-
Your Store:
-
Hover over the image to zoom in
BWD Fuel Injector - MFI
See if this part fits a specific vehicle.
BWD flow-matched injectors promote smooth engine operation and balanced fuel delivery to help reduce overall fuel consumption and harmful emissions.
Back To Top
| Package Quantity: | 1 |
| Quantity Per Vehicle: | 1 |
REVIEW SNAPSHOT®
by PowerReviewsBWDFuel Injector - MFI
(based on 18 reviews)
Ratings Distribution
89%
of respondents would recommend this to a friend.
Pros
- Easy to install (12)
- Improves engine efficiency (12)
- Increases power (10)
Cons
- Difficult to install (4)
Best Uses
- Replacement (14)
- Everyday driving (13)
- Car & Truck:
- Mechanic (3)
- Reviewer Profile:
- Mechanic (7), Casual driver (5), Truck enthusiast (4), Auto enthusiast (3)
Most Liked Positive Review
I would buy this product
Had a misfire on #7 cylinder on a 1998 Chevy Z/71 with 5.7 ltr. vortec engine. Did a tune up to try to fix problem did not work. So replaced injecter poppet assemble...Read complete review
Had a misfire on #7 cylinder on a 1998 Chevy Z/71 with 5.7 ltr. vortec engine. Did a tune up to try to fix problem did not work. So replaced injecter poppet assemble with new up dated design. Truck runs good. Had a little trouble tring to route injecter line assembles to there specfic cylinders. Took an hour to perform repair.
VS
Most Liked Negative Review
POOR MPG now, not smooth,OK starts
Engine starts better. Engine now runs poorly on the highway and went from 15MPG to 10MPG. Looking to replace with a better product. Not looking forward to replacing this expensive item also about 4...Read complete review
Engine starts better. Engine now runs poorly on the highway and went from 15MPG to 10MPG. Looking to replace with a better product. Not looking forward to replacing this expensive item also about 4 hours to replace! I shoud have looked for a better quality one(Like OEM). The poor gas mialage now (33% increase in fuel consumption) is not what I expected from a description"helps reduce fuel consumption". Is this one defective? Will Advanced Auto Parts help?
REVIEWS
Reviewed by 18 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Install
Cons
- No Improvement In Performance
Best Uses
- Replacement
Comments about BWD Fuel Injector - MFI:
Went on easy took a few hours. I just take my time. No big hurry.
Pros
Cons
- Decreases Gas Mileage
- No Improvement In Performance
Best Uses
- Everyday Driving
- Replacement
Comments about BWD Fuel Injector - MFI:
Engine starts better. Gas milage went from 15mpg to 10mpg and engine runs rough at highway speeds.
Advertized to promote smooth engine operation and reduce fuel consumption. Did you sell a defective one to me? Who can I call about this online purchase? Please respond this is my second attempt to get some answers.HELP!
Pros
Cons
- Decreases Gas Mileage
- Engine Hesitates Now
Best Uses
- Everyday Driving
Comments about BWD Fuel Injector - MFI:
Engine starts better. Engine now runs poorly on the highway and went from 15MPG to 10MPG. Looking to replace with a better product. Not looking forward to replacing this expensive item also about 4 hours to replace! I shoud have looked for a better quality one(Like OEM). The poor gas mialage now (33% increase in fuel consumption) is not what I expected from a description"helps reduce fuel consumption". Is this one defective? Will Advanced Auto Parts help?
Pros
- Easy To Install
- Improves Engine Efficiency
- Increases Power
Cons
Best Uses
- Everyday Driving
- Performance Driving
- Replacement
- Restoration
Comments about BWD Fuel Injector - MFI:
i thought my tahoe had bit the dust . trouble code after trouble code , multi misfire,o2 sensor , rough idle , backfire,poor milage , you name it my truck had it . took a chance on BWD injectors and man am I glad i did !! I cant remember if it ever ran this good and took care of all the trouble codes . my dash looks odd now not having a blinking check engine light,but I can get used to that. do yourself a favor and update from CSFI to MPI if you dont want to buy a new ride . my tahoe is a 96 5.7 4x4 with 254000 miles on it and am hopeing to get at least another 100000 out of it now .
Pros
- Durable
- Improves Engine Efficiency
- Increases Power
Cons
- Difficult To Install
Best Uses
- Everyday Driving
- Replacement
Comments about BWD Fuel Injector - MFI:
I'm still seeing how the product works because I just put the product in the truck.
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about BWD Fuel Injector - MFI:
Took a long time to crank.would fire up for a few seconds then die.threw codes for misfires,burning rich and high ignition voltage.light is off and cranks fine after installation.seems to be the fix.
Pros
- Easy To Install
- Improves Engine Efficiency
- Increases Power
Cons
- 2 Weeks None Yet
Best Uses
Comments about BWD Fuel Injector - MFI:
Took a couple of hours at home, remove plastic intake plenum, replaced intake gasket and holding bracket. Old holding bracket on CPI (Central Port Injection) unit is normally loose, this one the MPFI (multi port fuel injection) will be tight. 2 hardest part for me was getting the dang cruise control cable off, it had a plastic what we call an "E" clip, this was done on 2001 chevy express 1 ton van. the second is when you put plastic plenum back on the spider fits real snug into the plenum hole. Trick is put back tiny nuts on spider where the fuel rails go in, then pry against intake to bottom of nuts VERY GENTLEY. Please dont brake your intake doing this trick. If it still doesnt go, you can snug down with intake bolts, just go around evenly and slow.
Good product... seams there all the same part just old productions from the dealer. paid $260ish on 10/2012. with a 20% off coupon code. Check youtube for vidoes that may help
Pros
- Easy To Install
- Improves Engine Efficiency
- Increases Power
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about BWD Fuel Injector - MFI:
I bought this part to fix my misfire on #4 cylinder. I have had this problem for about a year. I started by changing just the injector for the #4 cylinder. fixed for a month then came back. Replaced a few more items that could have been the cause with no luck. I finally decided to buy the MFI kit with an online coupone. Took around 2hrs to swap out with the new unit. Cleared my codes and took it for a drive. Its only been a few weeks but no codes have been set and I have seen a big improvement in gas mileage and over all engine performance.
Pros
- Easy To Install
- Improves Engine Efficiency
- Increases Power
Cons
Best Uses
- Everyday Driving
- Performance Driving
- Replacement
Comments about BWD Fuel Injector - MFI:
Part made a huge difference. Glad this updated the horrible original injector system. The OEM part design was a nightmare. This solves so many issues with the Vortec style fuel injection systems. Would have liked to of seen braided hoses instead of plastic ones. However instillation was a snap and all went well!
Pros
- Easy To Install
- Improves Engine Efficiency
Cons
Best Uses
- Everyday Driving
Comments about BWD Fuel Injector - MFI:
Installed on 1996 z71 5.7 with 230k. Took 2 hours start to finish. It was missing on 1cyl,now runs smother than it has in 10 years.
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
15 Questions | 17 Answers
Displaying questions 1-10Previous | Next »
Q:
in the item description it says (Requires New MFI Gasket Kit (Sold Separately).; Bracket and Gasket Required But Not Included)what would be the part numbers for the bracket and gaskets for a 1996 GMC 1500XC with the 5.7 ltrAsked on 3/2/2013 by WILLMANN from Marietta, GA1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the BWD Fuel Injector - MFI - Part No. 63886 you would need the following bracket and seal sets: BWD Fuel Injector Retaining Bracket - Part No. 28428 and BWD FI Seal Kit - Part No. 274789 for your 1996 GMC K1500 XC 5.7L truck. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/4/2013 by John the Car-Doc from AAP
Q:
what are the stock size injectors in a 96 gmc sierra 5.7? and what size are these new design ones? i installed these in my truck and it runs good, but now it falls on its face at 4000 rpms. any ideas? thanksAsked on 10/18/2012 by J.C.1 answer
CUSTOMER CARE
A:
For your 1996 GMC Sierra 5.7L, the stock 210 hp 350 V8 up to 250 hp the stock 55 lb truck injectors at the factory 9-12 psi is fine. This BWD Fuel Injector - MFI (Part No. 63886) is an exact OEM product for your 1996 GMC Sierra 5.7L. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 10/19/2012 by Rick from AAP
Q:
I have a 96 Silverado with a 305, it has a #6 bad injector according to my scanner. Can I replace just the one injector or do I have to buy the whole spider? If I have to buy the whole spider, what else do I need part wise to replace the spider injection? My truck has 200k miles on it.Asked on 9/23/2012 by chris731 from cuyahoga falls, oh1 answer
CUSTOMER CARE
A:
Yes, you can very well replace just the one (#6) injector which is bad on your Chevrolet Silverado. But it is better to check the other injectors as they may also cause problems. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 9/24/2012 by Vincent from AAP
Q:
i have a 1996 gmc suburban with the 5.7 vortec and i want to install this to fix my injector problem but i need to know if the mounting bracket is included with this and if not what is the part number for it so i can get it befor i start this projectAsked on 8/30/2012 by George from manchester, nh1 answer
CUSTOMER CARE
A:
This BWD Fuel Injector - MFI (Part# 63886) requires bracket and gasket. But not included. You need to buy BWD Fuel Injector Tune-Up Kit (Part# 11219) and BWD Fuel Injector Retaining Bracket (Part# 28428) for installation. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 8/31/2012 by Rick from AAP
Q:
have a 1998 chevy c2500 5.0L cyl's 2,4,6,&8 spark plugs have soot on them because they are getting to much fuel you can smell fuel and see some black while truck is idleing seems to run better when you hold it at about 2100 rpm. What is most likely to be the problem fuel injection or something ealse.The only code i am getting is po300 multipule misfire.I have already checked fuel pressure 55psi compreshion tested all 4 cyl's 180 to 190 psi,have replaced plugs & wires cap & button. Thank you for any help you can give to solve this problem.Asked on 8/29/2012 by bubby from loudon tn1 answer
CUSTOMER CARE
A:
The code P0300 on your 1998 Chevrolet C2500 5.0L may be caused due to faulty spark plugs or wires, faulty coil (pack), faulty oxygen sensor(s), faulty fuel injector(s), burned exhaust valve, faulty catalytic converter(s), stuck/blocked EGR valve / passages, faulty camshaft position sensor or defective computer. However, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 8/30/2012 by Rick from AAP
Q:
Will this Fuel Injector come with all the seals ready to install?Asked on 5/4/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This BWD Fuel Injector - MFI with Part No. 63886 includes caution sheet and O-ring. In order to check the exact fit application, please provide the year, make, model and engine size of the vehicle and we would be better able to assist you.Answered on 5/8/2012 by Steve from AAP
Q:
when i get this Fuel injector SCPI Coversion to MFI, what are the other parts needed it says Bracket & gasket kit can i get some part numbers for this needed stuffAsked on 4/21/2012 by Neil from Richmond. VA1 answer
CUSTOMER CARE
A:
We greatly appreciate your taking time to submit a review. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to assist you.Answered on 4/23/2012 by Vincent from AAP
Q:
I have a 96 Chevy Silverado Z-71 with a 5.7 Liter 350 V8. It is all of a sudden loping at and idle, I smell gas and it it running very rich all of a sudden. When you start it up it blows black smoke out both exhaust. Also while coasting it will start popping and at night flames shoot out exhaust and smoke bellows. Otherwise going down the road it runs ok other that excessive gas consuption. Is most likely injector problem. Truck has recently had new cap, rotary button, wires, plugs and coil.Asked on 10/14/2011 by Anonymous from Lavinia, Tennessee1 answer
CUSTOMER CARE
A:
As you changed your spark plug, wires and coil, the next main concern is fuel injector and oxygen sensor. These are quite a few things to check - compression, valves and intake manifold gasket.Answered on 10/15/2011 by Dennis from AAP
Q:
My 1996 5.0 liter silverado runs pertty good at high speeds has a slight miss around 2000 rpm, but idles very ruff almost dies, have been told I need the fuel injectors replaced. will this part fit my engine and does it come with everything needed to replace what I have or will I have to have more parts and what would thoes parts be that I will need.Asked on 9/19/2011 by Anonymous from Paducah, KY1 answer
CUSTOMER CARE
A:
Yes, this part fits your 1996 5.0 liter Silverado.Answered on 9/20/2011 by Aaron from AAP
Q:
hello my name is Joe Gutierrez, my question to is is this the only fuel injector system that is in a 1996 1500 4x4(z-71) or is their more to it i was told that i have a misfire on 3,5,and 7 is this part the same thing as a spider fuel injection? my 1996 is a trotle in jectionAsked on 6/26/2011 by Anonymous2 answers
CUSTOMER CARE
A:
We will need more information including the year, make, model, and engine size of your application before we can make a suggestion. Please call us at 1-877-ADVANCE (238-2623) and we would be more than happy to further assist you.Answered on 7/8/2011 by Steve from AAPA:
Just put this system in my 96 5.7 v8. Worked and runs greatAnswered on 8/7/2011 by new guy from Cinci, OH
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
