-
Your Store:
-
Hover over the image to zoom in
National Front Wheel Bearing
See if this part fits a specific vehicle.
Designed to provide enhanced endurance and maximum contamination exclusion while ensuring proper fit, form and function.
Back To Top
| Inner Diameter: | 0.75 in |
| Outer Diameter: | 1.781 in |
| Width: | 0.61 in |
REVIEW SNAPSHOT®
by PowerReviewsNationalFront Wheel Bearing
(based on 4 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Durable (3)
- Easy to use (3)
Cons
Best Uses
- Trucks (3)
- Reviewer Profile:
- Casual driver (3)
- Was this a gift?:
- No (4)
REVIEWS
Reviewed by 4 customers
Sort by
Displaying reviews 1-4
Pros
- Durable
- Easy To Use
- Good Value
- Quality Materials
Cons
Best Uses
- Trucks
Comments about National Front Wheel Bearing:
Product is great. Exact fit.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about National Front Wheel Bearing:
Really like the online order process. Everything ready when I got to the store.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
Cons
Best Uses
- Trucks
Comments about National Front Wheel Bearing:
The National bearings are much more expensive than the competition. I did front rotors on my light truck and had to buy inner/outer on both sides. However, the product is excellent quality and a trusted name. Also consider, how many times are you going to replace front bearings on ANY car? Once? You might at well do it right while you have the rotors off! Don't be affraid of this repair...JUST DO IT!
- Was this a gift?:
- No
Pros
- Good sizefit
Cons
Best Uses
- Everyday driving
- Replacement part
Comments about National Front Wheel Bearing:
Each came sealed in plastic in a box. Each comes with the outer race (red part of the picture).
I used these while replacing all the front pads, rotor-hubs, bearings, and seals on a 1997 Ford Explorer (RWD). These A-2 bearings matched up with the dimensions on the old ones. Packing these bearings by hand was more difficult than the larger A-5 bearings for this same job. The new rotor-hubs had races already installed, so I didn't need the ones that came with these bearings.
The only con so far is that I dropped one. No scratches or dirt in it, so we'll see.
- Was this a gift?:
- No
Displaying reviews 1-4
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
7 Questions | 8 Answers
Displaying questions 1-7
Q:
2000 Ford Ranger 2WD - There is no inner bearing, correct, just the brace, which in my case, is already installed in the rotor? Correct? Thanks!Asked on 11/16/2012 by trpreacher1 answer
CUSTOMER CARE
A:
Yes, normally rotor hubs come as races installed and so you will not need the ones that come with the National Front Wheel Bearing - Part No. A-2. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 11/19/2012 by John the Car-Doc from AAP
Q:
is this bearing for both a 2 wheel drive and 4 wheel drive model for the 2000 ford explorer mine has an auto 4wd and the option of high and low rangeAsked on 3/24/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This part National Front Wheel Bearing, Part No. A-2 manufactured by National fits only 2WD models of 2000 Ford Explorer. It does nor fit 4WD models of 2000 Ford Explorer also it does not fit AWD models of 2000 Ford Explorer.Answered on 3/25/2012 by Aaron from AAP
Q:
I wanted to know for sure that this is a single bearing that sets inside the hub assembly on the front. Or do I have to purchase the hub assembly as a whole.Asked on 1/13/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This National Front Wheel Bearing with part# A-2 is a single bearing that sets inside the hub assembly on the front.Answered on 1/15/2012 by Vincent from AAP
Q:
Is this price for 1 bearing or 2 ? Basically one side or both sides ?Asked on 8/30/2011 by Tim from Cincinnati, Ohio1 answer
CUSTOMER CARE
A:
This wheel bearing is for one side.Answered on 8/31/2011 by Vincent from AAP
Q:
Does this bearing have to be pressed in by a machine?Asked on 3/9/2011 by Suzy Q from Riverdale, Ill1 answer
CUSTOMER CARE
A:
No, it does not require a machine press while installation. Using the new bearings, replace the old ones, tapping them into place. Pack with grease when they are in place. Install new seal after the bearings are packed with grease.Answered on 5/10/2011 by Just Ask Jacob! from AAP
Q:
is this the BEARING and RACE for the front outside of hub?Asked on 7/17/2010 by Anonymous1 answer
CUSTOMER CARE
A:
For further assistance, please provide the year, make, model and engine size of your vehicle.Answered on 8/11/2010 by Mike from AAP
Q:
these are for the front right?Asked on 6/12/2010 by Anonymous2 answers
CUSTOMER CARE
A:
Yes these are for the front.Answered on 6/15/2010 by Kevin from AAPA:
Correct. The front right... And left. ;)Answered on 11/12/2011 by Harry from Lincoln
Displaying questions 1-7
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
