-
Your Store:
-
See if this part fits a specific vehicle.
| ABS Sensor Included: | Yes |
| Bolt Circle Diameter: | 5.00 |
| Bolt Hole Quantity: | 3 |
| Bolt Quantity: | 6 |
| Bolt Size: | M12X1.5 |
| Brake Pilot Diameter: | 3.11 |
| Flange Diameter: | 5.94 |
| Flange Offset: | 1.85 |
| Flange Shape: | Triangular |
| Hub Bolt Circle Diameter: | 4.75 |
| Hub Pilot Diameter: | 3.62 |
| Location: | Front Wheel |
| Spline Count: | 27 |
| Wheel Pilot Diameter: | 3.06 |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
Most Liked Positive Review
Night & Day
It took me longer than I cared for to figure out my wheel bearings were the problem, but once I did it's like driving a new car. The symptoms that went along with the ...Read complete review
It took me longer than I cared for to figure out my wheel bearings were the problem, but once I did it's like driving a new car. The symptoms that went along with the bad wheel bearing were increased noise and vibration with speed. I initially thought the tires were the problem but replacing them did not address the issue. I then caught a Sunday morning show replacing the hub assembly on a GM and decided to try it. I've owned vehicles over 100K and never had to replace a hub assembly so it never crossed my mind. I have an Envoy, the noise and vibration issues started around 75K. I was only able to get one at a time due to store availability. I did have to buy the 35mm axle socket and you will need it, if you have a standard one it won't be deep enough. The job took me about 90 minutes; the hardest part was removing the wire snaps from the ABS harness. I did the driver's side first and saw a dramatic improvement. I was so impressed I drove out of the way to get second the one the next day. I replaced that one in 50 minutes. NO NOISE or VIBRATION! It's like driving a new car, the car coast so smoothly. I bought the higher end ones like most people recommended. Only one day in but so impressed with the difference I felt driven to leave feedback. I'll add more if there are issues.
VS
Most Liked Negative Review
Another part NOT MADE IN USA !
It's getting extremely hard to find quality parts that are built in the good old USA. These big chain auto stores are all about making a good buck selling cheap parts sourced overseas. Give ...Read complete review
It's getting extremely hard to find quality parts that are built in the good old USA. These big chain auto stores are all about making a good buck selling cheap parts sourced overseas. Give me the good stuff, I am willing to pay for it. Give me the choice.
REVIEWS
Reviewed by 34 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Part worked great once installed. The 3 year warranty is a big plus, but hope that I won't need it.
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Moog is top of the line.
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
I would highly recommend spending the extra money and getting this part
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Granted that we have only had these on the 2002 Trailblazer for a week, it has 100% corrected the problem. Only the passenger side needed to be replaced, but we choose to do both sides at one time. The part was a direct fit and it's nice that the speed sensor was included with the hub assembly. Part appears to be good quality.
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Although no longer made in the USA, the are made in Korea vs. China which is a plus. I can't comment on longevity since I just installed them, but the 3-yr warranty was a definite selling point. With the help of some generous coupon codes, this purchase was not all that expensive and doing it myself saved me about $200 alone. Installation was terribly difficult, but there is not a lot of room to remove the three bolts holding these hub assemblies on. A little PB Blaster, 6-point sockets and some elbow grease does the trick. An impact gun for the axle nut was a big help.
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Moog products have a great reputation
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
Perfect fit all around. The plastic pieces to hold the wires from pinching are placed perfectly for easy installation.
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
The job was a lot easier than anticipated. I was glad that it came with new clips for the ABS wire, as the old ones were destroyed during removal.
Comments about Moog Front Wheel Hub Assembly:
perfect fit
Pros
Cons
Best Uses
Comments about Moog Front Wheel Hub Assembly:
easy to install
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
Will this assembly work on a RWD trailblazer? the front hub is the one that needs to be replaced.1 answer
CUSTOMER CARE
A:
For further assistance regarding Moog Front Wheel Hub Assembly, Part No. 513188, please provide the year, make, model and engine size of your vehicle. This information would help us to assist you in a better way.Q:
what country is it made in?2 answers
CUSTOMER CARE
A:
It is manufactured in USA.A:
The item 513188 I purchased on March 7, 2012 was made in Korea. I am completely satisfied with the quality of the item at this time though. Made in Korea is better than made in China any day of the week. IMHOQ:
The item shows Quan=2, does that means it comes as a pair or 2 are required?1 answer
CUSTOMER CARE
A:
2 are recommended.