-
Your Store:
-
Hover over the image to zoom in
Driveworks Suspension Sway Bar Link Kit
See if this part fits a specific vehicle.
Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.
Product Features:
Back To Top
Product Features:
- Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
- Wrench flats at the base of the stud allow for the use of sockets for easy installation
| Bolt Length: | 228 mm |
| Bolt Size: | 228, 34 mm |
| Bolt Thread Size: | 3/8-16UNF |
| Bushing Color: | Blue |
| Bushing Material: | Polyurethane |
| Front or Rear Suspension: | Front Suspension |
| Linkage Diameter: | 13 mm |
| Linkage Length: | 115.8 mm |
| Linkage Material: | Q235 |
| Linkage Thickness: | 1.25 mm |
| Linkage Width: | 10.5 mm |
REVIEW SNAPSHOT®
by PowerReviewsDriveworksSuspension Sway Bar Link Kit
(based on 11 reviews)
Ratings Distribution
78%
of respondents would recommend this to a friend.
Pros
- Easy to use (6)
- Durable (4)
Cons
Best Uses
- Trucks (8)
- Reviewer Profile:
- Truck enthusiast (4), Casual driver (3)
- Was this a gift?:
- No (10)
Most Liked Positive Review
Suspension Sway Bar Link Kit
i bought 2, might as well do them both at the same time, less work latter.
was hopping they was the blue rubbers. they looked like the cheap ones.
oh-w...Read complete review
i bought 2, might as well do them both at the same time, less work latter.
was hopping they was the blue rubbers. they looked like the cheap ones.
oh-well, black will do :)
other then the bolt being a half inch to long, it went on.
i had to jack up the lower a-fraime to get it in.
VS
Most Liked Negative Review
Bought the Moog Part
Bolt was too short, so I had to c-clamp the a-arm to the sway bar to get enough thread to start the prevailing torque nut that was not acorned on one side like the Moog...Read complete review
Bolt was too short, so I had to c-clamp the a-arm to the sway bar to get enough thread to start the prevailing torque nut that was not acorned on one side like the Moog. I then tightened the bolt until the washers compressed the bushings into the a-arm and sway bar holes and found that the bottom bushing split. I returned this part and replaced it with the Moog part and tightened the assembly until it was compressed the same way - no issue. Not sure what type of bushing material this is or what they are told it is by the manufacturer, but the quality control isn't very good and I won't buy their product again for a part that should last 10+ years. You cuurently can't buy the Moog part on-line so go to your local store to get the better part! It costs more, but you get what you pay for!
REVIEWS
Reviewed by 11 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Durable
- Good Urethane Bushings
Cons
- Difficult To Use
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Bolt is too short. Ended up buying 3/8 X 9 1/2" bolt and nylock nut. Had to elongate hole to gain more clearance for the washer and used a 1/4" drive 9/16 socket to start the nut on the bolt. Bad design of both truck and link kit.
- Was this a gift?:
- No
Pros
- Lightweight
Cons
- Flimsy
Best Uses
- Small Cars
Comments about Driveworks Suspension Sway Bar Link Kit:
Bolt was too short, so I had to c-clamp the a-arm to the sway bar to get enough thread to start the prevailing torque nut that was not acorned on one side like the Moog. I then tightened the bolt until the washers compressed the bushings into the a-arm and sway bar holes and found that the bottom bushing split. I returned this part and replaced it with the Moog part and tightened the assembly until it was compressed the same way - no issue. Not sure what type of bushing material this is or what they are told it is by the manufacturer, but the quality control isn't very good and I won't buy their product again for a part that should last 10+ years. You cuurently can't buy the Moog part on-line so go to your local store to get the better part! It costs more, but you get what you pay for!
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- 4WD
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Nuts on bolts were ovaled. Reused old nuts. Get what you pay for. Know how long your bolts and spacer need to be so you order correct part
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Large Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Initially the part did not line up with the hole, but after raising and lowering the front suspension, it was a breeze. The metal clanking sound disappeared and the steering wheel did not roll like it did before the install
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Great product!
- Was this a gift?:
- No
Pros
Cons
- Had to install upsidedown
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
Installation instructions should have come with the parts
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Lightweight
- Versatile
Cons
- Bolt a little short
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
Got 2 of these, one had blue grommets, one had black grommets. The bolt included with the blue grommets was a little short. Had to jack the suspension around to get the nut started.
Pros
- Easy to install
Cons
- Bolt was about
- Half inch to long
- Was black ruber not blue
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
i bought 2, might as well do them both at the same time, less work latter.
was hopping they was the blue rubbers. they looked like the cheap ones.
oh-well, black will do :)
other then the bolt being a half inch to long, it went on.
i had to jack up the lower a-fraime to get it in.
- Car & Truck:
- Casual Driver, Mechanic
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Driveworks Suspension Sway Bar Link Kit:
very easy to install
- Car & Truck:
- Auto Enthusiast, Casual Driver, Truck Enthusiast
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about Driveworks Suspension Sway Bar Link Kit:
Not much to say about a link - it does the job. Without testing it until it fails in 10 or 20 years who knows one from the other. This cheaper one seems similar to the more expensive ones. I'm fine with it.
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
1 Question | 1 Answer
Displaying question 1
Q:
Why is this part described as front complete ???? I ORDERED THIS FRONT COMPLETE KIT, & NOW I HAVE ONLY HALF OF A FRONT COMPLETE KIT. THIS PART ISNT NORMALLY SOLD INDIVIDUALLY. THANKS ALOT GUYS & GALS.Asked on 2/2/2012 by Anonymous from THOUSAND OAKS, CA1 answer
CUSTOMER CARE
A:
In order to best answer your question, we will need more information from you regarding your project. You can call us directly at 1-877-ADVANCE (238-2623) and our technicians would be more than happy to assist you further.Answered on 2/4/2012 by Steve from AAP
Displaying question 1
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
