-
Your Store:
-
Hover over the image to zoom in
ACDelco Evaporative Emission Canister Purge Solenoid Valve
See if this part fits a specific vehicle.
ACDelco is a global leader in automotive replacement parts and related services and offers quality aftermarket products for most makes and models, including General Motors, Ford, Chrysler, Toyota and Honda, plus many original equipment service replacement parts. ACDelco products can be found in more than 100 countries located on six of the seven continents and are sourced globally to meet the needs of the local markets, including "maintenance" parts commonly replaced during the lifetime of a vehicle (e.g., batteries, oil filters, air filters, wiper blades, shocks and brakes), as well as "repair" parts (e.g., alternators, radiators, chassis and heating/cooling components). ACDelco offers more than 80,000 parts across 37 product lines.
Back To Top
ACDelco has over 100 years of experience in the automotive industry and is a brand of GM Customer Care and Aftersales, a division of General Motors. ACDelco employs a two- or three-tiered distribution model, utilizing a network of appointed wholesale distributors to service independent installers, ACDelco independent service centers, retail and fleet customers.
| O.E.M. Replacement: | Yes |
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
15 Questions | 15 Answers
Displaying questions 1-10Previous | Next »
Q:
how to install part 214-1680 on 07 tahoe how to get clips offAsked on 1/26/2013 by shawn1 answer
CUSTOMER CARE
A:
With reference to your inquiry on the ACDelco Evaporative Emission Canister Purge Solenoid Valve - Part No. 214-1680 use a small/medium screwdriver and pry up the middle locking tang on the metal retainer clip that's bolted to the block. The purge valve solenoid slides onto this retainer but is locked into place by a middle finger/tang on the retainer that faces towards the block. The metal retainer clip has a cut out in the middle with a thin locking tang that's bent facing down. From the top of the retainer, insert your screw driver from the transmission side into the slit closest to the transmission and pry up until the center tang is sticking up in the back (closest to the block). Now it should no longer be engaged with the purge valve solenoid. Now you need to pull and wiggle the purge solenoid off of the retainer, it doesn't slide off as easily as you'd expect. Pull the retainers apart to release the vent solenoid from the bracket, and then remove it from the vehicle. To reinstall the vent solenoid, follow the steps for removal in reverse order. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 1/28/2013 by John the Car-Doc from AAP
Q:
Where is the Evap Canister for 06 Grand Prix GXPAsked on 10/17/2012 by Billqb from Michigan1 answer
CUSTOMER CARE
A:
The Evap Canister on your 2006 Pontiac Grand Prix GXP should be located right below the filler neck. This ACDelco Evaporative Emission Canister Purge Solenoid Valve - part# 214-1680 is an exact fit for your 2006 Pontiac Grand Prix GXP. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 10/17/2012 by Vincent from AAP
Q:
where the evap purge sol in my 2007 alavancheAsked on 9/28/2012 by don from port charlotte fl1 answer
CUSTOMER CARE
A:
The EVAP purge solenoid should be located above and ahead of the rear axle under neath the box. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 9/28/2012 by Steve from AAP
Q:
part # 214-1680 AC Delco, need to know which evaporative emission canister purge solenoid valve is this one on your page for my 07 chevy suburban 1500LT VIN 8 is 3. is this for the one on engine or rear bottom of truck?Asked on 7/3/2012 by Denis from Staten Island NY1 answer
CUSTOMER CARE
A:
This ACDelco Evaporative Emission Canister Purge Solenoid Valve (Part# 214-1680) should fit your 2007 Chevrolet Suburban 1500 LT. It is the exhaust manifold rear canister purge solenoid valve. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 7/5/2012 by Ralph from AAP
Q:
where is the evaporator canister located 2008 trailblazerAsked on 4/22/2012 by sal1 answer
CUSTOMER CARE
A:
Yes, this part ACDelco Evaporative Emission Canister Purge Solenoid Valve, Part No. 214-1680 manufactured by ACDelco fits your 2008 Chevrolet Trailblazer. The Evaporator canister should be located under your car hood.Answered on 4/23/2012 by Aaron from AAP
Q:
Where is this located on a 2006 Saturn Ion? Thanks.Asked on 3/27/2012 by Dwayne from Kokomo,IN1 answer
CUSTOMER CARE
A:
On the top of the throttle body on your Saturn Ion there is two small vacuum lines that lead down behind the engine, follow these and they will lead to the canister solenoid.Answered on 3/27/2012 by Vincent from AAP
Q:
Where is this located on a 2007 2.0L SC Cobalt SS?Asked on 3/23/2012 by Sal from Florida1 answer
CUSTOMER CARE
A:
The canister purge solenoid on your 2007 Chevy Cobalt SS is located under the hood and this ACDelco Evaporative Emission Canister Purge Solenoid Valve with part# 214-1680 fits your 2007 Chevrolet Cobalt SS.Answered on 3/24/2012 by Vincent from AAP
Q:
where is this part located in the vehicleAsked on 3/19/2012 by Anonymous from Quincy Mass1 answer
CUSTOMER CARE
A:
To know the exact location of this part, if you could please include the year make and model of the vehicle and we would be better able to assist you.Answered on 3/19/2012 by Dennis from AAP
Q:
Where is this valve located on a 2008 GMC sierra Denali.Asked on 3/13/2012 by jim from webster, ma1 answer
CUSTOMER CARE
A:
The Evaporative Emission (EVAP) Canister Purge Solenoid Valve is located in the EVAP canister, usually above the rear of the muffler.Answered on 3/14/2012 by Steve from AAP
Q:
I have a 2007 GMC Envoy SLT. What is the difference between 214-1680 and 25950499? They both say "Evaporative Emission Canister Purge Solenoid Valve".Asked on 1/31/2012 by Anonymous1 answer
CUSTOMER CARE
A:
Evaporative Emission Canister Purge Solenoid Valve Part Number (25950499) from ACDelco will be the exact fit for your 2007 GMC Envoy SLT and the Part Number (2141680) does not fit your 2007 GMC Envoy SLT.Answered on 2/1/2012 by DIY Daniel from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
