 99 Dodge Caravan- So If I need both sway bar links replaced I would need to buy 2 for the front and 2 for the back based on the last answer to the previous question?Asked on 11/9/2011 by B from VA1 answer
CUSTOMER CARE
A:
Yes, if you need to replace both sway bar links, you would need to buy two for the front and two for the rear.Answered on 11/10/2011 by Vincent from AAP
Q:
Are there two link assemblies in the kit, or just one?Asked on 8/27/2011 by Anonymous from Monroeville PA1 answer
CUSTOMER CARE
A:
This sway bar link is sold individually.Answered on 8/28/2011 by Vincent from AAP
Q:
Do you have to grease it when you install it and if so what type of grease do you use?Asked on 7/1/2011 by Anonymous2 answers
A:
Synthetic is Always best. After first greasing (When you see the rubber boot start bulging), one to two pumps of the grease gun every twenty thousand miles should make it last your van's lifetimeAnswered on 6/10/2012 by Online 5 from Washington, MOCUSTOMER CARE
A:
It is always better to use lubricating grease while installing the Sway Bar Link Kit.Answered on 7/5/2011 by Steve from AAP
Q:
I have a 1999 Dodge Caravan. I have been told that the front sway bar links "have play" Will this item work on my vehicle and what is the torx on the nut when I install them?Asked on 2/23/2011 by Rick from Plainfield, IN1 answer
A:
45 foot pounds from Haynes Repair ManualAnswered on 3/4/2011 by No nickname from Riverview, FL
Q:
torq specs on nutAsked on 10/21/2010 by Anonymous1 answer
CUSTOMER CARE
A:
Are you meaning how much torque to apply for your specific vehicle?Answered on 10/21/2010 by Mike the Auto Parts Master from AAP
Q:
is this part for the front or rear?Asked on 5/28/2010 by out of luck steve from wellsburg wv3 answers
CUSTOMER CARE
A:
To further assist you can you provide the year, make, model and engine size of your vehicle.Answered on 5/28/2010 by Mike from AAP
Displaying questions 1-10
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
