-
Your Store:
-
Hover over the image to zoom in
NTK Oxygen Sensor
See if this part fits a specific vehicle.
NTK Oxygen Sensors meet OE specifications for form, fit and function and have a direct-fit, OEM-style connector for installation.
Back To Top
| Connector Type: | OE Type |
| Exact Fit: | Yes |
| Heated: | Yes |
| Length (Sealing Surface To End Of Connector): | 15.5 in |
| O.E.M. Number: | AJ0418861B |
| Thread Size: | 18 mm |
| Wire Quantity: | 4 |
REVIEW SNAPSHOT®
by PowerReviewsNTKOxygen Sensor
(based on 4 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Was this a gift?:
- No (3)
REVIEWS
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
- Durable
- OEM replacement
Cons
- None
Best Uses
- Ford Flex Fuel Engine
Comments about NTK Oxygen Sensor:
Actual OEM direct replacement part. Save money over Motorcraft labeled box with NTK part inside. Do not install different brand part as it will fail within 1 year. Get the job done right the first time and be done with it - install NTK. First set of NTK's lasted 110,000 miles.
- Was this a gift?:
- No
Bottom Line Yes, I would recommend this to a friend
Images shared by Winslow
Fit it Right the First Time
Was this review helpful? Yes / No
- You may also flag this review
Pros
- Exact fit
Cons
- POOR INSTRUCTIONS
Best Uses
Comments about NTK Oxygen Sensor:
Instructions speak to 2 model numbers and give 2 much different torque values, however, you cannot discern which model you have looking at the part or packing material. otherwise great fit, even includes anti-seize, but you don't find that
out until you open the package either.
- Was this a gift?:
- No
Pros
- No more MIL
Cons
Best Uses
Comments about NTK Oxygen Sensor:
could use more anti-seize on the threads
- Was this a gift?:
- No
Comments about NTK Oxygen Sensor:
no # to tell me which one i have. two ways to install,torque that is.
Displaying reviews 1-4
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
6 Questions | 7 Answers
Displaying questions 1-6
Q:
Your site doesn't say whether this sensor is for before catalytic converter, or after, or both. Please describe.Asked on 12/3/2011 by Bob S from Florida1 answer
CUSTOMER CARE
A:
This NTK Oxygen Sensor (Part No. 22060) fits for front pre-cat or left front pre-cat or right front pre-cat depending upon your year, make, model and engine size of the vehicle.Answered on 12/4/2011 by Dennis from AAP
Q:
do i have a m18,or m12,two ways to install,torque that isAsked on 9/3/2011 by verner from cumming,ga2 answers
A:
says 18 mm thread that must be what they mean for the tighteningAnswered on 4/17/2013 by cj from Fort Collins, COCUSTOMER CARE
A:
To help you in a better manner, Please be more specific on your query.Answered on 9/5/2011 by Aaron from AAP
Q:
The 2007 SHELBY GT500 has four sensors, with sensors located upstream and down stream on each of two Catalytic Converters. Some of the specifications state sensors are either up stream or downstream designs. The question is are all four sensors the same part or is there actually a difference requiring each type to be specifically installed behind or ahead of a Catalytic Converter as implied by the descriptions given?Asked on 5/17/2011 by mouser from Oregon1 answer
CUSTOMER CARE
A:
The part numbers for the oxygen sensors differs for both the upstream and downstream oxygen sensors. The exact oxygen sensors has to be located for both the before catalyst and after catalyst oxygen sensors.Answered on 5/18/2011 by DIY Daniel from AAP
Q:
how ofton should you change them...thanksAsked on 3/22/2011 by Anonymous from moneta,va.1 answer
CUSTOMER CARE
A:
Once the vehicle reaches 60,000 miles, it is recommended to replace the oxygen sensors.Answered on 3/23/2011 by Parts Guru Geo from AAP
Q:
how close to the exhaust tip is the sensor locatedAsked on 3/4/2011 by Anonymous1 answer
CUSTOMER CARE
A:
The oxygen sensor is usually located in the exhaust manifold. One end of the oxygen sensor detects the levels of unburned combustibles in the exhaust flow, and the other end connects to wiring that relays the information to the computer.Answered on 5/9/2011 by Just Ask Jacob! from AAP
Q:
IS THIS SENSOR LOCATED ON THE EXHAUST PIPE. IF SO, APPROXIMATELY WHERE. AND THE WRENCH SIZE NEEDED TO REMOVE THE OLD AND REPLACE THE NEW.Asked on 4/7/2010 by Anonymous from HARLINGEN,TEX.1 answer
CUSTOMER CARE
A:
Yes, this sensor will be mounted on the exhaust. They make a special socket designed specifically for oxygen sensors that should be available at your local Advance Auto Parts store.Answered on 5/5/2010 by Mike from AAP
Displaying questions 1-6
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
