-
Your Store:
-
Hover over the image to zoom in
BWD Vapor Canister Purge Solenoid
See if this part fits a specific vehicle.
BWD solenoids are manufactured to meet or exceed OE performance.
Back To Top
| Terminal Gender: | Male |
REVIEWS
Reviewed by 1 customer
Displaying review 1
Pros
- Exact part I needed
Cons
- Hard to install
Best Uses
- Small Cars
Comments about BWD Canister Purge Solenoid:
Part was hard to install. If you need to find it on a 1996 Chevy Cavalier,2.2L, Its located at the rear of engine,below throttle body assembly next to block. Need to pry locking tab down that holds solenoid in place on bracket. Hard to get to and reach. Remove 2 vacuum hoses and electrical connector first, pry tab down and solenoid slides off to the right. Its a pain but with a little patience it can be done.
- Car & Truck:
- Auto Enthusiast, Mechanic
- Was this a gift?:
- No
Displaying review 1
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
16 Questions | 17 Answers
Displaying questions 1-10Previous | Next »
Q:
Where is the canister purge solenoid located on a 1998 Chevy Venture ?Asked on 1/11/2013 by chuck from jonesboro, ga1 answer
CUSTOMER CARE
A:
With reference to your query on BWD Canister Purge Solenoid part# CP313, the canister purge solenoid on your 1998 Chevrolet Venture should be located on the gas tank along with the evaporative canister. For more information, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our technicians would be more than happy to assist you.Answered on 1/11/2013 by Rick from AAP
Q:
where is this valve at on a 2001 cadillac deville and would it make it hard to start after refueling the carAsked on 11/14/2012 by flash from ohio1 answer
CUSTOMER CARE
A:
The canister purge solenoid should located on the upper rear part of the throttle body. For further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and one of our representatives would be more than happy to assist you.Answered on 11/15/2012 by Steve from AAP
Q:
Where is this located on a 1996 Buick Roadmaster Limited Sedan? 5.7L V-8Asked on 8/25/2012 by robahawk1 answer
CUSTOMER CARE
A:
The Canister Purge Solenoid on your 1996 Buick Roadmaster limited sedan is on the engine with a red connector on it. It is located on the rear of the engine above the rear valve cover. For any further assistance please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto store and one of our representatives will gladly assist you with any questions or concerns you may have.Answered on 8/25/2012 by John the Car-Doc from AAP
Q:
Where is the canister purge solenoid located on a 96 oldsmobile aurora?Asked on 8/10/2012 by Ghost from Wash.DC1 answer
CUSTOMER CARE
A:
The canister purge solenoid on your Oldsmobile Aurora should be located on top of the engine next to the egr valve. For any further assistance, please visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Answered on 8/10/2012 by Vincent from AAP
Q:
Where is the Canister Purge Solenoid located on a 1996 Lumina van?Asked on 5/16/2012 by Anonymous1 answer
CUSTOMER CARE
A:
The canister purge solenoid on your 1996 Lumina should be located near the throttle body, between it and the egr valve on the drivers side of the engine compartment.Answered on 5/17/2012 by Vincent from AAP
Q:
where is it located?Asked on 5/10/2012 by Michael from butler, PA1 answer
CUSTOMER CARE
A:
To help you in a better manner, if you could please include the year, make, model and engine specification of the vehicle and we would be better able to assist you.Answered on 5/12/2012 by Aaron from AAP
Q:
this wouldnt have anything to do with the trany because my trany feels likes it has a leak or its sliping could this cause it and set off the egr code p0401Asked on 4/21/2012 by jonesy from stanwood, ia1 answer
CUSTOMER CARE
A:
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR. A code P0401 most likely means one or more of the following has happened: The DPFE (differential pressure feedback EGR) sensor is faulty and needs to be replaced. There is a blockage in the EGR (tube), most likely carbon buildup. The EGR valve is faulty. The EGR valve may not be opening due to a lack of vaccuum.Answered on 4/23/2012 by Vincent from AAP
Q:
Where is the canister purge solenoid located on a 98 s-10Asked on 3/22/2012 by Gordon from Chicago1 answer
CUSTOMER CARE
A:
This Canister Purge Solenoid is located on the passenger side of the engine, above the valve cover on your 1998 Chevrolet S-10.Answered on 3/23/2012 by Dennis from AAP
Q:
how many connections are suppose to be on the device it looks like four three on one side and one on the left on a 1998 chevy malibu lsAsked on 3/20/2012 by Anonymous1 answer
CUSTOMER CARE
A:
This BWD Canister Purge Solenoid with Part No. CP313 has a Connector gender of: Female, Male and Male. Number of Electrical Connectors: 1, Number of Hose Connectors: 2, Number of Ports: 2, Number of Terminals: 2, Terminal Gender: Male and Terminal Type: PinAnswered on 3/22/2012 by John the Car-Doc from AAP
Q:
MY CADDY POPS BACK THRU THE INTAKE SOMETIMES WHEN I CRANK IT GOOD YOU GIVE ME SOME INSITEAsked on 11/22/2011 by RUSS 430 from WILMINGTON N.C1 answer
CUSTOMER CARE
A:
It could be a number of things causing this. Unfortunately we are unable to diagnose what is wrong with your vehicle without being able to be there with your vehicle. We highly recommend taking your vehicle to a reputable shop to have them take a look at it to determine the cause.Answered on 11/23/2011 by Steve from AAP
Displaying questions 1-10Previous | Next »
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
