-
Your Store:
-
Hover over the image to zoom in
BWD EGR Valve
See if this part fits a specific vehicle.
BWD EGR valves are manufactured to meet or exceed OE performance.
Back To Top
| Connector Gender: | Female |
| Terminal Gender: | Male |
REVIEW SNAPSHOT®
by PowerReviewsBWDEGR Valve
(based on 30 reviews)
Ratings Distribution
97%
of respondents would recommend this to a friend.
Pros
- Easy to use (14)
- Durable (6)
- Easy to install (4)
Cons
Best Uses
- Large cars (5)
- Car & Truck:
- Casual driver (6)
- Reviewer Profile:
- Casual driver (10), Auto enthusiast (5)
- Was this a gift?:
- No (21)
Most Liked Positive Review
Perfect
Works great. Although Chrysler does it agian with another poor design and the bottom bolt is a bear to remove.
Works great. Although Chrysler does it agian with another poor design and the bottom bolt is a bear to remove.
VS
Most Liked Negative Review
Electrical connector doesn't fit
I installed this on my Town and Country. Tried to plug in the electrical connector. It didn't fit. Pushed the plug in as far as possible. Started car, drove it for 40 miles...Read complete review
I installed this on my Town and Country. Tried to plug in the electrical connector. It didn't fit. Pushed the plug in as far as possible. Started car, drove it for 40 miles. The check engine lignt stayed ON. Removed the part, got one from Chrysler, installed it, the light went out.
REVIEWS
Reviewed by 30 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Easy To Use
Cons
- Not Very High Quality
Best Uses
- Mini Van
Comments about BWD EGR Valve:
Product was fairly easy to install after watching youtube videos. I did feel that it was not the same grade as the original part though.
- Was this a gift?:
- No
Pros
- Durable
Cons
- DIFFICULT TO INSTALL
Best Uses
Comments about BWD EGR Valve:
Due to Dodges infinite wisdom, you have to pull the alternator out of the way to install this. What should have been a 20 minute job, is now 2 hours.
product itself looks fine.
- Was this a gift?:
- No
Pros
- Durable
- Easy To Use
- High-Performance
Cons
Best Uses
- Large Cars
Comments about BWD EGR Valve:
BWD EGR valve was better than the MOPAR OEM EGR vavle which failed twice before I purchased this EGR from BWD. Well made and is as described. Fits exactly and grand caravan has improve mileage and runs great. Thanks Advance Auto!!
- Was this a gift?:
- No
Pros
Cons
Best Uses
Comments about BWD EGR Valve:
Ordered online; picked up at store, plus found a real deal on oil/filter. The bottom bolt on the EGR valve is a challenge. I got a couple box wrenches on it in back and got it to move; then took the top bolt all the way out and pushed the EGR valve to the rear, then could get a box wrench on from the front to take bottom bolt out. Got a set of wobble 1/4" drive extensions to install it with a 1/4" drive 10mm socket. Cleared the code P0404 and no problems.
- Was this a gift?:
- No
Comments about BWD EGR Valve:
I should have changed it 2 years ago when the light came on, it didn't cause me any trouble until a few months ago. I didn't want to pay the $ to fix something that wasn't broken but my 2007 caravan started dying at idle speeds. I replace the easily accessible EGR valve and now everything is great.
Tip: take the top bolt out then rotate the valve out of your way to get the bottom bolt.
Pros
- Easy to install
Cons
Best Uses
- Large Cars
Comments about BWD EGR Valve:
Perfect fit. I didn't realize the gaskets were included and ordered other gaskets. Pain to install because alternator had to be pulled to get to one bolt.
- Was this a gift?:
- No
Pros
- Easy to install
Cons
Best Uses
Comments about BWD EGR Valve:
I installed it last spring. It was easy to install and it still works great.
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
Best Uses
Comments about BWD EGR Valve:
Good service and availabity as promissed.
Complete package with all neccessary gaskets.
Work great!
Thanks AAP
- Was this a gift?:
- No
Pros
- Easy To Use
Cons
- None
Best Uses
Comments about BWD EGR Valve:
Have 2005 Chrysler Town and Country. Had code P404 and replaced this EGR valve and cleared code. Check engine light has not come back on. Replaced valve from the top without moving alternator or anything else. Used a 1/4 in swivel with socket to get to lower bolt on EGR valve.
- Was this a gift?:
- No
Pros
- Easy to install
- Easy To Use
- Fit perfectly
Cons
Best Uses
Comments about BWD EGR Valve:
I bought this for my wife's 2006 Grand Caravan which had a P404 code. It was fairly easy to install and fixed the problem. It has now been a month since I installed with no issues. The most difficult part is getting the bottom bolt out on the existing part, but can be done with a little patience and the correct wrench. Also, it came with both gaskets needed for installation.
- Was this a gift?:
- No
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
11 Questions | 18 Answers
Displaying questions 1-10Previous | Next »
Q:
COULD THE EGR VALVE BEING BAD MAKE THE TRANSMISSION SHIFT HARD AND AT A HIGHER RPM? MY VAN HAS A CHECK ENGINE CODE OF OPEN EGR VALVE AND THE TRANS IS ACTING LIKE THAT.Asked on 12/13/2011 by FOZZY from Alabama1 answer
CUSTOMER CARE
A:
The transmission uses a special hydraulic fluid under pressure to engage a series of forward gears and one reverse gear, basically transferring the power from the engine to the rear wheels. It has to do this constantly and smoothly every time the vehicle makes a trip. Sometimes the transmission can malfunction or indicate some warning signs before total failure. The transmission fluid level can be one of the most overlooked maintenance chores, responsible for the majority of transmission problems. Dirty or contaminated transmission fluid can cause hard shifting. The transmission filter sits in the pan sump and filters all particulate matter and debris in the fluid. When the screen or filtering device becomes clogged, the pressure flow from the pump becomes restricted, causing a high back-pressure condition. If the vacuum line becomes loose at its connection point, or the diaphragm fails inside the modulator, the transmission will not shift properly. The vacuum line and modulator should also be inspected for proper working order.Answered on 12/13/2011 by John the Car-Doc from AAP
Q:
what is the easyest way to get the bottom bolt off the egr valve does the alternater have to be taken off.Asked on 6/17/2011 by joe b from munhall pa2 answers
A:
Take top bolt out of alternator use pry bar and pry to front of car, wont move much but enough to clear bottom bolt,put something in gap to keep alternator from moveing back, i use 1/4 in. drive rachet,and when done remove 1/4 in rachet and alternator will go back and replace bolt.Answered on 5/6/2012 by jammer from decatur il.CUSTOMER CARE
A:
In order to best answer your question, we need more information and our technicians would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 7/17/2011 by DIY Daniel from AAP
Q:
the bottom bolt is very hard to get off what kind ofpennatrate can i use to get it off.Asked on 6/17/2011 by joe from munhall pa1 answer
CUSTOMER CARE
A:
In order to best answer your question, we need more information and our technicians would be more than happy to assist you if you could please call us at 1-877-ADVANCE (238-2623).Answered on 7/17/2011 by DIY Daniel from AAP
Q:
does the picture of the egr valve also include the sensor in the picture? or do I need to order a separate item?Asked on 5/4/2011 by fisherman joe from moweaqua illinois3 answers
CUSTOMER CARE
A:
No, it does not include the sensor with the egr valve. It has to be ordered separately.Answered on 5/20/2011 by DIY Daniel from AAPA:
It comes completeAnswered on 6/18/2011 by Advance Rob from Greenville, SCA:
The egr sensor is separate, but the picture is as you seeAnswered on 6/18/2011 by Advance Rob from Greenville, SC
Q:
Hi, Do you know if I need to move the alternator inorder to remove the EGR valve and if so where is the tensioner. Also, in addition to the EGR valve what else should be replaced, I have the 3.8 liter.
Thanks,
MikeAsked on 11/7/2010 by Anonymous from Hul, ma3 answers
CUSTOMER CARE
A:
For help with your project, I recommend getting a repair manual specifically for your vehicle. It should be able to help you with detailed instructions on how to do many things.Answered on 11/8/2010 by Mike the Auto Parts Master from AAPA:
Mike,
With the 3.8 liter motor the EGR valva is right in front on your left when facing the motor. You don't have to touch the alternator to get to it. You can work around it with the right tools. I used a short socket with an extension to get to the bottom bolt. The bottom bolt is the hardest part.Answered on 11/13/2010 by John from Virginia
Q:
where is this part on the vanAsked on 10/28/2010 by man from nashville tn1 answer
CUSTOMER CARE
A:
For further assistance, please provide the year, make, model and engine size of your vehicleAnswered on 10/28/2010 by Mike the Auto Parts Master from AAP
Q:
I just put this egr valve in, when I started vehicle afterwoods it sounds as if there is an exhaust leak and while idling if I got the rpm/s up to 3000 the car hesitates like crazy.
any idea what is wrong. 2006 grand caravan sxt 3.8LAsked on 9/18/2010 by sd from nh2 answers
CUSTOMER CARE
A:
Sounds more like a vacuum leak. Are you sure you hooked up all the hoses like they were.Answered on 9/22/2010 by Mike from AAPCUSTOMER CARE
A:
Could be a vacuum leak cheak the hoses make sure they are intact correctly and clamps are tightly fastened.Answered on 9/22/2010 by MARIE from AAP
Q:
where do you find if it has yzz or not yzz?Asked on 5/18/2010 by ted from saratoga2 answers
CUSTOMER CARE
A:
You will find those letter sets in the VIN number of your vehicle. If you look at your VIN number and you see the "yzz" consecutively in the VIN than you have the "YZZ" option. If you do not see the "yzz" in your vin, then you do not have the "YZZ" option.Answered on 5/18/2010 by Mike from AAPA:
Most codes the factory will put them on the valves itself,but you can find out which code you have thru a dealer or with the window sticker.Either way it will have this info in the options section.A code xzz which is listed for this vehicle is for a mid model year vehicle.Answered on 6/3/2010 by chrytech from lancaster
Q:
I understand the EGR sensor is to be changed at the same time as the valve, and that they should be purchased as a set that's calibrated to one another? Or is my information incorrect? I see the parts are available individually, which seems ill-advised if they need to be paired... ??Asked on 3/23/2010 by Zygoma from Statesville, NC1 answer
CUSTOMER CARE
A:
You can buy them individually. as long as the parts are made to fit your vehicle.Answered on 5/13/2010 by Kevin from AAP
Q:
where is it located on engineAsked on 3/9/2010 by Anonymous1 answer
CUSTOMER CARE
A:
It is attached on the intake manifold.Answered on 3/18/2010 by kevin from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
