-
Your Store:
-
Hover over the image to zoom in
BWD EGR Valve
See if this part fits a specific vehicle.
BWD EGR valves are manufactured to meet or exceed OE performance.
Back To Top
| Connector Gender: | Female |
| Terminal Gender: | Male |
REVIEW SNAPSHOT®
by PowerReviewsBWDEGR Valve
(based on 13 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to use (5)
Cons
Best Uses
- Trucks (6)
- Car & Truck:
- Mechanic (4), Truck enthusiast (4)
- Reviewer Profile:
- Mechanic (4)
- Was this a gift?:
- No (7)
Most Liked Positive Review
Much better solution than a dealership!
Can't speak to longevity yet, but install was pretty easy, and the Check Engine Light hasn't been on since. One bolt was a bit tricky to get to, but I've dealt with much ...Read complete review
Can't speak to longevity yet, but install was pretty easy, and the Check Engine Light hasn't been on since. One bolt was a bit tricky to get to, but I've dealt with much more diffucult installs than this. Beats giving a dealership $250 to replace - that's a waste! Highly recommended!
VS
Most Liked Negative Review
Make sure it mounts correctly
Resarched part on Web site their part is correct by its picture, but part I bought is like looking in a mirror at it everything is the complete opposite must return, obviously a manufacturers ...Read complete review
Resarched part on Web site their part is correct by its picture, but part I bought is like looking in a mirror at it everything is the complete opposite must return, obviously a manufacturers defect.
REVIEWS
Reviewed by 13 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Use
Cons
Best Uses
- Large Cars
- Small Cars
- Trucks
Comments about BWD EGR Valve:
My old EGR valve in my 2006 Dodge Ram 5.7 Hemi truck went bad staying in the closed position throwing a C.E.L "check engine light" with a trouble code #1404 checked by the guy's at Advanced Auto Parts, but it must have been going bad for a while before the light ever came on until now. Because my mileage had fallen off about 1-1/2 yr's ago dropping down to the high 14 to low 15 MPG average, now it's back up in the 18 mpg range around town. So i'm sure it won't take long for the new valve to pay for itself.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about BWD EGR Valve:
I have always used Advance Auto Parts to buy my replacement parts for my Dodge truck. The parts that they sell always are easy to install,work just like factory parts and are priced right. Thanks again Advance Auto Parts.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
- Trucks
Comments about BWD EGR Valve:
Installed in about 15 minutes.
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about BWD EGR Valve:
Can't give a great review for something that does what it is supposed to do. It functions as it should and the price is reasonable.
- Was this a gift?:
- No
Pros
Cons
- Incompatible
Best Uses
- Trucks
Comments about BWD EGR Valve:
Resarched part on Web site their part is correct by its picture, but part I bought is like looking in a mirror at it everything is the complete opposite must return, obviously a manufacturers defect.
- Was this a gift?:
- No
Pros
- Easy to install
- Price
Cons
- No instructions
Best Uses
Comments about BWD EGR Valve:
My 2005 Dodge HEMI RAM was throwing an error light for "EGR circuit high". [...] I installed it in 30 minutes using simple hand tools. I cleared the codes and the truck has been running fine. The only complaint I have is the lack of instruction but anyone familiar with working on their vehicles should be able to figure it out.
- Was this a gift?:
- No
Pros
- Easy To Use
- Good quality
- Perfect Fit
Cons
Best Uses
- Trucks
Comments about BWD EGR Valve:
I replaced my EGR valve on my truck and this part was an exact fit. In the box was the EGR valve and both of the gaskets. Took me about 30 minutes to change it out. Haven't had any problems since.
- Car & Truck:
- Casual Driver, Mechanic, Truck Enthusiast
- Was this a gift?:
- No
Pros
- Bolts gasket included
- Durable
- Easy To Use
- High-Performance
Cons
- None perfect fit
Best Uses
Comments about BWD EGR Valve:
perfect fit, bolts and gasket included and a nascar sponsored product
- Car & Truck:
- Mechanic
Pros
- Easy to install
Cons
- None
Best Uses
Comments about BWD EGR Valve:
[...]
- Car & Truck:
- Truck Enthusiast
Pros
- Easy To Use
- Looks good so far
Cons
Best Uses
Comments about BWD EGR Valve:
Installed on 2004 Dodge Durango due to vehicle not passing emissions test. Easy to install, fixed the problem, and saved mucho dollars. What else would you want?
- Car & Truck:
- Shade Tree Mechanic
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
9 Questions | 13 Answers
Displaying questions 1-9
Q:
Where is this thing at under the hood? I can't find where this Valve is located.Asked on 5/6/2013 by Weebee1 answer
CUSTOMER CARE
A:
In order to assist you further about BWD EGR Valve - Part No. EGR1586, please provide the year, make, model and engine size of your vehicle application or you can contact us directly at 1-877-ADVANCE (238-2623) or visit your nearest Advance Auto Parts store for further assistance.Answered on 5/6/2013 by Morgan from AAP
Q:
does this come with gasketAsked on 6/29/2012 by rich1 answer
CUSTOMER CARE
A:
Yes this BWD EGR Valve (Part# EGR1586) comes with required bolts and gaskets. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 6/30/2012 by Ralph from AAP
Q:
I have a 2007 Dodge Ram 1500 5.7l 1/2 ton.
Will this EGR1586 fit onto my truck. I have been told that it will work on Models 2004 to 2008. Before I buy it I just want to make sure I have the correct one. I know on your site it say it will not fit but I have been told otherwise.
Any help would be great!!Asked on 2/23/2012 by Nick. from Edmonton, Alberta, Canada1 answer
CUSTOMER CARE
A:
No, this BWD EGR Valve Part number EGR1586 does not fit your 2007 Dodge Ram 1500 5.7L.Answered on 2/23/2012 by Steve from AAP
Q:
My 04 Dodge Ram 1500 Hemi has the error code P0404 Exhaust Gas Recirculation Circuit Range/Performance, P0038 HO2S Heater Control Circuit High (Bank 1 Sensor 2), & P0137 02 Sensor Circuit Low Voltage (Bank I Sensor 2). Will a new EGR valve fix the issue? My truck also dies at random times, but not very often. I've read that issue can be corrected with a new EGR valve, but not sure if all the issues can stem from the same valve.Asked on 1/19/2012 by Kevin from Tampa, Fl.2 answers
A:
I had the same code read on my 04 1500 Hemi. I replaced the EGR valve and the code went away. I also have an issue with my truck dying at random times. It hasn't died since I replaced the valve but I am having low idle issues when i come to a stop. I am in the process of finding an answer to this problem.Answered on 5/22/2012 by Jason from Olathe, KSCUSTOMER CARE
A:
Unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. We highly recommend taking your vehicle to a reputable shop to have them take a look at it to determine the cause.Answered on 1/19/2012 by Steve from AAP
Q:
HOW HARD IS IT TO REPLACE.Asked on 4/26/2010 by JERRY from MARTINSBURG WV3 answers
VERIFIED BUYER
A:
It truly is not that hard to replace. It takes a minimum of skill and there are only 4 bolts to remove and replace. Need to make sure all of the previous gasket material is removed prior to installing the new EGR and gaskets. On the newer rams there are no other parts that really intefer or have to be removed to install this.Answered on 7/26/2010 by 06 Ram from Indpls, INCUSTOMER CARE
A:
I would say it is a moderate difficult job.Answered on 4/27/2010 by Kevin from AAPA:
Not bad at all. You remove the air intake pieces by simply turning the hose clamp type screw nearest the intake manifold. The rest of the pieces detach with a clip (air cleaner box) or simply push into place, pull to remove (rubber gasket type fit). With those pieces gone, you slide the locking clip (on top)for the electrical plug to the side, and then the connector plug will detach. The rest is a simple 4 bolts to remove (2 at both connections). With the old EGR gone, the connection to the tube that runs to the exhaust moves/pivots and that helps you get the screws started. The tube also moves pretty freely, helping out with positioning. One of the bolts is a bit awkward to get to, but it's managable. My new EGR included both new gaskets - (a metal one to the engine side, and a paper one to the smaller exhaust inlet tube side). Replace in reverse order of removal, and your done. An hour if you take your time and are careful, tops.Answered on 7/6/2010 by BJT from Des Moines, IA
Q:
I have a 2005 Dodge Ram 1500 5.7L. The engine is starting to stall, and it is happening more frequently. It stalls when you are driving slow, accelerate a little, and let off of the accelerator. usually when turning or slowing. the engine cuts off and it restarts fine. Usually happens when the truck is warmed up, but has started when cold. I have read some other reviews and some say dirty throttle body and some say EGR valve possibly bad. I have cleaned the Throttle Body, but it hasn't quite fixed it 100%. Does anyone know if changing the EGR Valve will fix the problem or know what is causing it?
Thanks for your help.Asked on 4/19/2010 by Steven from Columbi, MD1 answer
A:
Try unplugging the egr valve and see if it stops stalling. If it runs fine then you know the egr is the problem. It will throw a check engine light but it will go out when you either replace or plug in the egr valve again.Answered on 6/10/2010 by muddin79 from Beaufort, SC
Q:
If I disconnect the battery and reset the computer will the light go out long enough to pass an emissions test?Asked on 4/15/2010 by PStocker25 from TN1 answer
CUSTOMER CARE
A:
It is possible but i do not reccomend you doing that since the EGR can throw the code back on right away.Answered on 4/16/2010 by Kevin from AAP
Q:
Does this part (EGR1586) come with all gaskets required?Asked on 1/19/2010 by Customer from MA1 answer
VERIFIED BUYER
A:
Yes, at least mine did. Check inside the box before you leave the store.Answered on 1/28/2010 by Metalflake from Stafford, VA.
Q:
Where is the EGR valve located? Also, the engine light comes on and sometimes it will even stay off for a week at a time. When i had it tested the computer said it was the EGR flow sensor. Is it possible it's just a bad sensor?Asked on 10/19/2009 by Jason from Palm Coast, Fl2 answers
Displaying questions 1-9
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
