-
Your Store:
-
Hover over the image to zoom in
Sunpro Fuel Lever Sender
Fit of this part varies by vehicle & equipment specs
For use with fuel level gauges and 5" - 26" deep tanks. Includes gasket and mounting hardware. Resistance specifications: Empty: 240 ohms. 1/2: 130 ohms. Full: 33 ohms.
Back To Top
| Type of Gauge: | Analog |
| Height (inches): | 16.5 |
| Width (inches): | 3 |
REVIEW SNAPSHOT®
by PowerReviewsSunproFuel Lever Sender
(based on 6 reviews)
Ratings Distribution
60%
of respondents would recommend this to a friend.
Pros
- Functional (5)
- Easy to install (3)
Cons
Best Uses
- Restoration (3)
- Reviewer Profile:
- Auto enthusiast (3), Casual driver (3), Mechanic (3)
REVIEWS
Reviewed by 6 customers
Sort by
Displaying reviews 1-6
Pros
- Functional
Cons
Best Uses
- Restoration
Comments about Sunpro Fuel Lever Sender:
This product is the one I choose after using many others. I build rods and after spending more then double for this product at high end shops. I buy mine at advance. Remember to check the Ohms so that this product matches the Ohms of your fuel gauge. So that the two will work properly together.
Pros
- Easy To Install
- Functional
Cons
Best Uses
- Replacement
- Restoration
Comments about Sunpro Fuel Lever Sender:
Works great.
Pros
Cons
Best Uses
- Everyday Driving
Comments about Sunpro Fuel Lever Sender:
Part is most likely fine for it's intended vehicles.
Pros
- Easy To Install
- Functional
Cons
Best Uses
- Everyday Driving
Comments about Sunpro Fuel Lever Sender:
Universal fit, would fit the tank, didn't have to use the whole asembly - found my original float (Brass) would sink, used the float only and reinstalled the unit; it worked great.
Pros
- Attractive Design
- Easy To Install
- Functional
- Lightweight
Cons
Best Uses
- Replacement
- Restoration
Comments about Sunpro Fuel Lever Sender:
This part was extremely useful when my old unit failed on my 25 year old cj5 jeep i left the old fuel pick up in place and installed the level sender in the tank, and it in conjunction with the new fuel gauge worked just fine. this unit is not meant to replace the old fuel pick up and sensing unit it is just a fuel level sender and is mounted along with the fuel pickup.the originality unit had a much lower ohm reading of 10 full and 75 empty this unit needs 325 empty and 10 full
- Car & Truck:
- Mechanic
Pros
- Functional
Cons
- Difficult To Install
Best Uses
Comments about Sunpro Fuel Lever Sender:
The product is good and would be easy to install except that the plate that attaches it to the tank is made to be secured with screws. For my application (Ford Tank) the disk was too small for that. Ford uses a retaining ring that effectively clamps the plate over an o-ring. The plate had two problems, it was too small, making it difficult to center over the o-ring and the screw holes were inside the circumference of the seal. I had to make a shim to put over the inner side of the plate and seal it with RTV. Even after that long and arduous trial and error getting the lock ring in place and the sender positioned correctly was quite a chore.
Here are my suggestions: 1. offer multiple mounting plates 2. ship with a solid gasket designed to block the screw holes 3. offer a sending unit specifically for late '80's ford products.
Displaying reviews 1-6
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
48 Questions | 54 Answers
Displaying questions 1-10Previous | Next »
Q:
Will this work in a 2005 Mazda 3i? and do you have to lower the fuel tank? How easy or hard is it to do it yourself?Asked on 3/26/2013 by Twinie from Woodbridge, VA1 answer
CUSTOMER CARE
A:
This Sunpro Fuel Lever Sender (Part No. CP7583) is universal and not a direct fit for your 2005 Mazda 3 I. To lower the fuel tank depends on the skill level of whoever is removing or replacing the part. Some may have a harder time than others who have experience. However, we would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 3/26/2013 by Morgan from AAP
Q:
how do u mount it to the fuel tankAsked on 3/24/2013 by reble from lakeland1 answer
CUSTOMER CARE
A:
Please find the installation instructions for this Sunpro Fuel Lever Sender, Part No. CP7583 that has been sent to your email address.
For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/25/2013 by Aaron from AAP
Q:
Will this work in my 2005 Ford Escape?Asked on 1/8/2013 by escape from detroit, mi1 answer
CUSTOMER CARE
A:
This Sunpro Fuel Lever Sender - (Part No. CP7583) is not vehicle specific. It is for fuel level gauges that uses fuel tank measuring from 5" to 26" deep. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 1/8/2013 by Aaron from AAP
Q:
I need both the Gauge and tank sending units for my spare tank.
Do you have a package that will work for me?Asked on 11/25/2012 by xxxxxxxxxx from Boise, Idaho1 answer
CUSTOMER CARE
A:
To locate the exact Gauge and tank sending unit, please provide the year, make, model and engine size of your vehicle. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 11/25/2012 by Steve from AAP
Q:
Will this work on 2002 Impala Base 3.4L? Does it come with Basic instructions?Asked on 11/2/2012 by TEX from Johnston R.I1 answer
CUSTOMER CARE
A:
This part Sunpro Fuel Lever Sender, Part No. CP7583 is universal and not a direct fit for your vehicle 2002 Impala Base 3.4L. This is a one size fits most, slight modification may be required. Yes, it comes with instructions.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 11/2/2012 by Aaron from AAP
Q:
Will this replace the current Fuel Level Sender in my 1989 LTD Crown Victoria?Asked on 9/21/2012 by aaron from United States1 answer
CUSTOMER CARE
A:
This part Sunpro Fuel Lever Sender, Part No. CP7583 is universal and not a direct fit for your vehicle 1989 LTD Crown Victoria. This is a one size fits most, slight modification may be required.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 9/22/2012 by Aaron from AAP
Q:
will this fix my fuel guage on my 1989 LTD Crown VictoriaAsked on 9/21/2012 by aaron from United States1 answer
CUSTOMER CARE
A:
This part Sunpro Fuel Lever Sender, Part No. CP7583 is universal and not a direct fit for your vehicle 1989 LTD Crown Victoria. This is a one size fits most, slight modification may be required.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 9/22/2012 by Aaron from AAP
Q:
how does this part fit into a 2003 pathfinder SE 4x4......easy or complitcated through the back seat.....Asked on 6/8/2012 by sharky from phila,PA1 answer
CUSTOMER CARE
A:
This Sunpro Fuel Lever Sender (Part# CP7583) is not vehicle specific. It is for fuel level gauges that uses fuel tank measuring from 5" to 26" deep.Answered on 6/10/2012 by Dennis from AAP
Q:
Will this work to fix my fuel gauge on my 2000 ranger 3.0 liter flexfuelAsked on 5/31/2012 by Anonymous from windsor maine1 answer
CUSTOMER CARE
A:
This Sunpro Fuel Lever Sender with Part# CP7583 is not vehicle specific. It is for fuel level gauges that uses fuel tank measuring from 5" to 26" deep.Answered on 6/2/2012 by Steve from AAP
Q:
will it work on my 1994 Ford Ranger XLTAsked on 4/12/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This Sunpro Fuel Lever Sender with Part# CP7583 is not vehicle specific. It is for fuel level gauges that uses fuel tank measuring from 5" to 26" deep.Answered on 4/14/2012 by Dennis from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
