-
Your Store:
-
Hover over the image to zoom in
Wearever Brake Rotor
See if this part fits a specific vehicle.
Wearever Rotors are designed to meet or exceed original equipment design delivering superior stopping power. Proper harmonic design and non-directional finish that eliminates noise and enhances pedal feel. Wearever Rotors are designed to dissipate heat helping to eliminate brake fade and increase the life of your pads. Ready to install out of the box to save you time.
Product Features:
Back To Top
Product Features:
- Manufactured to exacting quality and dimensional specifications for Superior Stopping Power
- Exceeds ISO manufacturing guidelines. (International Organization for Standardization)
- OE vane configuration to dissipate heat, increasing pad life.
- Proper harmonic design helps to reduce brake noise.
- Non-directional finish for less break-in time and reduced brake noise.
- Ready for immediate "out-of-the-box" installation (after cleaning)
Advance Auto Parts Rotor Tips:- Recommend using Wearever Brake Clean to remove residual manufacturing oils prior to installation.
- Always use a torque wrench to tighten wheel bolts to the manufacturers'' specifications to prevent pedal pulsation.
- Always replace rotors in pairs to improve stopping power.
| Bolt Hole And Circle Diameter: | 5-118 |
| Finish: | Ra 1.6 Brake Surf, Ra 3.2-6.3 Other Mach Surf |
| Height: | 51.1 mm |
| Material: | G3000 |
| Outside Diameter: | 278.2 mm |
| Rust Resistant Coating: | No |
| Slotted: | No |
| Solid Or Vented Rotor: | Solid |
| Thickness: | 11 mm |
REVIEW SNAPSHOT®
by PowerReviewsWeareverBrake Rotor - Rear
(based on 31 reviews)
Ratings Distribution
100%
of respondents would recommend this to a friend.
Pros
- Easy to install (29)
- Decreased stopping distance (13)
- No fade (9)
- Lightweight (8)
Cons
Best Uses
- Everyday driving (30)
- Replacement (15)
- Car & Truck:
- Casual driver (11), Auto enthusiast (6), Mechanic (4)
- Reviewer Profile:
- Casual driver (9), Auto enthusiast (3)
Most Liked Positive Review
Budget Friendly
They are good for the buy if you are on a budget and need something that will work. Would have bought more expensive rotors, but these are ok for the everyday driving. No problems...Read complete review
They are good for the buy if you are on a budget and need something that will work. Would have bought more expensive rotors, but these are ok for the everyday driving. No problems!
VS
Most Liked Negative Review
Not a bad product
The product was overhaul great. The only problem I noticed after the fact is it was an open box that someone had installed and returned. There was some deep marks where someone hit it ...Read complete review
The product was overhaul great. The only problem I noticed after the fact is it was an open box that someone had installed and returned. There was some deep marks where someone hit it with a hammer and I had to file off the landing surface. I think the associate behind the counter intentionally put that one on the bottom so I would not see it until I went to use it. Once I saw it, I had to install it as I already had the car dismantled. Once complete, I took the test drive and the brakes worked fine. I did an entire brake job on the front and back. No squeling and good stopping.
REVIEWS
Reviewed by 31 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
- Decreased Stopping Distance
- Easy To Install
- No Fade
Cons
Best Uses
- Everyday Driving
- Replacement
- Restoration
Comments about Wearever Brake Rotor - Rear:
Replacement part
Pros
- Easy To Install
- No Fade
Cons
Best Uses
- Everyday Driving
- Replacement
- Restoration
Comments about Wearever Brake Rotor - Rear:
Wearever Rotors have never given me any issues. Great price and always in stock.
Pros
- Easy To Install
- Lightweight
- No Fade
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Wearever Brake Rotor - Rear:
Replaced my OEM. I have had no problems with it.
Pros
Cons
Best Uses
- Everyday Driving
Comments about Wearever Brake Rotor - Rear:
Good disc for the price.. never had any issues.
Pros
- Decreased Stopping Distance
- Lightweight
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Wearever Brake Rotor - Rear:
Good product will see how long they last.
Pros
- Decreased Stopping Distance
- Easy To Install
- Lightweight
- No Fade
Cons
Best Uses
- Everyday Driving
- Replacement
Comments about Wearever Brake Rotor - Rear:
none
Pros
- Easy To Install
Cons
- None
Best Uses
- Everyday Driving
- Replacement
Comments about Wearever Brake Rotor - Rear:
Good Value -- replacement part -- exact fit -- easy installation -- would buy again.
Pros
- Decreased Stopping Distance
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Wearever Brake Rotor - Rear:
good rotors
Pros
- Easy To Install
Cons
Best Uses
- Replacement
Comments about Wearever Brake Rotor - Rear:
The product was overhaul great. The only problem I noticed after the fact is it was an open box that someone had installed and returned. There was some deep marks where someone hit it with a hammer and I had to file off the landing surface. I think the associate behind the counter intentionally put that one on the bottom so I would not see it until I went to use it. Once I saw it, I had to install it as I already had the car dismantled. Once complete, I took the test drive and the brakes worked fine. I did an entire brake job on the front and back. No squeling and good stopping.
Pros
- Easy To Install
Cons
Best Uses
- Everyday Driving
Comments about Wearever Brake Rotor - Rear:
No other comments
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
7 Questions | 9 Answers
Displaying questions 1-7
Q:
Are rotors sold in a set?Asked on 3/13/2013 by Shae1 answer
CUSTOMER CARE
A:
The Wearever Brake Rotor (Part No. YH145155) is sold individually. For any further assistance, please feel free to call us at: 1-877-238-2623 or visit the nearest Advance Auto Parts store and one of our Parts Pros will gladly assist you with any questions or concerns you may have.Answered on 3/13/2013 by Steve from AAP
Q:
Is the center part of this rotor black? They look much better when you see the black through the rim and not plain rusty metal.Asked on 6/22/2012 by bcbart821 answer
CUSTOMER CARE
A:
No, the center portion of this part Wearever Brake Rotor - Rear, Part No. YH145155 is not black. The Color / Finish of this rotor is Metallic.
For compatibility of this part with your vehicle, please provide your vehicle make, model and engine specification.
For any further assistance, please feel free to call us at 1-877-238-2623 or visit your nearest Advance Auto Parts store and our representatives would be more than happy to assist you.Answered on 6/23/2012 by Aaron from AAP
Q:
My 2000 Grand am se Has drum s on the rear. How do I convert to disk?Asked on 10/29/2011 by Anonymous1 answer
CUSTOMER CARE
A:
I would suggest taking your vehicle to a certified mechanic for a proper diagnosis before buying and having parts installed that may not (solve/be) the problem.Answered on 10/31/2011 by Steve from AAP
Q:
Is this a pair of rotors or just one.In other words do I need to order 2Asked on 10/27/2010 by Robin from Sellersville Pa1 answer
CUSTOMER CARE
A:
Our rotors are sold individually.Answered on 10/27/2010 by Kevin the King of Auto Parts. from AAP
Q:
so this fits any 04' impala? or just the 3.4 liter, base impala?Asked on 8/11/2010 by johnp410 from maryland1 answer
CUSTOMER CARE
A:
Yes it should fit i've looked it up using all models and liters of the 2004 Impala and it specifies it fits.Answered on 8/11/2010 by MARIE from AAP
Q:
Can I install these myself? Do I need any special tools?Asked on 4/28/2010 by Mike from Prospect, PA3 answers
VERIFIED BUYER
A:
Anybody with some mechanical background and knowledge of how to use tools could install these. The only special tools needed would be metric wrenches and maybe a c-clamp to push in the caliper piston to make room for the new pads on the new rotor.Answered on 7/13/2010 by Don G.--you can call me dong for short from Janesville, WICUSTOMER CARE
A:
You should only need wrenches, maybe a ratchet and socket set, and possibly screw drivers.Answered on 4/28/2010 by Mike from AAPA:
You'll also need a C Clamp to depress the caliper piston. Either that or get yourself a piston depression tool. Most auto parts stores have them now and they go for 5 - 10 dollars. Be sure to pop the cap on the master cylinder in the engine compartment before you do so you don't create back pressure in the brake lines. Wait to fill the master cylinder (if needed) until after you've replaced the pads as depressing the piston will push the fluid back to the master cylinder.Answered on 5/11/2010 by Rex'n'effex from Syracuse, NY
Q:
Is this for the rear or front?Asked on 1/4/2010 by Anonymous1 answer
CUSTOMER CARE
A:
This is for the rear brakes.Answered on 1/5/2010 by Mike from Advance Auto Parts
Displaying questions 1-7
Disclaimer
We strive to keep all information accurate and up-to-date; however, product availability, pricing, promotions and store hours are subject to change without notice. Please contact
Customer Care
if you have any questions or corrections.
