-
Your Store:
-
Hover over the image to zoom in
Dorman - OE Solutions Rear Shackle Hanger
See if this part fits a specific vehicle.
Dorman’s Leaf Spring Hanger comes with all the components necessary for a complete repair. The mounting hardware provided ensures a trouble-free installation.
Product Features:
Back To Top
Product Features:
- All parts are powder-coated for long lasting corrosion protection
- Durable steel construction ensures a long life
- Direct replacement for a proper fit every time
- Leaf Spring Shackle and Bracket Kit also available from Dorman
| Hardware Included: | Yes |
| Material: | Steel |
| Orientation: | Rear |
| Spring Eye Bushing Included: | No |
REVIEW SNAPSHOT®
by PowerReviewsDorman - OE SolutionsRear Shackle Hanger
(based on 10 reviews)
Ratings Distribution
88%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
- Durable (3)
Cons
Best Uses
- Trucks (5)
- Was this a gift?:
- No (7)
Most Liked Positive Review
Nice piece ... just what we needed.
Road salt had eaten the old ones away. We installed these without removing the bed, afraid that the bed bolts would be just as rusty. Angle grinder got rid of the old brackets and...Read complete review
Road salt had eaten the old ones away. We installed these without removing the bed, afraid that the bed bolts would be just as rusty. Angle grinder got rid of the old brackets and rivet heads. Punch the old rivets out of the frame. Be sure to install the shackle bolt from the outboard side, with the nut inside the hanger,in case you ever need to remove the shackle again. Due to locknuts included with the hanger, it is far easier for two guys to install these.
VS
Most Liked Negative Review
Parts fit but
Parts fit fine, but on a 02 Ranger the back of the truck leans to the passenger side about 1 inch. There should be an adjustment or specific left and right versions. It appears...Read complete review
Parts fit fine, but on a 02 Ranger the back of the truck leans to the passenger side about 1 inch. There should be an adjustment or specific left and right versions. It appears the left bracket is a good replacment bracket, the right bracket bolts on too high up on the frame. I might be able to drill new holes in the frame to correct the offset. I may just order the correct parts from Ford.
REVIEWS
Reviewed by 10 customers
Sort by
Displaying reviews 1-10
Pros
Cons
Best Uses
- Trucks
Comments about Dorman - OE Solutions Rear Shackle Hanger:
this a bit more difficult that the rear but, doable once you realize the original bushing can be removed with a drill and bit. also driver's side requires the dropping of gas tank and a moderate amount of grinding the rivets out (at least one 4" grinding wheel down to less than 3")
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Dorman - OE Solutions Rear Shackle Hanger:
Fit good, lined right up, includes all bolts
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
Comments about Dorman - OE Solutions Rear Shackle Hanger:
This worked and fit perfectly. The hardware was a nice touch and saved a trip to the hardware store. The old bracket is riveted to the frame and requires hammering/drilling/grinding to remove but I would suggest this anytime replacing the shackle as they weaken together
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Trucks
Comments about Dorman - OE Solutions Rear Shackle Hanger:
Fit my 93 ranger, just had to grind off the old hanger rivets to install, matched holes perfect.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Lightweight
Cons
Best Uses
- Trucks
Comments about Dorman - OE Solutions Rear Shackle Hanger:
It was fairly easy to put on. The truck had a rusted one and had fell apart. After cleaning the frame it was really easy to put on. There was easy access and new bolts came with it so it went together easily.
- Was this a gift?:
- No
Pros
Cons
Best Uses
- Trucks
Comments about Dorman - OE Solutions Rear Shackle Hanger:
Road salt had eaten the old ones away. We installed these without removing the bed, afraid that the bed bolts would be just as rusty. Angle grinder got rid of the old brackets and rivet heads. Punch the old rivets out of the frame. Be sure to install the shackle bolt from the outboard side, with the nut inside the hanger,in case you ever need to remove the shackle again. Due to locknuts included with the hanger, it is far easier for two guys to install these.
- Car & Truck:
- Casual Driver
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about Dorman - OE Solutions Rear Shackle Hanger:
Both OEM hangers rusted in half so that the leaf springs were pushing against the bed. Removed the bed and ground off the rivets with a right angle grinder. These hangers bolted right up without any modification.
- Car & Truck:
- Casual Driver
- Was this a gift?:
- No
Comments about Dorman - OE Solutions Rear Shackle Hanger:
good quality and great fit
Comments about Dorman - OE Solutions Rear Shackle Hanger:
There are specific left and right rear leaf spring hangers. The fella describing an inch difference obviously purchased two left side mounts or the sales person had no idea what they were doing.
As well..... this style mount only fits trucks from 86(?)-97. So its no wonder it wont fit a 2000 something ranger.
Pros
Cons
- Lacks Adjustability
Best Uses
Comments about Dorman - OE Solutions Rear Shackle Hanger:
Parts fit fine, but on a 02 Ranger the back of the truck leans to the passenger side about 1 inch. There should be an adjustment or specific left and right versions. It appears the left bracket is a good replacment bracket, the right bracket bolts on too high up on the frame. I might be able to drill new holes in the frame to correct the offset. I may just order the correct parts from Ford.
Displaying reviews 1-10
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
12 Questions | 14 Answers
Displaying questions 1-10Previous | Next »
Q:
Can a busted hanger cause the rear end or trans to shift hard or buck. Truck has been shifting hard in first and second gear. Already replaced speed sensorAsked on 10/16/2012 by none from bloomington, in.1 answer
CUSTOMER CARE
A:
With reference to this Dorman - OE Solutions Rear Shackle Hanger - part# 722-010, the transmission control solenoid may be the possible cause of the problem on your vehicle. However, I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 10/16/2012 by Vincent from AAP
Q:
I have a 2001 ford ranger, it's 4 wheel drive. will this fit for my truck?Asked on 3/31/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, this Dorman - OE Solutions Rear Shackle Hanger (Part No. 722-010) fits your 2001 Ford Ranger.Answered on 3/31/2012 by Dennis from AAP
Q:
I have a 1997 Ranger, this hanger is for the leaf spring rear driver side, do I need a shackle kit with this hanger? Or does the leaf spring bolt right to the hanger?Asked on 2/16/2012 by Jim from Florissant, Mo1 answer
CUSTOMER CARE
A:
Yes, your need the shackle (part # 722-001) with this leaf spring hanger. The spring bolts to that and the other side of the shackle bolts to the hanger.Answered on 2/17/2012 by Dennis from AAP
Q:
will it fit left and right side?Asked on 9/13/2011 by Anonymous1 answer
CUSTOMER CARE
A:
This is a Rear Bracket Kit.
Yes, it should fit left and right side.Answered on 9/13/2011 by Aaron from AAP
Q:
is this hanger the same for both left rear and the right rear or are they side specificAsked on 5/24/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, it will fit for both the rear driver side and rear passenger side.Answered on 5/25/2011 by DIY Daniel from AAP
Q:
does this hanger work on the front of the leaf spring also. if not what part do i need. 1994 ford ranger supercab with the 4.0l 5 speed stick.Asked on 12/19/2010 by Anonymous1 answer
CUSTOMER CARE
A:
This only fits for the rear. 722-011 is the part for the front for your vehicle.Answered on 12/20/2010 by Anonymous
Q:
is the hanger different for the front and rear of the sprinng or does this hanger work for both ends with the addition of a shackle in the rear?Asked on 9/7/2010 by Anonymous1 answer
CUSTOMER CARE
A:
To further assist you on this question could you provide the vehicle's year, make, model, and engine size.Answered on 9/7/2010 by Kevin from AAP
Q:
I need the hanger for the front of the rear for a 1997 ford ranger where can I find itAsked on 7/15/2010 by Anonymous1 answer
A:
RockAuto.comAnswered on 7/17/2010 by D_town from Pittsburgh, Pa
Q:
where can I find the hanger for the front of the leaf springAsked on 7/14/2010 by Anonymous1 answer
CUSTOMER CARE
A:
To further assist you on this question could you please provide your vehicles year, make model, and engine size.Answered on 7/14/2010 by Kevin from AAP
Q:
What is the best way to releive pressure from spring when replacing? Just don't know what to expect when removing old part.Asked on 6/30/2010 by Youngblood2 answers
CUSTOMER CARE
A:
For step by step instructions i recommend that you go to your nearest Advance Auto Parts store and purchase a repair manual.Answered on 6/30/2010 by Kevin from AAPA:
Jack the truck up with a floor-jack (or sizzor-jack) at the frame. If the spring has been wedged into the bed of the truck, go to the top and beat it loose with a hammer to come out. When the truck is jacked up to the mounting height there is no pressure on the spring. Use the jack to adjust the height/level to align the bolt holes.Answered on 2/19/2011 by Dr. G, Outta KC from Kansas City, MO
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
