-
Your Store:
-
See if this part fits a specific vehicle.
| Container Size: | 17 oz |
| Container Type: | Steel |
| Refrigerant Type: | R134A, R12 |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
Most Liked Positive Review
Works as advertised
Simple to use after reading instructions on the can. Cleans hoses, evaporators and condensers by spraying the solution in, waiting a few minutes and then applying compressed air to flush the residue out.
Simple to use after reading instructions on the can. Cleans hoses, evaporators and condensers by spraying the solution in, waiting a few minutes and then applying compressed air to flush the residue out.
VS
Most Liked Negative Review
Seems to work but 1/3 of can is wasted
Seems to work with the long hose to get the solvent deep inside the hoses. Biggest problem is the pressurized can lost pressure when there was about 1/3 of solvent left in the can...Read complete review
Seems to work with the long hose to get the solvent deep inside the hoses. Biggest problem is the pressurized can lost pressure when there was about 1/3 of solvent left in the can. So it was 1/3 of a can wasted ($$$ lost!). I may have inverted the can and that may have caused the problem. But this should not have happened!
REVIEWS
Reviewed by 10 customers
Sort by
Displaying reviews 1-10
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Seems to work with the long hose to get the solvent deep inside the hoses. Biggest problem is the pressurized can lost pressure when there was about 1/3 of solvent left in the can. So it was 1/3 of a can wasted ($$$ lost!). I may have inverted the can and that may have caused the problem. But this should not have happened!
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Take a look at the screen on your orfice tube, and you will know why you need this.
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Although I think I pais for this stuff twick, it worked great!
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Works Great and Easy to Use
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Bought one can and had to go buy a second can to finish the system cleanout. Expensive. [...]
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
smells good, cleans well. use in a well ventilated area. makes great eye lubrication!!
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
did not do the job was left with monies wasted
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
This is the first time I used this product. I dont know if it did a good job or not. So without any noticeable results, its difficult to recommend this to anyone else.
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
Simple to use after reading instructions on the can. Cleans hoses, evaporators and condensers by spraying the solution in, waiting a few minutes and then applying compressed air to flush the residue out.
Pros
Cons
Best Uses
Comments about Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.):
The can has a very convenient rubber fitting on the end of the hose which makes flushing AC lines and hoses a breeze. Be sure you follow the flush blowing compressed air through the lines or you'll leave residue in the system.
Displaying reviews 1-10
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
What is the recommended method for blowing/flushing out the system after using this product? Are any special tools and/or adapters needed to perform this step?1 answer
CUSTOMER CARE
A:
This Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.) (Part No. CA-1) is for R-134a and R-12 auto A/C systems used to remove old oil and contaminants from A/C systems. Easy to use and fast-drying. It includes disposable dispensing hose, biodegradable and environmentally friendly, requires compressed air to complete flush. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
how do i use this product or where do i hook it u1 answer
CUSTOMER CARE
A:
This Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.) (Part No. CA-1) is for R-134a and R-12 auto A/C systems, used to remove old oil and contaminants from A/C systems, easy to use and fast-drying, includes disposable dispensing hose, biodegradable and environmentally friendly, requires compressed air to complete flush. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Q:
Does this product contain R141b? I need a R141b flush for the compressor warranty.1 answer
CUSTOMER CARE
A:
No, this Interdynamics Professional-Grade Aerosol Power Clean and Flush (17 oz.) with part# CA-1 is intended for R-134a and R-12 auto A/C systems.Q:
What is the recommended method for blowing/flushing out the system after using this product? Are any special tools and/or adapters needed to preform this step?1 answer
CUSTOMER CARE
A:
The recommended method for blowing/flushing out the system has been mailed to the mail address provided.Q:
how do i use this product or where do i hook it up1 answer
CUSTOMER CARE
A:
We request you to contact your local Advance Auto Parts store to purchase a Haynes Repair Manual for your vehicle or if you could please call us at 1-877-ADVANCE (238-2623).Q:
if you hook this up to the charge side how do you flush it out with air to complete the job. it seems you have to unhook something to blow out debris.1 answer
CUSTOMER CARE
A:
Here is something that will help assist in what your trying to do. http://www.autoacsystems.com/_faqs/3tiplist.htmlQ:
i'm trying to figure out how this works. wouldn't you need to drain the system first?1 answer
CUSTOMER CARE
A:
Yes, I believe that you will need to evacuate the system first.Q:
I have an air compressor, do I just hook that up to blow compressed air through the lines? If so how do I go about doing that?1 answer
CUSTOMER CARE
A:
You do not need an air compressor for this flush.Q:
If I am replacing several AC system parts, Rec/drier, expansion valve, etc., do I use this flush first with the old parts on the system?1 answer
CUSTOMER CARE
A:
Yes, I would use this first, and then replace all the parts to ensure that the tubing is all clean.Q:
do i install this to same area where i recharge my a/c1 answer
CUSTOMER CARE
A:
Yes, this should install through the same connections where you recharge your A/C system.