-
Your Store:
-
Hover over the image to zoom in
Felpro Intake Manifold Gasket Set
See if this part fits a specific vehicle.
From the leader in aftermarket engine sealing, FEL-PRO the gaskets professionals trust.
Product Features:
Back To Top
Product Features:
- Each gasket, set, or seal is built to meet or exceed all original equipment specifications and is validated for fit, form, and function
- Application specific design to ensure a perfect fit and correct operation for unsurpassed quality that you can trust
- FEL-PRO gasket sets are engineered and manufactured specifically for the aftermarket repair environment
- Every part for the repair procedure is included in the kit unless otherwise noted
| Intake Gasket Material: | Rubber / Steel |
| Quantity Of Pieces: | 20 |
REVIEW SNAPSHOT®
by PowerReviewsFelproIntake Manifold Gasket Set
(based on 10 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Durable (6)
- Easy to install (6)
Cons
Best Uses
- Everyday driving (9)
- Replacement (7)
- Reviewer Profile:
- Casual driver (6), Mechanic (6), Auto enthusiast (4)
REVIEWS
Reviewed by 10 customers
Sort by
Displaying reviews 1-10
Pros
- Durable
- Easy To Install
- Much better than OEM
Cons
- No cons here
Best Uses
- Everyday Driving
Comments about Felpro Intake Manifold Gasket Set:
I orered the parts required to replace the intake manifold and valve covers to do a complet job online. It saves time to make your list and get everthing all at once. No mistaks with the order!
Pros
- Exact fit
Cons
- Poor Instructions
Best Uses
- Replacement
- Restoration
Comments about Felpro Intake Manifold Gasket Set:
Installed this kit in a 2000 Pontiac Grand Prix GT, 3800. Install went just fine, but the only instruction included was a note on when and where and how much to apply, when it came to the black RTV. OK. I knew where almost everything went in this kit. I had no idea what the small blue rubber socket went to and I had no use for the smaller end rubber gaskets (must be for another vehicle). I wish it came with the gasket for the machining end of the lower intake... I must have received a newer version of this kit. I read some reviews stating that it didn't come with lower injector O-rings. Mine did. Upper and lower. I didn't feel like taking the chance of breaking an injector, so I didn't replace the uppers. All in all, good kit. Good quality. I always go Fel-pro when it's an option. FYI: Make sure you get the replacement bypass tubes that go into the tensioner pulley bracket. Both of mine broke on teardown...
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Felpro Intake Manifold Gasket Set:
was consuming antifreeze from factory gaskets ate up from Dexacool car only has 51k miles
Pros
- Easy To Install
Cons
- No Bypass Elbows
Best Uses
- Everyday Driving
- Replacement
Comments about Felpro Intake Manifold Gasket Set:
comes with almost everything to complete job but the bypass elbows
Pros
- Durable
- Easy To Install
- Everything needed their
- Lightweight
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Felpro Intake Manifold Gasket Set:
n/a
Pros
- Durable
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Felpro Intake Manifold Gasket Set:
The blue part doesn't fit anywhere .. . also the o rings for the injectors are for the uppers, NOT the lowers I broke an injector this way. The gasket is a great product and works well I just wish the instructions were better and they included a lower set of O rings as those are the ones that really need replacing.
Pros
- Best gasket
- Durable
- Easy To Install
Cons
- none
Best Uses
- Everyday Driving
- Performance Driving
- Racing
- Replacement
- Restoration
Comments about Felpro Intake Manifold Gasket Set:
Don't try to save money and get the cheaper "OEM" gasket, get this new style that is MUCH improved and you will be glad you spent the extra money, absolutely no leaks if they are installed correctly
Pros
- Durable
- Made to last heavy duty
Cons
- Wrong injector
Best Uses
- Everyday Driving
- Long lasting
- Replacement
Comments about Felpro Intake Manifold Gasket Set:
Came with 6 upper injector "O" rings, but it should have come with the lowers - I had to buy them later.
Pros
Cons
Best Uses
- Everyday Driving
Comments about Felpro Intake Manifold Gasket Set:
So far thing have been doing well other than not having part when i got there. Not on this order.
- Car & Truck:
- Auto Enthusiast, Truck Enthusiast
Pros
- Durable
- Easy To Install
- Upgraded gasket design
Cons
- No Cons to this product
Best Uses
- Everyday Driving
- Performance Driving
- Replacement
Comments about Felpro Intake Manifold Gasket Set:
This is a much improved gasket over the Factory gasket and should have a longer life that the stock gasket .
- Car & Truck:
- Mechanic
Displaying reviews 1-10
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
14 Questions | 16 Answers
Displaying questions 1-10Previous | Next »
Q:
Does this kit come with the supercharger gasket needed since you must remove the s/c to get the intake off? Also, does Advance sell the lower fuel injector o-rings and if so, what is the part number? Almost forgot but does it come with a throttle body gasket?
Asking these questions for a 98 Pontiac GTP GrandprixAsked on 3/26/2013 by dP1 answer
CUSTOMER CARE
A:
This Felpro Intake Manifold Gasket Set - part# MS 98014 T is an exact fit for your 1998 Pontiac Grand Prix GTP which includes lower set only with rubber-plastic end seals, locating pins and intake manifold gaskets. Please check the Felpro Fuel Injector O-Ring Set - part# ES 70599 which is an exact fit for your vehicle. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/27/2013 by Vincent from AAP
Q:
where do the blue side pieces go?
also what is the intake torques spec? for a 2005 grand prix gtp
superchanged 3800Asked on 1/18/2013 by mason from indiana1 answer
CUSTOMER CARE
A:
WIth reference to your inquiry on the Felpro Intake Manifold Gasket Set - part# MS 98014 T, the blue piece is a supplemental gasket if needed to fill in any spaces on the front or rear of the intake gasket. For your Grand Prix GTP, the torque specifications are: lower intake manifold bolt - 15 Nm (11 ft. lbs.) and upper intake manifold bolt (VIN K) - 10 Nm (89 inch lbs.). For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 1/18/2013 by Vincent from AAP
Q:
does this gasket set use stock torque spec or is there a new torque spec? The upgraded gasket set for the 3.1 had a new torque spec.Asked on 5/7/2012 by Anonymous1 answer
CUSTOMER CARE
A:
We will need more information including the year, make, model, and engine size of your application before we can make a suggestion.
For any further assistance please feel free to call 1-877-238-2623 and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 5/10/2012 by Aaron from AAP
Q:
Hi. I purchased this gasket set from Advanced Auto Parts for my 1999 Pontiac Firebird, Engine Code K. There are several pieces in the kit that I do not know what to do with. There are 5 O-Rings in varying sizes (the top row in the picture of the product), none of which do I know where they go... along with a small blue circular piece of plastic and a gasket for what looks like a thermostat housing. I also received a set of light blue lower intake manifold gasket seals (front and back) that I do not believe go to my car. Are these just extra pieces that are included, because this manifold set can be used for a variety of makes and models or do I just not know where they go? There was no instruction manual included with the product. Thank You.Asked on 12/26/2011 by Doug from St. Augustine, Florida1 answer
CUSTOMER CARE
A:
This Felpro Intake Manifold Gasket Set(Part No. MS 98014 T) is applicable on selective Buick, Chevrolet, Oldsmobile and Pontiac vehicles. So the O-rings are offered in surplus depending on different types of vehicles. You can ignore the O-rings if its really not needed in your vehicle.Answered on 12/30/2011 by John the Car-Doc from AAP
Q:
Are the light blue side peices needed...2003 pontiac grand prix?Asked on 12/20/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, it is the complete set of two Lower Intake Manifold Gaskets.These are High quality OE replacement intake manifold gaskets.Answered on 12/21/2011 by DIY Daniel from AAP
Q:
Is the smaller of the two black o-rings for the heater hose bypass fitting?
Are the two sets of end gaskets for two different models?Asked on 11/14/2011 by Anonymous1 answer
CUSTOMER CARE
A:
This gasket set is engineered and manufactured specifically for the repair. Every part for the repair is included and indicated on the package label. In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle.Answered on 11/15/2011 by Vincent from AAP
Q:
Just want to confirm that this set includes the fuel injector o-rings?Asked on 7/18/2011 by Anonymous1 answer
CUSTOMER CARE
A:
Yes, this set includes o- rings for injectors.Answered on 7/19/2011 by Vincent from AAP
Q:
2000 buick century 3.1 engine these gaskets dont seem rightAsked on 2/22/2011 by skip from buffalo ny1 answer
CUSTOMER CARE
A:
No, these gaskets will not fit for your vehicle.Answered on 2/23/2011 by Parts Guru Geo from AAP
Q:
I have noticed that this gasket set is metal instead of plastic like the original! Should I use a gasket sealer on this gasket set & if so, what type?Asked on 11/12/2010 by Le from New Iberia, La.1 answer
CUSTOMER CARE
A:
Do not use sealer on metal gaskets. It is not needed.Answered on 1/13/2011 by Mike the Auto Parts Master from AAP
Q:
does this set include gaskets for the upper and lower intake manifold?Asked on 10/28/2010 by Anonymous2 answers
CUSTOMER CARE
A:
No. This is just for the lower intake.Answered on 10/28/2010 by Kevin the King of Auto Parts. from AAPA:
Nope, you have to buy the intake plenum gaskets seperateAnswered on 3/3/2011 by Wildjoker from Farmington, NM
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
