-
Your Store:
-
Hover over the image to zoom in
Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25'
Fit of this part varies by vehicle & equipment specs
PVF-coated low-carbon steel double-wall brake line. Coil. 3/16" x 25'.
Back To Top
| Bendable: | Yes |
| Fitting Material: | Steel |
| Line Diameter: | 0.1875 in |
| Line Length: | 0.1875 in |
| Line Material: | Steel |
| Outer Spring: | No |
| Outer Wear Guard: | Yes |
| Pre-Formed: | No |
| PVF Coating: | Yes |
| Teflon Lined: | No |
REVIEW SNAPSHOT®
by PowerReviewsPoly-ArmourPVF Steel Brake Line Coil - 3/16" x 25'
(based on 18 reviews)
Ratings Distribution
94%
of respondents would recommend this to a friend.
Pros
- Easy to use (13)
- Quality materials (9)
- Durable (5)
- Good design (4)
Cons
Best Uses
- Big jobs (8)
- Small jobs (4)
- Reviewer Profile:
- Avid do-it-yourselfer (8), Professional (7), Casual do-it-yourselfer (3)
Most Liked Positive Review
Save $$ On Brakeline Repairs!
This 25' Coil will save you $$ when you have to replace long brake lines - especially on Vans - Front-to-back line replacement.Rather than buy individual fittings at $2 each, , buy the shortest...Read complete review
This 25' Coil will save you $$ when you have to replace long brake lines - especially on Vans - Front-to-back line replacement.Rather than buy individual fittings at $2 each, , buy the shortest lengths of made-up fittings & line & cut the line to get the fittings [...]This tubing saved me a lot of time!
VS
Most Liked Negative Review
Usable - with good flaring tool.
I ended up not using this brake line because my cheapo flaring tool could not produce a usable flare; they all came out lop-sided. I ended up using pre-flared Nicopp lines...the off-the-shelf ...Read complete review
I ended up not using this brake line because my cheapo flaring tool could not produce a usable flare; they all came out lop-sided. I ended up using pre-flared Nicopp lines...the off-the-shelf lengths were close enough to what I needed & they were easy to hand-form...
REVIEWS
Reviewed by 18 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Inexpensive
Cons
- Costly Flaring Tool Req'd
- Difficult To Flare
- Difficult To Use
Best Uses
- Brake Line
- Small Jobs
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
I ended up not using this brake line because my cheapo flaring tool could not produce a usable flare; they all came out lop-sided. I ended up using pre-flared Nicopp lines...the off-the-shelf lengths were close enough to what I needed & they were easy to hand-form...
Pros
- Easy To Use
- Good Design
- Quality Materials
- Very Flexible
Cons
- None so far
Best Uses
- Big Jobs
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
Went very well, easy to bend/form/flare
Pros
- Easy To Use
Cons
Best Uses
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
Dont forget to double flare your break line.
Pros
Cons
Best Uses
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
easy to bend
Pros
- Easy To Use
Cons
Best Uses
- Big Jobs
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
product was used to replace rear brake lines that had rusted out.worked well easy to bend easy to flare however dont really know about durability yet
Pros
- Durable
- Easy To Use
- Quality Materials
Cons
Best Uses
- Any Brake Line
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
Great product, I use it in my shop all the time and it lasts good.
Pros
- Easy To Use
Cons
- Poor Design
Best Uses
- Big Jobs
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
Should stay rust free longer than standard steel line. Would be nice to have longer coils available.
The plastic coating damages easily if not very careful forming, bending, and during installation.
Pros
- Easy To Use
- Good Design
- Quality Materials
Cons
Best Uses
- Big Jobs
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
I'm not a hack but I'm no pro either, especially when it comes to brakes. I hate doing brakes but this product was a piece of cake to work with. I'm sure if you hit the blogs in internet land you will come accross mention of Poly-Armour PVF Steel Brake Line. Believe them when they write it is easy to use. I wanted to avoid using couplers for my 1997 Mercurey Moutaineer brake line replacement job and decided to try out this product. The price was right and it bends easily. Easy to flare as well. Using a flare tool for 1st time didn't make a dfference as all went smoothly.
Pros
- Easy To Use
- Quality Materials
Cons
Best Uses
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
This brake line was very affordable and seems to be a durable product. I am sure it will last a long time. It was easily bent to shape to the original brake line.
Pros
- Durable
- Easy To Use
- Good Design
- Quality Materials
Cons
Best Uses
Comments about Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25':
As other reviewers pointed out, you need a flare tool to make your custom lines. Quick replacement to existing line on vehicle.
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
10 Questions | 10 Answers
Displaying questions 1-10
Q:
I have a break in my break line. do I still need a flaring tool to replace just the broken link?Asked on 5/24/2013 by kev from davidsonville, md0 answers(earn bonus points)
Q:
I need to replace the front brake lines on my 1998 Chevy K1500 pickup truck (4WD, extended cab, 6.5' bed, 5.7 Liter engine) and I'm not sure if this would be a good match or not?Asked on 5/23/2013 by Phil from Colchester, CT1 answer
CUSTOMER CARE
A:
The Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25' (Part No. PAC-325) is not an exact fit for your 1998 Chevrolet K1500 5.7L. The exact fit brake line for your vehicle is currently unavailable online. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 5/23/2013 by Steve from AAP
Q:
will this line fit a 1997 chevy s-10 pickup 4 wheel dr.?Asked on 5/6/2013 by will1 answer
CUSTOMER CARE
A:
This Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25' - Part No. PAC-325 should fit your 1997 Chevrolet S-10. However, this product is universal and not a direct fit. Some modifications may be required for proper installation. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 5/6/2013 by Morgan from AAP
Q:
i have a 88 supra and the brake pedal goes to the floor and has to be pumped to get any braking i was wondering if the lines were the problem and will this fit my supra?Asked on 1/30/2013 by Ed from milwaukee1 answer
CUSTOMER CARE
A:
The Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25' (Part No. PAC-325) is not an exact fit for your 1988 Toyota Supra. The exact fit brake line coil for your vehicle is currently unavailable online. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 1/30/2013 by Steve from AAP
Q:
Hi, do you have to remove the coating before you flare the end ? If so what is the best way to remove it so you don't damage the line .Asked on 1/5/2013 by Gary from nevada1 answer
CUSTOMER CARE
A:
No, there is no need to remove the coating in the Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25' - Part No. PAC-325 before you flare the end. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 1/7/2013 by John the Car-Doc from AAP
Q:
Would this line fit 2002 dodge dakota v-8 4wheel drive?Asked on 11/2/2012 by stargazer1 answer
CUSTOMER CARE
A:
Yes, this part Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25', Part No. PAC-325 fits your vehicle 2002 Dodge Dakota V-8 4 wheel drive.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 11/2/2012 by Aaron from AAP
Q:
How much is this?Asked on 10/31/2012 by allie from clarksburg,wv1 answer
CUSTOMER CARE
A:
Please note that price of the items can vary from zone to zone as our prices are zonal based. Once you enter your Zip Code into the Advance Auto Part’s website you will see the accurate price for the Poly-Armour PVF Steel Brake Line Coil - 3/16" x 25' (Part No. PAC-325). For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 10/31/2012 by Rick from AAP
Q:
with the 25 ft roll do you then have to flange the ends and buy the fitting ends form you as well? do you sell/rent flanging tools?Asked on 2/20/2010 by chad from wisconsin rapids, wi2 answers
A:
Yes, you would need to own or rent the flaring tool as well as a tubing cutter. You would also need the line nuts as well.Answered on 3/11/2010 by Ralph from Cleveland OhioA:
First I mean no disrespect with previous answer, however a TUBING CUTTER should not be used to cut this line (or any B-L) use fine toooth hack saw & de-burr in/outer edge (if needed. REASON : when flaring ends if tubing cutter used on steel tube flare; ESP double,bubble etc, find that tubing gets end crushed just enough that flare turns out off for proper fit / seal.Answered on 4/4/2010 by OGH From '70s from Mays Landing, NJ
Q:
how long is this roll of brake line?Asked on 10/23/2009 by Anonymous1 answer
CUSTOMER CARE
A:
I recommend contacting your local Advance Auto Parts store and seeing what they have in stock of that brake line and the lengths they have.Answered on 10/28/2009 by Mike from Advance Auto Parts
Q:
looking to replace front brake lines for a 86 cougar.Do you have preformed linesAsked on 10/15/2009 by brakeman from pekin illinois1 answer
CUSTOMER CARE
A:
No, we do not have preformed lines. You would have to buy straight lines and bend them into shape.Answered on 10/17/2009 by Paul from Advance Auto Parts
Displaying questions 1-10
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
