-
Your Store:
-
See if this part fits a specific vehicle.
| Bracket included: | Yes |
| Caliper Material: | Aluminum |
| Finish: | Blasting + Anti-Rust |
| Hardware Included: | Yes |
| Location: | Rear Left, Rear Right |
| Mounting Hardware Included: | No |
| OE Replacement: | Yes |
| Pads Included: | No |
| Performance: | No |
| Piston Material: | Phenolic |
| Piston Quantity: | 1 |
REVIEW SNAPSHOT®
by PowerReviewsPros
Cons
Best Uses
Most Liked Positive Review
High quality remanufactured part
Bought both rear calipers for my Olds Bravada.
This kit has everything including the mounting bracket, guide pins, mounting bolts, rubber boots, banjo bolt, copper washers and spring clips. Everything ...Read complete review
Bought both rear calipers for my Olds Bravada.
This kit has everything including the mounting bracket, guide pins, mounting bolts, rubber boots, banjo bolt, copper washers and spring clips. Everything assembled quickly and easily. Pop in some new pads and you'll have each wheel done in about 10 minutes.
Another review mentioned damaged threads where the banjo bolt screws in. Mine were perfect on both calipers and the new banjo bolts were screwed into place "finger tight" by the manufacturer.
I ordered online with a coupon code and picked up locally. Price is so low (after core return) that it's worth replacing both sides even if only one is bad.
VS
Most Liked Negative Review
Banjo Bolt threads screwed up.
After I lubed the parts and installed both rear calipers I noticed the Banjo Bolt on one didn't want to start and the other one went in crooked.
The threads look terribl...Read complete review
After I lubed the parts and installed both rear calipers I noticed the Banjo Bolt on one didn't want to start and the other one went in crooked.
The threads look terrible and not up to any kind of specs.
So tomorrow I will go to a hardware store and find a tap to fix the threads.
Not a good way to start or finish a parts switch.
REVIEWS
Reviewed by 14 customers
Sort by
Displaying reviews 1-10
Previous | Next »
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
the box was mark for a left caliper , it had a right caliper
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
REPLACEMENT OF REAR CALIPER AND PADS; ALL WENT VERY EASILY. I'VE DRIVEN ABOUT 2000 MILES WITH NO PROBLEMS
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
GOOD PRICE.
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
Perfect fit. Good price.
Saved me a lot of money based on what the mechanic wanted to charge to replace.
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
EASY TO PUT ON
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
Can't go wrong
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
Even though the website and the box says it fits right or left side, part number SLC 628 is for the DRIVER SIDE and SLC 629 is for PASSENGER SIDE. Ohter than that, no issues with this part.
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
was easy to install and a perfect OE match
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
Easy to install, comes with all hardware... Just put pads in and bolted straight on w/ 2 bolts
Pros
Cons
Best Uses
Comments about Fenco Disc Brake Caliper, Rear Left:
used but reconditioned to like-new. who sees it?
Do you have questions about this product?(earn points for answers!)
Ask a question, get answers from real customers and in-house experts. Or contact Customer Care by email or call 1-877-238-2623.
Q:
What banjo bolt goes with the c629? The Bolt listed for my vehicle doesn't hold brake fluid and dumps all over the ground.1 answer
CUSTOMER CARE
A:
The Fenco Brake Caliper with Mounting Bracket - part# SLC629 is vehicle specific. In order to locate the exact bolts, please provide the year, make, model and engine size of the vehicle. For any further assistance, you may also visit your nearest Advance Auto store or call us directly at 1-877-ADVANCE (238-2623) and one of our representatives there would be more than happy to assist you.Q:
Hi,1 answer
CUSTOMER CARE
A:
In order for us to further assist you, would you please provide us with the year, make, model, and engine size of your vehicle.Q:
I just replaced to brakes and rotor and getting a bad smell like the brakes are burning but just on one side is this normal or is the caliper bad1 answer
CUSTOMER CARE
A:
There are a few things that could be causing this. One is that either the brake pads or brake rotors are the wrong part, or the caliper has locked up. Another cause for this is the incorrect installation of the items. I would give everything a second looking over to see if you notice anything, and if you can't, take your vehicle to a brake shop to have it looked over.