-
Your Store:
-
Hover over the image to zoom in
ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit
See if this part fits a specific vehicle.
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.
Back To Top
ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.
REVIEW SNAPSHOT®
by PowerReviewsACDelcoEvaporative Emission Canister Vent Valve Solenoid Kit
(based on 5 reviews)
Ratings Distribution
40%
of respondents would recommend this to a friend.
Pros
Cons
Best Uses
- Trucks (3)
- Was this a gift?:
- No (4)
REVIEWS
Reviewed by 5 customers
Sort by
Displaying reviews 1-5
Pros
- Lightweight
Cons
Best Uses
- Trucks
Comments about ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit:
Ordered as best price for high priced item, 3 trips to store to pick up and when doing install discovered that parts were mismatched as hose fittings did not match up. Had to pick up from another store and returned this for refund. CSR checked another box on shelf and those would have matched - how disappointing that I got the BAD part. Should have checked fittings before starting installation!
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- It Had The Same Markings
Cons
- None
Best Uses
- Trucks
Comments about ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit:
i installed it and cleared the codes and done...
- Was this a gift?:
- No
Comments about ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit:
The kit contains a filter and valve. GM used permanently connected hard plastic tube to connect to each so the tubing had to be broken to disconnect the old parts. I was able to reconnect the new parts using the same tubing and shrink tubing and it fixed the problem. Too much for what your receive. Should at least come with hoses to reconnect. GM probably has $15 dollars in cost and sells for [$]. Highway Robbery!!
Pros
Cons
- Difficult To Use
Best Uses
Comments about ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit:
This included a solenoid valve and a breather cap. It does not include the hard plastic line that runs between the valve and cannister or the rubber line from the valve to the breather cap. I had to rig some heater hose and clamps to get it to fit as the hard plastic line is not detachable from the old valve. For the price of [$] it should at least include the plastic and rubber hoses.
- Was this a gift?:
- No
Pros
Cons
- Difficult To Use
- Overpriced incomplete
Best Uses
- Trucks
Comments about ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit:
Only included the solenoid and breather cap, no tubing or connectors. The connection going to the cannister is hard plastic and cannot be reused, I had to use rubber tubing and clamps to make it work. Likewise the tubing for the breather was difficult to remove from the old piece and atach to the new. At the price of [$] the tubing and new connectors should be included, it would still be overpriced but at least it would fit properly.
- Was this a gift?:
- No
Displaying reviews 1-5
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
16 Questions | 18 Answers
Displaying questions 1-10Previous | Next »
Q:
where does the evaporative emission control system vent valve/solenoid circuit go and how do you install it on a 2008 chevy silverado p/u extra cab 5.3L 325ci V8Asked on 8/1/2012 by jefferey from Saylorsburg,Pa.1 answer
CUSTOMER CARE
A:
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: Push the large size white retainer portion in. Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector. Remove the EVAP canister purge solenoid bolt. Remove the EVAP canister purge solenoid and insulator. Reinstall in reverse order. The torque specication should be approximately 91 inch lbs. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 8/2/2012 by Vincent from AAP
Q:
I'm having difficuty finding the proper selenoid purge set for my 2001 chevrolet silverado 5.3. Any help would be greatAsked on 6/11/2012 by Anonymous1 answer
CUSTOMER CARE
A:
To know the exact fit application, please provide the exact model of the vehicle and we would be better able to assist you.Answered on 6/15/2012 by Steve from AAP
Q:
where is this part attached to the fuel line at and is there another located on the engine somewhereAsked on 5/17/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Inorder to know the exact location of emission canister vent valve solenoid, please provide your vehicle year, make, model and engine specification.Answered on 5/17/2012 by Dennis from AAP
Q:
I have a 2006 silverado and get code po455 and whatever the one is for small leak too have replaced fuel cap that wasnt it could this part be the problem?Asked on 4/28/2012 by Anonymous from Sidney,NY1 answer
CUSTOMER CARE
A:
Common causes of this code p0455 are a loose or missing gas cap or a gas cap that has a bad seal. If the gas cap is good and has not been left loose, the other cause could be a bad evap vent solenoid valve. If the valve sticks open, the same code will set. However, without the presence of your vehicle we would not be able to properly diagnose it nor provide you with a 100% answer. We would suggest that you take your vehicle to a certified mechanic for further diagnosis.Answered on 4/30/2012 by Dennis from AAP
Q:
i have 2007 silverado classic LS. Throws code every 2 years it seems. time to do it on my own. I found it but i need the part # for it. I dont have pictures to compare mine from the one i need to buy. Any help?Asked on 4/19/2012 by Driller1 answer
CUSTOMER CARE
A:
Yes, this ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit Part number 214-2082 fits your 2007 Chevrolet Silverado Classic LS.Answered on 4/20/2012 by Steve from AAP
Q:
I have a 2005 gmc sierra 1500 z71 crew cab I also am in need fo the evaporator purge valve but I do no which one to purchase my truck has the 5.3 leter eng. the valve is the one on the motor.
ANY HELP SURE WOULD BE APPRECIATED.
dpeak63@yahoo.coAsked on 4/4/2012 by Anonymous from Haleyville ,Alabama1 answer
CUSTOMER CARE
A:
The ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit with part# 214-2082 should be an exact fit for your 2005 GMC Sierra 1500 z71 crew cab with 5.3l.Answered on 4/6/2012 by Vincent from AAP
Q:
I HAVE A 06 SIERRA 1500 HD. I NEED TO REPLACE THE EVAPORATIVE VENT VALVE, BUT THERE IS A UPGRADE TO REROUTE THE HOSE. CAN ANY TELL ME HOW TO DO THIS. BULLETIN #02-06-04-037CAsked on 4/2/2012 by Anonymous1 answer
CUSTOMER CARE
A:
I would suggest taking your 2006 Sierra 1500 HD to a certified mechanic for a proper diagnosis before buying and having the ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit, part 214-2082 installed.Answered on 4/27/2012 by Eric from AAP
Q:
I am having difficulty locating the solenoid vent valve for my 2007 Chevy Silverado Classic V6. This is the WT extended cab model.Asked on 2/2/2012 by Anonymous2 answers
A:
LOOK ON THE BACK OF THE TANK NEAR THE TOPAnswered on 3/27/2012 by GDOG from MASSCUSTOMER CARE
A:
This ACDelco Evaporative Emission Canister Vent Valve Solenoid Kit (Part No. 214-2082) is not the correct part for your 2007 Chevrolet Silverado V6. Please check ACDelco Evaporative Emission Canister Purge Solenoid Valve (Part No. 214-1105) which would be the ideal fit for your vehicle.Answered on 2/4/2012 by John the Car-Doc from AAP
Q:
I have a 2005 Chevy Silverado. where is the Evaporative Emission Canister Vent Valve located on my vehicle and can i get a picture of this product please? I already relaced the part under the hood. Part Number 214-1105. supposedly there is another part back by the gas tank.Asked on 1/8/2012 by Rich from Burton, Oh1 answer
CUSTOMER CARE
A:
This Evaporative Emission Canister Vent Valve Solenoid Kit is located on the fuel tank or right side of your fuel tank. I apologize that we do not have a picture of this product right now; however, if you are to visit your local Advance Auto Parts store, the representative there will be happy to assist you with this.Answered on 1/10/2012 by Dennis from AAP
Q:
I have a 2007 Gmc Sierra. where is the Evaporative Emission Canister Vent Valve located on my vehicle and can i get a picture of this product please? I already relaced the part under the hood. Part Number 214-1105. supposedly there is another part back by the gas tank.Asked on 11/27/2011 by John from clinton MD1 answer
CUSTOMER CARE
A:
The required information has been sent to the mail address provided.Answered on 11/28/2011 by Vincent from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
