-
Your Store:
-
Hover over the image to zoom in
ToughOne or Ready-Aire Heater Core
See if this part fits a specific vehicle.
Our heaters are designed and tested to meet or exceed OE specifications for form, fit, and function. Using premium quality materials and a clear focus on the highest heat transfer performance possible, our engineers have designed this heater to perform at the highest standards to ensure a warm cab environment during those cold winter months.
Back To Top
| Core Height: | 7 1/8 in |
| Core Thickness: | 2 in |
| Core Width: | 7 3/4 in |
| Inlet Size(s): | 5/8 in |
| Outlet Size(s): | 5/8 in |
REVIEW SNAPSHOT®
by PowerReviewsReady-AireHeater Core
(based on 14 reviews)
Ratings Distribution
93%
of respondents would recommend this to a friend.
Pros
- Easy to install (4)
Cons
- Difficult to install (3)
Best Uses
- Everyday driving (5)
- Replacement (5)
- Car & Truck:
- Mechanic (3)
- Reviewer Profile:
- Casual driver (3), Mechanic (3)
Most Liked Positive Review
Advance came through for me
In Colorado you have GOT to have heat in the car! I bought this low-mileage '98 Taurus knowing it needed attention in several areas including the lack of heat. Several heater core back flushes...Read complete review
In Colorado you have GOT to have heat in the car! I bought this low-mileage '98 Taurus knowing it needed attention in several areas including the lack of heat. Several heater core back flushes failed to aleviate the problem so I ordered a new core online receiving a nice discount. [...] The core slid in nicely and works perfectly. Even taking apart the dash and putting it back together wasn't as bad as I had expected. I am so very happy to have heat now as winter takes hold.
VS
Most Liked Negative Review
Hope it'll last...
I bought this heater core to replace the one in my 1999 Ford Taurus which is badly clogged. While it works, it is slightly smaller than the OEM one and thus it doesn't fit ...Read complete review
I bought this heater core to replace the one in my 1999 Ford Taurus which is badly clogged. While it works, it is slightly smaller than the OEM one and thus it doesn't fit tightly in the heater box. The built quality seems to be of lower quality too (thin metal, the tubes where the heater hoses connect to are bent very easily). It shows no problem yet after a week, and hopefully it'll out last the car.
REVIEWS
Reviewed by 14 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Durable
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Ready-Aire Heater Core:
Works just like it should. We've got hot air!!
Pros
Cons
- Difficult To Install
Best Uses
Comments about Ready-Aire Heater Core:
not cold anymore.
Pros
Cons
Best Uses
- Replacement
Comments about Ready-Aire Heater Core:
I haven,t had time to install this item. I,m in the middle of settling my late Dad,s estate. May be awhile before I,ll have time to tackle this project. Will let you know when I get it replaced
Pros
- Lightweight
Cons
- No Improvement In Performance
Best Uses
- Everyday Driving
Comments about Ready-Aire Heater Core:
Works ok.
Pros
Cons
- Difficult To Install
Best Uses
Comments about Ready-Aire Heater Core:
My wife was happy to finally have her heat back.
Pros
- Easy To Install
Cons
- Lower quality than OEM
- Slightly smaller than OEM
Best Uses
- Replacement
Comments about Ready-Aire Heater Core:
I bought this heater core to replace the one in my 1999 Ford Taurus which is badly clogged. While it works, it is slightly smaller than the OEM one and thus it doesn't fit tightly in the heater box. The built quality seems to be of lower quality too (thin metal, the tubes where the heater hoses connect to are bent very easily). It shows no problem yet after a week, and hopefully it'll out last the car.
Pros
- Durable
Cons
Best Uses
- Everyday Driving
Comments about Ready-Aire Heater Core:
great
Pros
- Lightweight
- Produces LOTS of heat
Cons
- Fit was a little loose
Best Uses
- Everyday Driving
Comments about Ready-Aire Heater Core:
Good price, produces lots of heat, but did not include enough foam to surround core, and replacement core did not fit snug in core box (a little loose/not bad though).
Pros
Cons
Best Uses
- Replacement
Comments about Ready-Aire Heater Core:
Mechanic installed. Working great so far.
- Car & Truck:
- Casual Driver
Pros
- None
Cons
- Difficult To Install
- No Improvement In Performance
Best Uses
- None
Comments about Ready-Aire Heater Core:
stopped working after 2 days system was flushed after removal of old core, Store trouble to return
- Car & Truck:
- Mechanic
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
4 Questions | 9 Answers
Displaying questions 1-4
Q:
how do i get instructions for replacing this partAsked on 11/29/2010 by al from saint louis mo2 answers
VERIFIED BUYER
A:
I use a Haynes repair manual for my '98 Taurus but, in the case of this heater core replacement, many of the steps were not needed. Disconnect the battery as the airbags could otherwise go off. Drain the cooling system. Remove the lower air component cover-right side under dash-then the blend door actuator and heater core cover and gasket to see the core itself. In the engine compartment, back the two heater hose clamps off the core connects at the firewall. Pop off the 2 side trim covers on either side of the dash and remove the two heavy bolts under each. Remove the vent cover on top of the dash and the three bolts under it. Unhook the steering column under the dash. Put a little weight on the steering wheel to loosen the dash from its mountings (be careful not to pull too hard). Here's where you need a friend or a brace: lift the steering wheel just enough for the old heater core to be pulled out (have a plastic bag ready to catch fluid). Slide in the new core and reverse all steps.Answered on 12/21/2010 by Footer from Arvada, COCUSTOMER CARE
A:
For help with your project, I recommend getting a repair manual specifically for your vehicle. It should be able to help you with detailed instructions on how to do many things.Answered on 11/30/2010 by Mike the Auto Parts Master from AAP
Q:
Is it necessary to pull out the dash inside as well as go thru the firewall to replace? What other products must be purchased to replace this core.Asked on 10/21/2010 by Anonymous from Stanfield,NC3 answers
CUSTOMER CARE
A:
Yes on some vehicles you do have to pull out the dashboard. For step by step instructions i recommend that you go to your nearest Advance Auto Parts store and purchase a repair manual.Answered on 10/21/2010 by Kevin the King of Auto Parts. from AAPA:
where is the core locatedAnswered on 11/4/2010 by ken from louisvilleA:
Hi everybody,
watch the video, you don't have to remove the whole dash,
just remove the bolts on the side access panels and then
the 8 screws from the top vents, gently lift up and out about
4" and you're good to go. the video shows the easy way.
http://www.youtube.com/watch?v=LsZoFoiJsdwAnswered on 11/11/2010 by james27613 from Raleigh, NC RTP
Q:
I have a 1999 merc sable. When i use my air (and sometimes even without air)and come to a stop light my temp gauge goes up to hot side. I have to shut air down and put engine in neutral and rev engine to make temp go down. I had my radiator flushed not long ago. I was told my heater core could be restrected from a good water flo. Please let me know if that sounds wright. I just changed my thermostate a few days ago.Asked on 8/1/2010 by birdman from hammond. IN2 answers
CUSTOMER CARE
A:
A bad heater core could cause that.Answered on 8/2/2010 by Mike from AAPA:
i was having trouble with my 98 taurus and i replaced the thermostat, the water pump and the belt tensioner because thats what i thought was wrong with it, but it turned out to be just the coolant reservoir cap was bad. i replaced it and have had no trouble out of it yetAnswered on 10/3/2011 by earl from Bainbridge, Ga
Q:
how long coes it take to replaceAsked on 12/27/2009 by Anonymous2 answers
VERIFIED BUYER
A:
Its not a repair for a Back yard mechanic.
chiltons/ mitchell time is approx 5-7 hours.Answered on 7/28/2010 by Travis P from Ligonier PaCUSTOMER CARE
A:
Depends on the vehicle and the person doing it. Could take a couple of hours or it could take a day or two. A skilled mechanic should be able to replace one in a few hours.Answered on 12/28/2009 by Mike from Advance Auto Parts
Displaying questions 1-4
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
