-
Your Store:
-
Hover over the image to zoom in
BWD Engine Oil Pressure Switch
See if this part fits a specific vehicle.
BWD oil pressure switches are manufactured to meet or exceed OE performance.
Back To Top
| Connector Gender: | Female |
| Terminal Gender: | Male |
REVIEW SNAPSHOT®
by PowerReviewsBWDOil Pressure Switch
(based on 9 reviews)
Ratings Distribution
75%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
Cons
Best Uses
- Was this a gift?:
- No (8)
REVIEWS
Reviewed by 9 customers
Sort by
Displaying reviews 1-9
Pros
- Durable
- Easy To Use
- Good Design
Cons
Best Uses
- SUV
Comments about BWD Oil Pressure Switch:
I was ready to scrap my Jeep 4.0 L with 216k miles, however, the low oil pressure indication on my dash oil gauge was fully rectified by installing a replacement oil pressure sender.
- Was this a gift?:
- No
Pros
- Easy to replace
- Exact fit
Cons
Best Uses
Comments about BWD Oil Pressure Switch:
Great OEM replacement part and easy to replace on my 2000 Jeep Cherokee. Will require a 1 1/16" deep socket. Replaced part and oil pressure gauge was back in service, no more worries?
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
- Incompatible
Best Uses
- None
Comments about BWD Oil Pressure Switch:
did not work. Replaced with another one and still didn't work had to replace with oe sending unit from jeep dealer that one
worked fine.
- Was this a gift?:
- No
Pros
- Easy To Use
- Good Fit
Cons
Best Uses
- JEEP
Comments about BWD Oil Pressure Switch:
Changed the oil in my jeep one day and the next the gauge was pegged at 80psi. Replaced the switch in about 10 mins and cranked it up and the gauge read normal. Easy Fix.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Oil Pressure Switch:
Easy replacement that fixed my problem
- Car & Truck:
- Auto Enthusiast
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about BWD Oil Pressure Switch:
15 minute install, 2000 Jeep Grand Cherokee
- Was this a gift?:
- No
Pros
Cons
Best Uses
- Small Cars
Comments about BWD Oil Pressure Switch:
I put this switch in, but the oil pressure still showed low (light on) when engine is hot and idling. No any label on this switch which makes me wonder the quality. My older switch has label (product # and maker). Maybe spray off the old one (1yr), it might still work. Anyway, the low oil pressure may be due to some other reason. I will likely get the dealer parts to see if it is working before I do bigger job on the engine. Also a mechanical gauge will be applied.
- Car & Truck:
- Casual Driver
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD Oil Pressure Switch:
Worked great on a 02 Jeep Liberty with 3.7L and oil light. Light used to come on while idling but this fixed the problem.
- Car & Truck:
- Casual Driver
- Was this a gift?:
- No
Pros
- Exact fit
- Good quality
- Solved problem
Cons
- None
Best Uses
- A Jeep 6 cylinder engine
Comments about BWD Oil Pressure Switch:
My oil pressure gauge went from 40 psi to 80 psi overnight. After cleaning and checking the connector I decided to replace the sending unit. Problem solved.
- Car & Truck:
- Auto Enthusiast
Displaying reviews 1-9
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
5 Questions | 6 Answers
Displaying questions 1-5
Q:
oil pressure guage stays at 80 , do I need a new switchAsked on 11/22/2011 by Anonymous1 answer
CUSTOMER CARE
A:
If your oil pressure is remaining that high, I would suggest having it checked with a manual pressure gauge to see if the reading is accurate. It sounds to me as if you might have a bad oil sending unit. If the oil pressure sending unit is good, check the oil pressure relief valve. It may be stuck closed resulting in high pressure reading.Answered on 11/22/2011 by Vincent from AAP
Q:
Where exactly is the Oil Pressure Switch located on my 2001 Jeep Grand Cherokee Laredo? What special tool(s) are needed to R&R the switch?Asked on 3/9/2011 by Lee from Independence, MO1 answer
CUSTOMER CARE
A:
The oil pressure switch is usually located on the engine block, often near the oil filter.Answered on 3/11/2011 by Parts Guru Geo from AAP
Q:
where is unit on the EngineAsked on 3/2/2011 by Anonymous1 answer
CUSTOMER CARE
A:
The oil pressure sensor is located on the rear of the engine and to the rear of the intake manifold.Answered on 5/10/2011 by Just Ask Jacob! from AAP
Q:
I came to a stoplight and noticed my check gauges light was on. I then noticed my oil pressure gauge was a 0 when I started driving it went back up to normal. It continued to do this so i shut it down and an hour later i checked it again and it worked fine. Any one have this issue before. 99 jeep grand cherokee laredo, 4.0Asked on 11/3/2010 by Big V from Ft. eustis, Virginia2 answers
CUSTOMER CARE
A:
This could be the cause of your issues, but unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. We highly recommend taking your vehicle to a reputable shop to have them take a look at it to determine the cause.Answered on 11/3/2010 by AnonymousA:
exact same issue. The oil pump is working best I can tell so everything points to this. Others have commented similarly so I am replacing it and observing.Answered on 3/14/2011 by bajohnson1 from baltimore md
Q:
will this make my oil light come on ?Asked on 1/23/2010 by Anonymous1 answer
A:
Check out this forum site. Sounds like I was having the same problem with my oil pressure light coming on after the engine warmed up. I hope this will help you...
http://forums.automotive.com/70/6345637/engine/jeep-grand-cherokee-engine-oil-pressure/index.htmlAnswered on 2/21/2010 by Smitty from Newark, Ohio
Displaying questions 1-5
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
