-
Your Store:
-
Hover over the image to zoom in
Airtex Fuel Pump Module Assembly
See if this part fits a specific vehicle.
Airtex fuel pump modules offer OEM or better performance from an Original Equipment Supplier. The latest advancements in fuel delivery technology are built-in to every Airtex Fuel Pump to deliver greater reliability.
Product Features:
Back To Top
Product Features:
- Every single pump is 100% tested throughout the entire manufacturing process for worry free, out-of-the-box performance
- Triple barb hose fitting provides superior, long-lasting seal
- Superior return porting for optimum fuel flow
- Enhanced pump to flange harness design provides worry-free electrical performance
- Ceramic sender card and float arm that utilizes vehicle-specific geometry to ensure accurate fuel gauge readings for each and every application
- Gradient density, dual zone filtration designed for better contamination resistance
| Fuel Type(s): | Gas |
| Pressure Rating: | 70-90 PSI |
REVIEW SNAPSHOT®
by PowerReviewsAirtexFuel Pump Module Assembly
(based on 26 reviews)
Ratings Distribution
81%
of respondents would recommend this to a friend.
Pros
- Easy to use (14)
- Lightweight (4)
Cons
Best Uses
- Trucks (12)
- SUV (3)
- Car & Truck:
- Mechanic (4), Casual driver (3)
- Reviewer Profile:
- Casual driver (7), Mechanic (3)
- Was this a gift?:
- No (15)
Most Liked Positive Review
Works OK
Unit fit like original, with the exception of the wire harness, needing to be spliced in. Have since taken 1 roadtrip, and found out the float not accurate. Low fuel light did not...Read complete review
Unit fit like original, with the exception of the wire harness, needing to be spliced in. Have since taken 1 roadtrip, and found out the float not accurate. Low fuel light did not come on until gauge was reading below 1/8 of a tank. Original unit set light off at about 1/4 of a tank. Will have to watch the trip odometer closely.
VS
Most Liked Negative Review
Works great, took some work to fit it.
Tested it out of the box, and it fired right up. Install was a little tricky, GM changed wiring harness (new one included); had to do a little splicing. The position tab...Read complete review
Tested it out of the box, and it fired right up. Install was a little tricky, GM changed wiring harness (new one included); had to do a little splicing. The position tab on the pump was a little bigger than the original, but nothing a little shave with a razor blade couldn't fix :) Drive on!
REVIEWS
Reviewed by 26 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Went Into Tank Just Fine
Cons
- None
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
I purchased this pump, then had a friend do the installation, every thing went great..
- Was this a gift?:
- No
Pros
- It works
Cons
- Rewiring Needed
Best Uses
- SUV
Comments about Airtex Fuel Pump Module Assembly:
The fuel pump was the correct one for my vehicle. All I had to do was drop the tank and install the new pump. I did have to rewire the plug for the new improved plug connection.
- Was this a gift?:
- No
Pros
- Exact match
Cons
Best Uses
Comments about Airtex Fuel Pump Module Assembly:
Easy to install once fuel tank was removed
- Was this a gift?:
- No
Pros
- Met My Need
Cons
Best Uses
- SUV
Comments about Airtex Fuel Pump Module Assembly:
thanks for having this pump readily available and giving the online discount in the store when we picked up the pump
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about Airtex Fuel Pump Module Assembly:
good product, fuel gauge not accurate, have only had it installed about 2 months, good so far
- Was this a gift?:
- No
Pros
- Cost less than OEM
Cons
- Short part life
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
Original pump quit after 6 yrs. It worked for an hour then quit for 15 min or so. Airtex pump was 1/2 the price of OEM. It last me for about 2 yrs then quit with no warning. Trucks getting old so put another airtex pump on and it. It lasted me about 2 years then truck would not start cold, low pressure. I'm thinking of replacing the truck in about a year. One more airtex pump and the fuel gauge goes out after a year, 3 weeks later pump quits. I'm replacing the truck soon so it got one more Airtex pump. Moral is I would have saved a lot of money and a bunch of agravation w/ an OEM pump when the factory one went out.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
- Difficult To Use
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
this will be 3 one i have had 2 one gave me repasmit 3 i have buy agen now 3 shop fees i have pay for 1st time [$] 2th time [$] now 3 th time [$] plus got buy new part agen i am thing autozone looking real good my bizz spends alot $$$$$ advance now going thing more abot buy from them
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- Lightweight
Cons
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
Its a fuel pump it worked after I got the correct one. nothing more to say.
- Was this a gift?:
- No
Pros
- Easy To Use
- Lightweight
Cons
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
So far no problems..
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
- Incompatible
Best Uses
- Trucks
Comments about Airtex Fuel Pump Module Assembly:
good fuel pump i will buy again recommend to my friend the next time i need a fuel pump i will choose airtex
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
3 Questions | 5 Answers
Displaying questions 1-3
Q:
i put a new fuel pump in and my 98 blazer start and run then u start to drive then u give it gas the it stops running then you ccan start it right back up and it will do the same what is itAsked on 12/2/2011 by johnny from clare mi1 answer
CUSTOMER CARE
A:
It could be a number of things causing this. Unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. We highly recommend taking your vehicle to a reputable shop to have them take a look at it to determine the cause.Answered on 12/2/2011 by Steve from AAP
Q:
what is the easiest way to check that the pump is working without dropping the gas tankAsked on 6/16/2011 by david g from summerville, SC1 answer
CUSTOMER CARE
A:
Check the pressure against what is specified in your manual. Generally, a vehicle needs between 30 and 80 psi in order to run smoothly, but your vehicle may be different. If you pressure matches what is the manual, then your fuel pump is working correctly.Answered on 6/23/2011 by Vincent from AAP
Q:
will this unit fix fluctuating gas guage?Asked on 8/15/2010 by Anonymous3 answers
VERIFIED BUYER
A:
It may not be necessary. Issue with the gauge is most likely an electrical issue. Still need to drop the tank to check the lead so if you have alot of miles on the vehicle, it might be a good preventitive step to replace the module. It is a $250 part, though, so that's pretty expensive prevention.Answered on 11/9/2010 by TS from MICUSTOMER CARE
A:
It may fix that problem.Answered on 8/16/2010 by Mike from AAP
Displaying questions 1-3
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
